1. Introduction
Thank you for choosing the Woowind AP2-P Portable Tire Inflator. This device is designed to provide convenient and efficient inflation for various items, including car tires, bicycle tires, and sports balls. Its compact design, powerful performance, and intelligent features like auto shut-off make it a reliable tool for maintaining optimal pressure.
Please read this manual thoroughly before first use to ensure proper operation and to maximize the lifespan of your device.
2. Safety Information
- Keep out of reach of children.
- Do not operate the inflator near flammable liquids or gases.
- Avoid prolonged continuous operation. Allow the device to cool down after 10-15 minutes of continuous use to prevent overheating.
- Do not expose the device to rain or moisture.
- Always check the recommended pressure for the item you are inflating to avoid over-inflation, which can cause damage or injury.
- Do not leave the inflator unattended while in operation.
- Store the device in a cool, dry place when not in use.
- Use only the provided charging cable and accessories.
- If the device shows signs of damage, do not use it. Contact customer support.
3. Package Contents
Verify that all items are present in your package:
- Woowind AP2-P Portable Tire Inflator ×1
- Flexible Air Hose ×1
- Valve Adapters (Presta, Schrader, Dunlop compatible) ×1
- Swimming Ring Nozzle ×1
- Ball Needle ×1
- Storage Bag ×1
- USB Charging Cable ×1
- User Manual ×1
Image: All components included in the Woowind AP2-P package, neatly arranged.
4. Product Overview
The Woowind AP2-P features a compact design with an intuitive digital display and control buttons. It includes various accessories for different inflation needs.
Image: The Woowind AP2-P inflator and its complete set of accessories, demonstrating its versatility for various inflation tasks.
Key Components:
- Digital Display: Shows current pressure, target pressure, battery level, and selected mode.
- Power Button: Turns the device on/off.
- Mode Button (M): Cycles through preset inflation modes (Car, Motorcycle, Bicycle, Ball, Custom).
- Set Button (SET): Confirms selections and switches between pressure units (PSI, BAR, KPA, KG/CM²).
- +/- Buttons: Adjust target pressure values.
- Air Hose Connection Port: Where the flexible air hose attaches.
- USB-C Charging Port: For charging the inflator.
- USB-A Output Port: For using the inflator as a power bank.
- LED Light: Provides illumination in low-light conditions.
5. Setup
5.1. Charging the Inflator
- Connect the provided USB charging cable to the USB-C charging port on the inflator.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port.
- The digital display will indicate the charging status. Ensure the device is fully charged before first use for optimal battery life.
Image: The Woowind AP2-P inflator being charged and simultaneously used as a power bank to charge other devices.
5.2. Attaching the Air Hose and Adapters
- Screw the flexible air hose securely onto the air hose connection port at the top of the inflator.
- Select the appropriate valve adapter for the item you wish to inflate (e.g., Presta adapter for certain bike valves, ball needle for sports balls, swimming ring nozzle for inflatables).
- Screw the selected adapter onto the free end of the flexible air hose.
6. Operating Instructions
6.1. Powering On/Off
- Press and hold the Power button for 2-3 seconds to turn the inflator on.
- Press and hold the Power button again for 2-3 seconds to turn the inflator off.
- The device will automatically turn off after a period of inactivity.
6.2. Selecting Pressure Units
- With the device powered on, press the SET button repeatedly to cycle through available pressure units: PSI, BAR, KPA, KG/CM².
- Select the unit appropriate for your inflation needs.
6.3. Selecting Inflation Mode and Setting Target Pressure
- Press the Mode (M) button to cycle through the preset inflation modes: Car, Motorcycle, Bicycle, Ball, and Custom. Each mode has a default pressure range.
- Once a mode is selected, the target pressure value will flash on the display.
- Use the + and - buttons to adjust the target pressure to your desired value. Refer to the item's manufacturer recommendations for correct pressure.
- After setting the target pressure, wait a few seconds for the value to stop flashing, or press the SET button to confirm.
Image: A user operating the Woowind AP2-P inflator, connected to a car tire, with the digital display clearly visible.
6.4. Starting and Stopping Inflation
- Connect the air hose with the appropriate adapter to the valve of the item you wish to inflate. The display will show the current pressure.
- Ensure the target pressure is set correctly.
- Press the Power button briefly to start inflation.
- The inflator will automatically stop once the target pressure is reached (Auto Shut-off feature).
- To manually stop inflation at any time, press the Power button again.
- Carefully disconnect the air hose from the valve.
Image: A user demonstrating the use of the Woowind AP2-P inflator to check and inflate a car tire.
6.5. Using the LED Light
- With the device powered on, briefly press the Power button twice to turn the LED light on.
- Briefly press the Power button twice again to turn the LED light off.
6.6. Using as a Power Bank
- Connect your electronic device (e.g., smartphone, tablet) to the USB-A output port on the inflator using your device's charging cable.
- The inflator will begin charging your device.
7. Maintenance
7.1. Cleaning
- Ensure the device is turned off and disconnected from any power source before cleaning.
- Wipe the exterior of the inflator with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Do not immerse the device in water or any other liquid.
7.2. Storage
- Store the inflator and its accessories in the provided storage bag.
- Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- For prolonged storage, charge the device fully every 3-6 months to maintain battery health.
Image: The compact Woowind AP2-P inflator being stored in a car's glove compartment.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery. | Charge the device fully. |
| Device does not turn on. | Power button not pressed correctly. | Press and hold the Power button for 2-3 seconds. |
| Inflator runs but no air comes out or pressure doesn't increase. | Air hose or adapter not securely connected. | Ensure all connections are tight. |
| Inflator runs but no air comes out or pressure doesn't increase. | Air hose or valve is blocked. | Check for obstructions in the hose or valve. |
| Inaccurate pressure reading. | Incorrect pressure unit selected. | Press the SET button to cycle to the correct unit. |
| Inaccurate pressure reading. | Device needs calibration (less common). | If issues persist, contact customer support. |
| Device overheats and shuts down. | Prolonged continuous use. | Allow the device to cool down for at least 15-20 minutes before resuming use. |
9. Specifications
| Feature | Detail |
|---|---|
| Model | AP2-P |
| Brand | Woowind |
| Material | Acrylonitrile Butadiene Styrene |
| Dimensions (L x W x H) | 2.44" x 6.05" x 1.61" |
| Weight | 446 Grams (15.7 ounces) |
| Power Source | Battery Powered (2x2000mAh Lithium Metal batteries) |
| Maximum Pressure | 150 PSI |
| Air Flow Capacity | 38 Liters Per Minute |
| Operation Mode | Automatic (with auto shut-off) |
| UPC | 791265784391 |
10. Warranty & Support
The Woowind AP2-P Portable Tire Inflator comes with a 24-month warranty from the date of purchase, covering manufacturing defects and material flaws.
For warranty claims, technical support, or any questions regarding your product, please contact Woowind customer service through the retailer where you purchased the product or visit the official Woowind website for contact information.
Please retain your proof of purchase for warranty validation.
