1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your BONTEC Swivel TV Stand, Model ST14. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to securely hold most LED, OLED, LCD, and Plasma flat or curved televisions ranging from 42 to 86 inches, with a maximum weight capacity of 50 kg (110 lbs).
The stand features a robust cold-rolled steel construction, a stable 10mm tempered glass base, and offers height adjustment and a 25-degree swivel function for optimal viewing angles. Integrated cable management helps maintain a tidy appearance.
Image 1.1: Front view of the BONTEC Swivel TV Stand (Model ST14).
Image 1.2: Illustrates the benefit of using the BONTEC TV stand compared to standard TV feet, offering better positioning and stability.
2. Safety Information
WARNING: Failure to read and follow all instructions may result in personal injury or property damage.
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or defective.
- This stand is designed for televisions between 42 and 86 inches and weighing up to 50 kg (110 lbs). Do not exceed the maximum weight capacity.
- Verify your TV's VESA mounting pattern is compatible with the stand (200x200mm to 800x600mm).
- Assemble the stand on a soft, clean surface to prevent scratches.
- Always use two people to lift and position the television onto the stand.
- Keep children and pets away during assembly.
- Do not overtighten screws, as this may cause damage.
- Ensure the stand is placed on a stable, level surface.
3. Package Contents
Please check that all parts are included in your package. While specific part numbers are not listed here, the package typically includes:
- Main support column
- Tempered glass base
- TV mounting plate
- Two TV mounting arms (hooks)
- Various screws, washers, and spacers for TV attachment (labeled A-Z or similar)
- Assembly hardware for the stand components
- Cable management clips
- Non-slip rubber feet for the base
- Safety rope (anti-tip strap)
- Assembly tools (e.g., Allen key, wrench)
- Instruction manual
Image 3.1: Key features including security locks, non-slip feet, cable management clips, and safety rope.
4. Assembly Instructions
Assembly typically takes less than 15 minutes. Follow the step-by-step diagrams provided in your package. The general steps are:
- Attach the Support Column to the Base: Secure the main support column to the tempered glass base using the provided screws and tools. Ensure it is firmly attached.
- Install the TV Mounting Plate: Attach the TV mounting plate to the support column at your desired initial height. The plate offers 3 levels of height adjustment, with each level providing a 65mm change.
- Attach Mounting Arms to TV: Identify the correct screws, washers, and spacers for your TV's VESA pattern. Attach the two TV mounting arms to the back of your television. Ensure the arms are level and securely fastened. The arms also have 2 height adjustment levels (50mm each) for fine-tuning.
- Mount TV onto Stand: With assistance, carefully lift the television and hook the mounting arms onto the TV mounting plate. Engage the security locks to prevent accidental dislodgement.
- Cable Management: Route your TV cables through the integrated cable management clips on the support column for a neat setup.
- Install Safety Rope: For added stability and anti-tip protection, attach the safety rope from the stand to a wall stud or furniture.
Image 4.1: VESA compatibility patterns (200x200mm to 800x600mm) and supported screen sizes (42-86 inches).
Image 4.2: Height adjustment options, showing minimum (640mm) and maximum (770mm) heights, and adjustments for both the TV plate (3 levels, 65mm each) and the hook arms (2 levels, 50mm each).
5. Operating Instructions
5.1. Height Adjustment
The BONTEC TV Stand offers multiple height adjustment options to achieve your preferred viewing level:
- TV Plate Adjustment: The main TV mounting plate can be set at 3 different height levels on the support column. Each adjustment changes the height by 65mm. To adjust, you will need to unmount the TV, reposition the plate, and re-mount the TV.
- Mounting Arm Adjustment: The TV mounting arms themselves have 2 additional height settings, allowing for a 50mm adjustment. This can be done while the arms are attached to the TV, but the TV must be unmounted from the stand to access these settings.
5.2. Swivel Function
The TV mounting plate allows the attached television to swivel up to 25 degrees to the left and 25 degrees to the right. This feature enables you to adjust the viewing angle without moving the entire stand. Simply grasp the sides of your television and gently rotate it to the desired angle.
Image 5.1: Illustration of the TV stand's 25-degree swivel capability for optimal viewing.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the stand. For the tempered glass base, a glass cleaner can be used. Avoid abrasive cleaners or solvents that may damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
- Weight Limit: Do not place items exceeding the stand's weight capacity on the base or attempt to mount a TV heavier than 50 kg.
7. Troubleshooting
7.1. TV is not level
- Check that the TV mounting arms are installed at the same height on the back of your TV.
- Ensure the TV mounting plate is securely fastened to the support column and is not tilted.
- Verify the stand is placed on a perfectly level surface.
7.2. Stand feels unstable
- Confirm all assembly screws are tightened properly.
- Ensure the tempered glass base is fully seated and secured to the support column.
- Verify the TV weight does not exceed 50 kg and is within the recommended screen size range.
- Make sure the stand is on a flat, stable surface.
- Utilize the provided safety rope to secure the stand to a wall or furniture.
7.3. Cables are messy
- Use the integrated cable management clips on the rear of the support column to organize and conceal cables.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | ST14 |
| Compatible TV Sizes | 42 - 86 inches |
| Maximum Weight Capacity | 50 kg (110 lbs) |
| VESA Compatibility (mm) | 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400, 600x600, 800x600 |
| Material | High-grade cold-rolled steel, Tempered glass base |
| Base Dimensions (L x W) | 600 mm x 400 mm |
| Tempered Glass Thickness | 10 mm |
| Height Adjustment (TV Plate) | 3 levels, 65 mm per level |
| Height Adjustment (Mounting Arms) | 2 levels, 50 mm per level |
| Swivel Angle | ±25 degrees |
| Color | Black |
Image 8.1: Illustration of the stand's maximum load capacity of 50 kg.
Image 8.2: Dimensions of the polished 10mm tempered glass base (600mm x 400mm).
9. Warranty and Support
Information regarding specific warranty terms and customer support contacts is not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for warranty details and support contact information.
