CATLINK CL-LBPS-01

Download PDF
Contents

CATLINK Ramp User Manual

Model: CL-LBPS-01

1. Introduction

The CATLINK Ramp is an accessory designed to enhance the accessibility and cleanliness of your CATLINK Prox Self-Cleaning Cat Litter Box. This ramp provides an easier entry point for cats with limited mobility, kittens, and elder cats, while also effectively trapping litter from paws to maintain a cleaner environment.

CATLINK Ramp accessory for self-cleaning litter box with a cat using it

Image 1.1: The CATLINK Ramp providing easy access to the litter box.

2. Key Features

  • Enhanced Accessibility: With a height of 6 inches, the ramp facilitates comfortable and easy entry for elder cats, kittens, and cats with mobility challenges.
  • Effective Litter Trapping: The perforated surface of the ramp is designed to collect litter from your cat's paws as they exit, reducing tracking outside the litter box.
  • Integrated Storage Space: The hollow interior of the ramp offers convenient storage for litter box liners, cat litter, or other small pet supplies.
  • Stable and Secure: Equipped with a slip-resistant base, the ramp remains firmly in place during use.
  • Easy to Clean: Constructed from durable PP material, all parts of the ramp are immersible in water for thorough cleaning. The grid cover can be easily opened for access.
Close-up of cat paw on ramp showing litter being trapped by the grid design

Image 2.1: The ramp's grid design effectively traps litter from paws.

3. Setup

  1. Unpack: Carefully remove the CATLINK Ramp from its packaging.
  2. Position: Place the ramp directly in front of the entrance of your CATLINK Prox Self-Cleaning Cat Litter Box. The ramp is designed to align perfectly with the contours of the litter box.
  3. Ensure Stability: Verify that the ramp is stable and does not wobble. The non-slip base should provide adequate grip on most floor surfaces.
CATLINK Ramp in white, compatible with Scooper Pro-X and Scooper Young litter boxes

Image 3.1: The CATLINK Ramp positioned in front of a compatible litter box.

4. Operating

Once set up, the CATLINK Ramp operates passively. Cats will naturally use the ramp to enter and exit the litter box. As they walk across the perforated surface, any litter clinging to their paws will fall through the holes and be collected within the ramp's base, significantly reducing litter tracking in your home.

4.1. Utilizing Internal Storage

The ramp features a hollow interior that can be used for storage. To access this space, gently lift the grid cover. You can store items such as litter box liners, small bags of cat litter, or other pet sundries here to keep them organized and easily accessible.

CATLINK Ramp with its top cover removed, showing internal storage space with items inside

Image 4.1: The internal storage compartment of the ramp.

5. Maintenance

  1. Emptying Collected Litter: Periodically open the rear side exit on the ramp to dump the collected litter back into the litter box or into a waste receptacle.
  2. Cleaning the Ramp: The entire ramp, made of PP material, can be immersed in water for cleaning. You can also easily open the grid cover for a more thorough clean. Use mild soap and water, then rinse thoroughly and allow to air dry completely before reassembling.
  3. Inspecting Non-slip Mats: Regularly check the non-slip mats on the base of the ramp for wear or dirt. Clean them as needed to ensure continued stability.
Underside of CATLINK Ramp showing non-slip mats

Image 5.1: Non-slip mats on the base of the ramp for stability.

6. Troubleshooting

  • Excessive Litter Tracking:
    • Ensure the ramp is correctly positioned flush against the litter box entrance.
    • Regularly empty the collected litter from the ramp's base.
    • Consider the type of litter used; some litters may track more than others.
  • Ramp Movement/Instability:
    • Check the non-slip mats on the bottom of the ramp. Clean them if they are dusty or dirty.
    • Ensure the ramp is placed on a flat, stable surface.
  • Cat Reluctance to Use Ramp:
    • Allow your cat time to adjust to the new accessory.
    • Place familiar toys or treats on the ramp to encourage exploration.
    • Ensure the ramp is clean and free of strong odors.

7. Specifications

Model Number CL-LBPS-01
Product Dimensions (L x W x H) 25.6" x 16.8" x 11.6"
Item Weight 11 pounds
Material Plastic, Polypropylene (PP)
Color Full White
Compatibility CATLINK Prox Self-Cleaning Cat Litter Box
Diagram showing the dimensions of the CATLINK Ramp: 25.6 inches length, 16.8 inches width, 11.6 inches height

Image 7.1: Dimensions of the CATLINK Ramp.

8. Warranty and Support

8.1. Warranty Information

The CATLINK Ramp (Model CL-LBPS-01) comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

8.2. Customer Support

For any questions, technical assistance, or warranty inquiries, please visit the official CATLINK website or contact CATLINK customer service through the contact information provided with your product packaging. You can also visit the CATLINK Store on Amazon for more information.

© 2026 CATLINK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.