Introduction
The Vont App-Controlled Car Lights system allows you to customize your vehicle's interior lighting with a wide range of colors and effects. This system features 16 million color options, 30 unique scene modes, music synchronization, and a DIY mode for personalized lighting. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and safety.
What's in the Box
- 21-feet LED strip light
- Controller
Safety Information
This product is designed with safety in mind. Please observe the following precautions:
- The LED strip light is flame retardant and water-resistant.
- It features high-temperature resistance for safe operation within a vehicle's interior.
- Ensure all wiring is securely routed and does not interfere with vehicle controls (pedals, steering wheel, gear shift, etc.).
- Do not attempt to modify or disassemble the product, as this may void the warranty and pose a safety risk.
- Keep out of reach of small children.
Figure 1: Safety features of the Vont App-Controlled Car Lights, highlighting water resistance, high-temperature resistance, and flame retardant materials.
Setup and Installation
The Vont App-Controlled Car Lights are designed for quick and easy installation in various car models. Follow these steps for proper setup:
- Prepare the Surface: Ensure the surfaces where the strip lights will be placed are clean and dry for optimal adhesion.
- Lay Out the Strip: Unroll the 21-feet single-design LED strip light. Plan the routing of the strip within your car's interior, typically along the dashboard, under seats, and in footwells.
- Secure the Strip: Use the included cable ties or adhesive stickers to secure the strip light in place. Ensure the strip is firmly attached and does not hang loosely or obstruct any moving parts.
- Connect Power: Plug the controller into your car's 12V power outlet (cigarette lighter socket).
- Power On: Turn on the car lights using the controller or the Vont Home App.
Figure 2: Recommended installation layout for the 21-foot LED strip light and controller.
Operating Instructions
The Vont App-Controlled Car Lights can be operated via the included physical controller or the Vont Home App.
Using the Physical Controller
The physical controller provides basic functions:
- Power Button: Turns the lights on or off.
- Mode Button: Cycles through various preset scene modes.
- Brightness Buttons: Adjusts the intensity of the lights.
Using the Vont Home App
For full control and customization, download the Vont Home App on your smartphone. The app allows you to:
- Select from 16 million colors.
- Choose from 30 unique scene modes.
- Create custom DIY lighting effects.
- Adjust brightness levels.
- Activate Music Sync Mode.
Figure 3: Vont Home App interface for controlling car lights.
Music Sync Mode
The Vont Car Lights feature a built-in microphone that allows the lights to synchronize with your car's music in real-time. To activate Music Sync Mode:
- Ensure the lights are powered on.
- Open the Vont Home App on your smartphone.
- Navigate to the Music Mode section within the app.
- Select your desired music synchronization settings. The lights will respond to the beats and rhythm of the music playing in your car.
Figure 4: Music Sync Mode in action, where lights respond to audio.
Maintenance
To ensure the longevity and optimal performance of your Vont App-Controlled Car Lights, follow these maintenance guidelines:
- Cleaning: Gently wipe the LED strip lights with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Connection Check: Periodically check all connections to ensure they are secure and free from corrosion.
- Adhesion: If the adhesive begins to weaken, re-secure the strip with additional cable ties or suitable automotive-grade adhesive tape.
- Storage: If removing the lights for an extended period, store them in a cool, dry place away from direct sunlight.
Troubleshooting
If you encounter issues with your Vont App-Controlled Car Lights, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power connection. | Ensure the controller is securely plugged into the 12V power outlet and the car's ignition is on. Check the car's fuse for the 12V outlet. |
| Lights are dim or flickering. | Low power or loose connection. | Check all connections for tightness. Ensure the car's battery voltage is sufficient. Adjust brightness via the app or controller. |
| App cannot connect to lights. | Bluetooth issue or app malfunction. | Ensure Bluetooth is enabled on your phone. Restart the Vont Home App. Try restarting your phone. Ensure the lights are powered on. |
| Music Sync Mode not working. | Microphone obstruction or app setting. | Ensure the controller's microphone is not obstructed. Check Music Mode settings in the Vont Home App. Increase music volume. |
| Adhesive not holding. | Improper surface preparation or environmental factors. | Clean the surface thoroughly before re-applying. Use additional cable ties or stronger automotive-grade adhesive tape for reinforcement. |
Specifications
- Brand: Vont
- Model Number: CSL01-RBTV1-X1
- Color: Black
- Form Factor: Strip
- Recommended Uses: Vehicle Interior
- Included Components: 21-feet LED strip light and controller
- Special Feature: Waterproof (Water Resistant)
- Item Weight: 8 Ounces
- Material: Polyvinyl Chloride (PVC)
- Remote Control Included?: No (App controlled)
- Number of Pieces: 1
- Automotive Fit Type: Universal Fit
- UPC: 850013449538
- Wattage: 18 watts
- Voltage: 12 Volts (DC)
- Light Source Type: LED
Warranty and Support
Vont offers a lifetime warranty for this product, covering loss, theft, and defects in materials and workmanship for as long as you own your car lights. For any questions, concerns, or support needs, Vont Customer Satisfaction Wizards are available 24/7. Please refer to the Vont official website or your purchase documentation for contact details.
