Auriol Wireless Weather Station

1. Introduction

Thank you for choosing the Auriol Wireless Weather Station. This device provides accurate indoor and outdoor temperature readings, displays the date and day of the week, and includes a radio-controlled clock with two adjustable alarm times and a frost warning function. This manual will guide you through the setup, operation, and maintenance of your new weather station.

Please read these instructions carefully before first use and keep them for future reference.

2. Safety Information

• Do not expose the main unit to direct sunlight, extreme temperatures, or high humidity.
• The outdoor sensor is splash-proof (IPX4) but should not be submerged in water.
• Use only the specified battery type and ensure correct polarity.
• Keep batteries out of reach of children.
• Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
• Dispose of batteries and the device according to local environmental regulations.

3. Package Contents

Please check the package for the following items:

• 1 x Auriol Wireless Weather Station (Main Unit)
• 1 x Wireless Outdoor Sensor
• 4 x Alkaline Batteries
• 1 x User Manual
• Mounting Material

4. Product Overview

Image Description: This image displays the Auriol Wireless Weather Station. On the right is the main display unit, a black rectangular device with a large digital screen showing indoor temperature (23.3°C), date (29 5 FR), outdoor temperature (25.2°C), current time (20:15:59), and two alarm settings (6:00 and 7:00). Below the screen are four buttons: 'SET', '+', 'MODE', and '-'. On the left is the wireless outdoor sensor, a smaller black rectangular unit, also displaying a temperature (23.3°C) on its small screen.

Main Unit (Front View):

• Display: Shows indoor/outdoor temperature, time, date, day of week, alarm settings.
• SET Button: Enters setting mode for time, date, and alarms.
• + Button: Increases values or navigates options in setting mode.
• MODE Button: Switches between display modes (e.g., time, alarm).
• - Button: Decreases values or navigates options in setting mode.

Wireless Outdoor Sensor:

• Display: Shows current outdoor temperature.
• Battery Compartment: Located on the back.
• Mounting Hole: For wall mounting.

5. Setup

5.1 Battery Installation

1. Main Unit: Open the battery compartment on the back of the main unit. Insert the specified alkaline batteries (e.g., 2x AA or AAA, refer to the compartment markings) ensuring correct polarity (+/-). Close the compartment.
2. Outdoor Sensor: Open the battery compartment on the back of the outdoor sensor. Insert the specified alkaline batteries (e.g., 2x AA or AAA) ensuring correct polarity (+/-). Close the compartment.

5.2 Initial Synchronization

After inserting batteries, the main unit will automatically attempt to connect with the outdoor sensor and receive the radio-controlled time signal. This process may take a few minutes.

• Place the outdoor sensor within range (up to 100m in open field) of the main unit.
• Ensure there are no major obstructions (e.g., thick walls, large metal objects) between the units that could interfere with the signal.
• The outdoor temperature should appear on the main unit's display once connected.

5.3 Placement

• Main Unit: Can be placed on a flat surface using its integrated stand or wall-mounted using the hanging hole on the back. Place it indoors, away from direct heat sources or air conditioning vents.
• Outdoor Sensor: Can be placed on a flat surface or wall-mounted. For accurate readings, place it in a shaded area, protected from direct rain and sunlight. While splash-proof, excessive exposure to harsh weather conditions should be avoided.

6. Operating Instructions

6.1 Setting Time and Date

1. Press and hold the SET button until the time display starts flashing.
2. Use the + or - buttons to adjust the hour. Press SET to confirm and move to minutes.
3. Repeat for minutes, year, month, and day.
4. Press SET to exit the setting mode. The radio-controlled time will automatically update if a signal is received.

6.2 Setting Alarms (Alarm 1 & Alarm 2)

1. Press the MODE button repeatedly until "ALARM 1" or "ALARM 2" is displayed.
2. Press and hold the SET button until the alarm time starts flashing.
3. Use the + or - buttons to adjust the alarm hour. Press SET to confirm and move to minutes.
4. Repeat for minutes. Press SET to exit.
5. To activate/deactivate an alarm, press the MODE button while the alarm time is displayed. An alarm icon will appear/disappear.

6.3 Temperature Display

• The main unit displays both indoor ("IN") and outdoor ("OUT") temperatures simultaneously.
• To switch between Celsius (°C) and Fahrenheit (°F), locate the °C/°F switch on the back of the main unit (if available) or press a specific button (refer to on-screen prompts or detailed manual if not obvious).

6.4 Frost Warning Function

The weather station features a frost warning function. When the outdoor temperature drops to a certain threshold (typically around 0°C / 32°F), a frost warning icon will appear on the display to alert you to potential icy conditions.

6.5 Manual Radio Signal Deactivation

In some environments, radio signal interference might occur. If desired, the radio signal reception can be manually deactivated. Refer to the detailed manual for specific button combinations or settings to perform this action.

7. Maintenance

• Cleaning: Wipe the main unit and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries in both units when the low battery indicator appears on the display. Always replace all batteries at the same time.
• If the device will not be used for an extended period, remove the batteries to prevent leakage.

8. Troubleshooting

9. Specifications

• Model: AU788
• Power Source (Main Unit): Battery powered (type not specified, typically AA/AAA)
• Power Source (Outdoor Sensor): Battery powered (type not specified, typically AA/AAA)
• Wireless Range: Approx. 100 m (in open field)
• Outdoor Sensor Protection: Splash-proof (IPX4)
• Dimensions (Main Unit): Approx. 8 cm (W) x 9 cm (H) x 3 cm (D)
• Functions: Indoor/Outdoor Temperature, Date, Day of Week, Radio-controlled Clock, 2 Alarms, Frost Warning.

10. Warranty and Support

This product is manufactured by Auriol. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Auriol website.

Information regarding the availability of spare parts for this product is currently unavailable.