Milescraft 3406 GrabberPRO User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of the Milescraft 3406 GrabberPRO. The GrabberPRO is an adjustable push block designed to enhance safety and precision when working with various woodworking machinery, including table saws, router tables, jointers, and band saws.

Its primary function is to maintain consistent contact with the workpiece, reducing the risk of kickback and ensuring controlled material feed during cutting or shaping operations.

2. Safety Information

Always prioritize safety when operating power tools. The GrabberPRO is a safety accessory designed to assist in safe operation, but it does not replace proper safety practices.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and dust masks.
• Ensure the workpiece is securely held and stable before beginning any operation.
• Never place hands directly in line with cutting blades or router bits.
• Keep the work area clean and free of obstructions.
• Familiarize yourself with the operation of your power tools before using the GrabberPRO.
• Inspect the GrabberPRO for any damage before each use. Do not use if damaged.
• Ensure the non-marring grip pads are clean and free of debris for optimal traction.

3. Components and Parts List

The Milescraft GrabberPRO includes the following components:

• Main Body with ergonomic handle
• Adjustable Heel
• Support Foot
• Interchangeable Legs: 1", 1/2", 1/4", and 1/8" (one of each)
• Hardware for assembly and adjustment

Figure 3.1: All components of the Milescraft GrabberPRO, including the main body, various leg sizes, support foot, and adjustable heel.

4. Setup and Assembly

The GrabberPRO is designed for quick and easy setup. Follow these steps to prepare your GrabberPRO for use:

1. Select Appropriate Legs: Choose the leg size (1", 1/2", 1/4", or 1/8") that best suits the height of your workpiece and the specific tool you are using. The legs are interchangeable to provide optimal contact and control.
2. Attach Legs: Securely attach the chosen legs to the main body of the GrabberPRO using the provided hardware. Ensure they are firmly tightened to prevent movement during operation.
3. Adjust Heel: The adjustable heel can be positioned to provide additional forward control. It can also be lowered or cut through for specific applications, such as when making through cuts.
4. Inspect Grip Pads: Verify that the non-marring grip pads on the bottom of the GrabberPRO are clean and intact. These pads are crucial for maintaining a secure hold on the workpiece.

Figure 4.1: The GrabberPRO demonstrating its adjustable leg design, allowing customization for various workpiece heights and tool applications.

5. Operating Instructions

The GrabberPRO is designed to provide superior control and safety during woodworking operations. Follow these guidelines for effective use:

5.1 General Operation

• Position the GrabberPRO firmly on top of the workpiece.
• Apply downward pressure to keep the workpiece flat against the table surface.
• Apply forward pressure to feed the workpiece through the cutting tool.
• The multi-leg design allows the GrabberPRO to straddle the saw blade or router bit, maintaining contact on both sides of the workpiece for enhanced stability and kickback reduction.

Figure 5.1: The GrabberPRO being used on a table saw, illustrating how the heel provides extra forward control during cuts.

5.2 Using with Table Saws

• When ripping, ensure the GrabberPRO's legs are positioned on either side of the saw blade. This allows continuous contact with both sides of the material, minimizing kickback.
• Maintain consistent pressure throughout the cut.
• The GrabberPRO enables cutting of thin strips, down to 1/8" thick, by providing stable support close to the blade.

Figure 5.2: The GrabberPRO being used on a table saw, demonstrating its adjustable design to straddle the blade while maintaining workpiece contact.

5.3 Using with Router Tables

• Use the GrabberPRO to feed material over the router bit, keeping hands safely away from the cutting area.
• The downward pressure helps prevent workpiece lift, ensuring clean and consistent profiles.

5.4 Using with Band Saws and Jointers

• The GrabberPRO provides a secure grip and controlled feed for these tools, enhancing safety and accuracy.
• Apply even pressure to guide the material smoothly.

Figure 5.3: The GrabberPRO providing maximum strength grip on a workpiece being fed into a band saw, ensuring safe and controlled operation.

6. Maintenance

Proper maintenance will ensure the longevity and continued effectiveness of your Milescraft GrabberPRO.

• Cleaning: After each use, wipe down the GrabberPRO with a dry cloth to remove sawdust and debris. For stubborn residue, a damp cloth can be used, followed by thorough drying.
• Grip Pads: Periodically check the non-marring grip pads for wear or damage. Clean them regularly to ensure maximum traction. If they become excessively worn, contact Milescraft for replacement parts.
• Storage: Store the GrabberPRO in a clean, dry place away from direct sunlight and extreme temperatures.
• Inspection: Before each use, inspect all components, especially the legs and adjustable heel, for any signs of damage, cracks, or loose connections.

7. Troubleshooting

This section addresses common issues you might encounter with your GrabberPRO.

8. Specifications

9. Warranty Information

The Milescraft GrabberPRO comes with a 3-year warranty. For detailed warranty terms and conditions, please refer to the official Milescraft website or contact customer support.

10. Customer Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official Milescraft website or contact their customer service department.

You can find more information and products from Milescraft by visiting their store on Amazon: Milescraft Amazon Store.