1. Introduction
Thank you for choosing the Total TSLI1651 20V 165mm Cordless Circular Saw. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before first use and keep it for future reference.
2. General Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools. Failure to follow these instructions may result in serious injury.
2.1 Work Area Safety
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2.2 Electrical Safety
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
2.3 Personal Safety
- Always wear eye protection. Use safety glasses, goggles, or a face shield.
- Wear appropriate personal protective equipment (PPE) such as dust masks, non-skid safety shoes, hard hats, or hearing protection for appropriate conditions.
- Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
3. Product Overview
The Total TSLI1651 is a powerful 20V cordless circular saw designed for efficient cutting of various materials, including wood and metal. It features a compact design and a comfortable bi-material handle.
Figure 3.1: Overview of the Total TSLI1651 Cordless Circular Saw, showing the main body and the installed 165mm blade.
Figure 3.2: Side view of the circular saw, highlighting the blade guard mechanism and the battery insertion slot. Note that the battery is not included with the saw.
4. Setup
4.1 Package Contents
- 1 x Total TSLI1651 20V 165mm Cordless Circular Saw
- 1 x 165mm Cutting Disc
- Instruction Manual
Note: Battery and charger are sold separately and are not included with this product.
Figure 4.1: The circular saw shown with the included 165mm cutting disc. A reminder that the battery and charger are not part of this package.
4.2 Battery Installation
- Ensure the circular saw is switched off and the blade is stationary.
- Align the 20V P20S battery (sold separately) with the battery slot on the tool.
- Slide the battery into the slot until it clicks securely into place.
- To remove, press the battery release button and slide the battery out.
4.3 Blade Installation
- Safety First: Disconnect the battery before attempting to install or change the blade.
- Locate the spindle lock button and press it to secure the spindle.
- Using the provided wrench, loosen the blade retaining bolt by turning it counter-clockwise.
- Remove the outer flange and the old blade (if applicable).
- Clean any dust or debris from the blade flanges.
- Place the new 165mm cutting disc onto the spindle, ensuring the teeth are pointing in the direction of rotation indicated by the arrow on the saw.
- Replace the outer flange and tighten the blade retaining bolt clockwise with the wrench while holding the spindle lock button. Ensure the blade is securely fastened.
5. Operating Instructions
5.1 Basic Operation
- Ensure the battery is fully charged and correctly installed.
- Adjust the cutting depth and bevel angle as required for your material.
- Place the saw base plate firmly on the workpiece, ensuring the blade is clear of the material before starting.
- Press the safety lock-off button (if present) and then squeeze the trigger to start the saw. Allow the blade to reach full speed before beginning the cut.
- Guide the saw smoothly and steadily through the material. Do not force the saw.
- Once the cut is complete, release the trigger and allow the blade to stop completely before lifting the saw from the workpiece.
Figure 5.1: A user demonstrating the proper grip and positioning of the circular saw for cutting a wooden plank.
5.2 Adjusting Cutting Depth
The cutting depth can be adjusted to match the thickness of your material. Loosen the depth adjustment lever, move the base plate up or down to the desired depth, and then securely tighten the lever. For optimal performance and safety, set the blade depth so that the blade extends approximately 3-6mm below the workpiece.
5.3 Adjusting Bevel Angle
The saw allows for bevel cuts at various angles. Loosen the bevel adjustment knob, tilt the saw base plate to the desired angle (e.g., 45 degrees or 90 degrees), and then securely tighten the knob. The saw offers a cutting capacity of 38mm at 45 degrees and 55mm at 90 degrees.
Figure 5.2: The circular saw in action, demonstrating its capability to make precise cuts in wood, with visible depth and angle adjustment mechanisms.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your circular saw.
6.1 Cleaning
- Always disconnect the battery before cleaning.
- Use a soft brush or compressed air to remove dust and debris from the ventilation openings and around the blade guard.
- Do not use water or chemical cleaners, as these can damage the tool.
6.2 Blade Care
- Inspect the blade regularly for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
- Ensure the blade is clean and free of resin buildup, which can affect cutting performance.
6.3 Storage
- Store the tool in a dry, secure place out of reach of children.
- Remove the battery from the tool before storing for extended periods.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not start | Battery not charged or improperly installed. | Charge battery fully. Reinstall battery securely. |
| Blade not cutting efficiently | Dull or damaged blade. Incorrect blade for material. | Replace blade. Ensure correct blade type is used. |
| Excessive vibration | Loose blade. Damaged blade. | Tighten blade retaining bolt. Replace damaged blade. |
| Motor overheating | Overloading the tool. Blocked ventilation. | Reduce cutting pressure. Clear ventilation slots. Allow tool to cool. |
8. Specifications
| Feature | Value |
|---|---|
| Manufacturer | Total |
| Part Number | TSLI1651 |
| Item Weight | 2.81 Kilograms |
| Product Dimensions | 10 x 20 x 37 cm |
| Item Model Number | TSLI1651 |
| Style | Circular Saw |
| Power Source Type | Battery Powered |
| Voltage | 20 Volts |
| Number of Item Subunits | 1 |
| Handle Material | Fiber (Composite) |
| Blade Length | 165 millimeters |
| Speed (No-load) | 5000 RPM |
| Compliant Standards | CE |
| Special Features | Depth Adjustment |
| Included Components | 1 x 165mm Cutting Disc (Battery and charger sold separately) |
| Batteries Included? | No |
| Batteries Required? | Yes |
| Blade Material | High-Speed Steel |
| Surface Recommendation | Wood, Metal |
| ASIN | B09L76GZHV |
| First Available | November 7, 2021 |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact Total customer service. Keep your purchase receipt as proof of purchase.
If you have any questions regarding product measurements, weight, or performance, please contact the seller through the platform's internal messaging service.
