1. Introduction
This manual provides essential instructions for the installation, operation, and maintenance of the Okin Bluetooth Control Box, Model JLDP.05.046.001. This device is designed as a replacement part for specific electric adjustable beds, enabling Bluetooth connectivity for enhanced control.
Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Always disconnect power to the adjustable bed before installing or replacing any components.
- Ensure the replacement control box model JLDP.05.046.001 is compatible with your existing adjustable bed system. Refer to your bed's original manual or manufacturer for compatibility verification.
- Do not expose the control box to moisture or extreme temperatures.
- Do not attempt to open or repair the control box yourself. Refer all servicing to qualified personnel.
- Keep children and pets away from moving parts of the adjustable bed during operation.
3. Package Contents
Verify that all items are present in the package:
- 1 x Okin Bluetooth Control Box (Model JLDP.05.046.001)
- 1 x RJ9 Plug Connector (integrated with the control box)
Image 3.1: Front view of the Okin Bluetooth Control Box. This image shows the black rectangular control box with the "OKIN" logo prominently displayed on the top surface. Two small, elongated indicator lights are visible to the right of the logo. A black cable with an RJ9 plug connector extends from the top of the box.
4. Setup and Installation
This control box is specifically designed to replace Okin control box model JLDP.05.046.001. Before proceeding, confirm that your existing control box matches this model number.
- Power Disconnection: Unplug your adjustable bed from the main power outlet to prevent electrical hazards.
- Locate Existing Control Box: Identify the current control box on your adjustable bed frame. It is typically located near the motor or under the bed.
- Disconnect Old Control Box: Carefully disconnect all cables connected to the existing control box. Note the position of each cable for re-connection.
- Verify Model Number: Double-check the model number on your existing control box and compare it with JLDP.05.046.001. The new control box is a direct replacement for this specific model.
- Connect New Control Box: Connect the cables from your adjustable bed (motors, power, hand remote) to the corresponding ports on the new Okin Bluetooth Control Box. The RJ9 plug connector from the new control box should connect to the appropriate port on your bed's master control system.
- Secure Control Box: Mount the new control box securely to the bed frame using the integrated mounting tabs, if applicable.
- Power Reconnection: Plug your adjustable bed back into the main power outlet.
Image 4.1: Bottom view of the Okin Bluetooth Control Box. This image displays the underside of the control box, featuring a white label with detailed product information. The label clearly states "OKIN Refined Electric Technology Co., Ltd.", "MODEL: BT40A JLDP.05.046.001", FCC ID, IC, HW:V1.0, and regulatory compliance text.
5. Operating Instructions
5.1 Initial Power-Up
After installation and power reconnection, the control box should power on. Indicator lights on the control box may illuminate, indicating it is ready for operation.
5.2 Bluetooth Pairing and App Usage
This control box enables Bluetooth control of your adjustable bed via a smartphone application.
- Download the App: Search for and download the "Comfort Enhancements by Okin Refined" application from your smartphone's app store (e.g., Apple App Store for iOS, Google Play Store for Android).
- Enable Bluetooth: Ensure Bluetooth is enabled on your smartphone.
- Open the App: Launch the "Comfort Enhancements by Okin Refined" app.
- Pairing: Follow the on-screen instructions within the app to search for and pair with your Okin Bluetooth Control Box. The app should detect the control box automatically.
- Control Functions: Once paired, you can use the app to control the various functions of your adjustable bed, such as head and foot articulation, massage (if supported by your bed), and preset positions.
Note: If you experience difficulty pairing, ensure no other devices are actively connected to the control box via Bluetooth. Restarting the app or your phone may also resolve minor connectivity issues.
6. Maintenance
- Cleaning: Wipe the control box with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Cable Inspection: Periodically check all cables for signs of wear, fraying, or damage. Replace damaged cables immediately.
- Environment: Ensure the control box is kept in a dry environment, away from direct sunlight and heat sources.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Control box does not power on. | No power to the bed; incorrect connection. | Ensure the bed is plugged into a working outlet. Check all cable connections to the control box and bed motor. |
| Cannot pair with the app. | Bluetooth not enabled; incorrect app; interference; control box not discoverable. |
|
| Bed functions not responding via app. | App not fully connected; bed motor issue; incorrect control box model. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | JLDP.05.046.001 |
| Compatibility | Direct replacement for Okin JLDP.05.046.001 control boxes |
| Connectivity | Bluetooth |
| Connector Type | RJ9 plug |
| Color | Black |
| Cable Length | Approximately 329mm (13 inches) |
| Dimensions | Approximately 2 x 2 x 2 inches (5.08 x 5.08 x 5.08 cm) |
| Item Weight | Approximately 2.39 ounces (67.7 grams) |
9. Warranty and Support
For specific warranty information regarding your Okin Bluetooth Control Box, please refer to the purchase documentation or contact the seller directly. Warranty terms may vary depending on the retailer and region.
For technical support or further assistance, please visit the official Okin Store on Amazon or contact Okin customer service through their official channels.
