Keter SanRemo 4-Person Resin Garden Lounge Set Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, safe operation, and proper maintenance of your Keter SanRemo 4-Person Resin Garden Lounge Set. Please read all instructions carefully before assembly and use to ensure optimal performance and longevity of your product.

2. Safety Information

Always follow these safety guidelines to prevent injury or damage to the product:

• Ensure all components are correctly assembled and securely fastened before use.
• Do not exceed the recommended weight capacity for each seating unit.
• Place the furniture on a flat, stable surface to prevent tipping.
• Keep children away from the assembly area and small parts during assembly.
• Avoid placing hot items directly on the table surface without protection.

3. Package Contents

Verify that all parts are present before beginning assembly. The package should contain:

• 1 x Two-seater bench (unassembled)
• 2 x Armchairs (unassembled)
• 1 x Coffee table (unassembled)
• Cushions for all seating units
• Assembly hardware (screws, caps, etc.)
• Instruction manual

4. Setup (Assembly Instructions)

This Keter SanRemo lounge set requires self-assembly. Follow the steps below carefully.

4.1 Unpacking and Part Identification

1. Carefully unpack all components from the packaging.
2. Lay out all parts on a clean, soft surface to prevent scratches.
3. Identify each part by comparing it with the component list and diagrams provided in the separate assembly guide (if included).

4.2 General Assembly Steps

While specific steps vary for each furniture piece, the general process involves:

1. Connecting Panels: Attach side panels to back panels, and then to seat bases using the provided hardware. Ensure the correct orientation of each piece.
2. Securing Connections: Use screws and other fasteners to firmly secure all connections. Do not overtighten, but ensure a snug fit.
3. Attaching Legs: Secure the legs to the base of each furniture piece. Ensure they are stable and level.
4. Final Check: Once assembled, gently shake each piece to confirm stability. Re-tighten any loose connections if necessary.

5. Operating Instructions

The Keter SanRemo lounge set is designed for comfortable outdoor seating and relaxation.

• Seating: Place the provided cushions on the bench and armchairs for enhanced comfort. The ergonomic backrests are designed to support a relaxed posture.
• Coffee Table: Use the coffee table as a convenient surface for beverages, books, or small decorative items. Avoid placing excessively heavy objects on the table.
• Placement: Position the lounge set in your desired outdoor area, ensuring it is on a level surface.

6. Maintenance

Proper care will extend the life and appearance of your garden lounge set.

6.1 Cleaning

• Resin Furniture: Clean the resin surfaces with a soft cloth, mild soap, and lukewarm water. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots. Avoid using abrasive cleaners, harsh chemicals, or stiff brushes, as these can damage the resin.
• Cushions: The cushions are designed for outdoor use but should be stored indoors during heavy rain or prolonged periods of non-use to prevent mildew and fading. Spot clean with a mild soap solution and allow to air dry completely. Do not machine wash or tumble dry unless specified on the cushion care label.

6.2 Storage

• During winter months or extended periods of non-use, it is recommended to store the furniture in a dry, sheltered area.
• If outdoor storage is necessary, use a breathable, waterproof furniture cover to protect against elements.

7. Troubleshooting

Refer to this section for solutions to common issues.

• Unstable Furniture: If any piece of furniture feels wobbly or unstable, re-check all assembly connections. Ensure all screws and fasteners are tightened securely. Make sure the furniture is placed on a level surface.
• Stains on Resin: For stubborn stains, use a soft brush with a diluted mild detergent solution. Gently scrub the affected area, then rinse thoroughly and dry.
• Fading Color: While the resin is designed for outdoor use, prolonged exposure to direct sunlight can cause some fading over time. Using a furniture cover when not in use can help preserve the color.

8. Specifications

9. Warranty Information

Keter products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Keter website. Keep your proof of purchase for any warranty claims.

10. Customer Support

If you have any questions regarding the assembly, operation, or maintenance of your Keter SanRemo lounge set, or if you require replacement parts, please contact Keter customer service. Contact details can typically be found on the Keter website or on the product packaging.