SmartHeart Blood Pressure Monitor

Introduction

The SmartHeart Blood Pressure Monitor is designed for convenient and accurate blood pressure measurement at home. This device features an attached upper arm cuff and advanced inflation technology for a comfortable and efficient user experience. Regular home monitoring can provide valuable insights into your blood pressure trends, which should be discussed with your healthcare professional for interpretation.

Important Safety Information

Please read and understand all safety precautions before using the device. Failure to do so may result in inaccurate readings or injury.

• Prolonged over-inflation may cause congestion, swelling, or bruising in some individuals.
• Wait a minimum of 2 minutes between measurements; 20 minutes is recommended. Excessive frequent measurements may restrict blood circulation.
• Do not use this device while connected to any monitoring equipment on the same limb.
• Consult with your healthcare professional for guidance if you have an intravascular shunt or have undergone a mastectomy on the arm corresponding to the measurement side.
• Consult with your healthcare professional before using the device during pregnancy, including pre-eclampsia, or if diagnosed with arrhythmia or arteriosclerosis.
• If you experience any discomfort or an abnormality occurs, stop using the device immediately. To stop the device during operation, press the U1 or U2 (POWER) buttons, and the cuff will automatically deflate.

Package Contents

Verify that all items are present in your SmartHeart Blood Pressure Monitor package:

• SmartHeart Blood Pressure Monitor with attached nylon arm cuff
• Storage case
• DC wall adapter
• Rechargeable battery (pre-installed)
• Detailed English/Spanish instructions
• Quick start guide
• FAQ pamphlet
• Blood pressure charting log

Image: SmartHeart Blood Pressure Monitor in its retail packaging, showing the device and key features.

Setup and Initial Use

Charging the Battery

The monitor includes an internal rechargeable lithium battery. Connect the provided DC wall adapter to the monitor and a power outlet to charge the device. A full charge ensures optimal performance and convenience.

Setting Up User Profiles and Time/Date

The monitor features 2-person memory banks, each storing up to 250 measurements. Refer to the detailed instructions for setting the current date and time, and for assigning measurements to User 1 (U1) or User 2 (U2).

Operating Instructions

Cuff Application

The SmartHeart monitor features an attached wide-range arm cuff (8.6” – 16.5” / 22 cm – 42 cm) with a D-ring style for easy application. Ensure the cuff fits snugly but not too tightly on your upper arm, approximately 1 inch above the elbow. The air tube should run down the center of your arm in line with your middle finger.

Image: A man demonstrating the correct placement of the SmartHeart Blood Pressure Monitor on his upper arm.

Image: A diagram illustrating the wide-range arm cuff, its dimensions, and guidance on how to choose the proper cuff size by measuring arm circumference.

Taking a Measurement

1. Rest your elbow on a solid surface with your palm facing upward. Elevate your arm so that the cuff is at the same level as your heart. You may support your hand with a folded towel or book. Relax your left hand.
2. When the monitor is off, press the U1/SET or U2 (POWER) button to power on the monitor. The unit will run a self-test.
3. The display will briefly show '0' before the measurement begins.
4. The numbers will increase on the digital display during measurement as the cuff inflates. This monitor utilizes Advanced Inflation Technology, taking your reading during cuff inflation for faster measurement time and less time with your arm compressed.
5. When the measurement is complete, the cuff will automatically deflate, and your blood pressure measurement (systolic and diastolic) and pulse reading results will show on the display screen simultaneously.

Image: Front view of the SmartHeart Blood Pressure Monitor, showing the digital display with blood pressure and pulse readings.

Image: A diagram explaining the benefits of Advanced Inflation Technology, highlighting accurate results in under a minute and more comfortable measurements.

Interpreting Your Results

• Hypertension Indicator: The display includes a visual Hypertension Indicator that assesses if your reading falls within the globally accepted World Health Organization standards.
• Irregular Heartbeat Detection: An Irregular Heartbeat Icon will appear on the display if an irregular heartbeat was detected during the measurement.

Memory Function

The reading will automatically be stored in the USER Memory Bank selected at the start of the reading, with up to 250 readings per user. This allows for tracking of results over time.

Turning Off the Device

Select U1/SET or U2 (POWER) button to turn the unit off and conserve energy and battery life. The unit will automatically shut-off approximately 1 minute after use.

Maintenance

To ensure the longevity and accuracy of your SmartHeart Blood Pressure Monitor, follow these maintenance guidelines:

• Cleaning: Wipe the monitor and cuff with a soft, dry cloth. If necessary, use a slightly damp cloth with mild soap, then wipe dry. Do not use abrasive cleaners or immerse the device in water.
• Storage: Store the monitor in its provided storage case in a cool, dry place, away from direct sunlight, extreme temperatures, and humidity.
• Battery: Recharge the battery as needed. If the device will not be used for an extended period, ensure it is fully charged before storage.

Troubleshooting

If you encounter issues with your SmartHeart Blood Pressure Monitor, refer to the following common solutions. For problems not listed here, consult the detailed FAQ pamphlet included with your device or contact customer support.

• No Power/Display Not Turning On: Ensure the battery is charged. Connect the DC wall adapter to charge the device.
• Inaccurate Readings:
  • Verify correct cuff placement and size. An incorrect cuff size can lead to inaccurate readings.
  • Ensure you are resting quietly for at least 5 minutes before taking a measurement.
  • Avoid talking or moving during the measurement.
  • Ensure the cuff is at heart level.
  • Wait at least 2 minutes between measurements.
• Error Messages: Refer to the detailed instruction manual or FAQ for specific error codes and their meanings. Common errors often relate to cuff pressure or movement during measurement.

Specifications

Warranty Information

The SmartHeart Blood Pressure Monitor comes with a 5-year limited warranty. Please refer to the warranty card included in your package for full terms and conditions regarding coverage and claims.

Customer Support

For further assistance, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official SmartHeart website. Always have your model number (01-509) and purchase details ready when contacting support.