1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your SENSEA LOOKA LED Bathroom Mirror. The mirror features integrated LED lighting, touch controls for brightness and color temperature adjustment, an anti-fog function, and a magnifying mirror. Its design allows for both horizontal and vertical mounting, adapting to various bathroom layouts. Please read this manual thoroughly before installation and use, and retain it for future reference.
Figure 1: SENSEA LOOKA LED Bathroom Mirror in a modern bathroom setting.
2. Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the main power supply is disconnected before any installation or maintenance work.
- Water and Moisture: This mirror is rated IP44, indicating protection against splashing water. However, avoid direct water jets or submersion. Do not install in areas where it may be directly exposed to water.
- Handling: Mirrors are fragile. Handle with care to prevent breakage. Do not apply excessive force or impact.
- Cleaning: Use only soft, damp cloths and mild, non-abrasive cleaners. Avoid harsh chemicals that may damage the mirror surface or electrical components.
- Children: Keep packaging materials out of reach of children. This product is not a toy.
3. Package Contents
Carefully unpack the mirror and check for any damage. Ensure all components are present before proceeding with installation.
- SENSEA LOOKA LED Bathroom Mirror
- Mounting hardware (screws, wall plugs)
- Instruction Manual
Figure 2: Illustration of the mirror packaging and typical included components.
4. Setup and Installation
The SENSEA LOOKA mirror is designed for wall mounting and can be installed either horizontally or vertically. Professional installation is highly recommended due to electrical connections.
4.1. Pre-Installation
- Choose Location: Select a suitable wall location in your bathroom, considering electrical access and desired mirror orientation (horizontal or vertical).
- Measure and Mark: Use the provided dimensions (Figure 3) to accurately mark the drilling points on the wall. Ensure the marked points are level.
- Power Disconnection: Crucially, turn off the main power supply to the circuit where the mirror will be installed at your home's circuit breaker. Verify with a voltage tester.
4.2. Mounting the Mirror
- Drill holes at the marked points using an appropriate drill bit for your wall type.
- Insert the wall plugs into the drilled holes.
- Secure the mounting brackets (if separate) or screws into the wall plugs, leaving enough protrusion for the mirror to hang securely.
- Connect the mirror's electrical wiring to your home's electrical supply, ensuring correct polarity (Live, Neutral, Earth). This step must be performed by a qualified electrician.
- Carefully lift the mirror and hang it onto the secured mounting hardware. Ensure it is stable and level.
Figure 3: Dimensional drawing of the SENSEA LOOKA LED Bathroom Mirror (120 cm x 70 cm).
5. Operating Instructions
The SENSEA LOOKA mirror features intuitive touch controls located on the mirror surface for easy operation of its functions.
Figure 4: Touch control interface for the mirror's functions.
5.1. Power On/Off and Brightness Adjustment
- Power: Touch the Power icon () to turn the LED lighting on or off.
- Brightness: When the light is on, press and hold the Brightness icon () to cycle through different light intensity levels. Release when the desired brightness is reached.
5.2. Color Temperature Adjustment
- Color Temperature: Touch the Color Temperature icon () to switch between different color temperatures (e.g., 3000K warm white, 4000K neutral white, 5000K cool white).
5.3. Anti-Fog Function
- The mirror is equipped with an anti-fog function. This function is typically activated by a dedicated touch button or automatically with the main light. Refer to the specific icon for the anti-fog function on your mirror.
5.4. Magnifying Mirror
- The integrated magnifying mirror provides a 3x magnification, ideal for detailed tasks such as makeup application or shaving.
6. Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your SENSEA LOOKA mirror.
- Cleaning the Mirror Surface: Use a soft, lint-free cloth dampened with water or a non-abrasive glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into electrical components. Wipe gently to avoid scratches.
- Cleaning the Frame: If your mirror has a frame, wipe it with a soft, damp cloth. Avoid harsh chemicals.
- Do Not Disassemble: Do not attempt to disassemble or repair the mirror yourself. This can void the warranty and pose electrical hazards.
- Power Off Before Cleaning: Always ensure the mirror is turned off and disconnected from the power supply before cleaning.
7. Troubleshooting
If you encounter issues with your mirror, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED light does not turn on. | No power supply, loose connection, faulty LED driver. | Check circuit breaker. Ensure all electrical connections are secure (consult an electrician). Contact customer support if the issue persists. |
| Anti-fog function not working. | Anti-fog function not activated, faulty heating element. | Ensure the anti-fog function is activated via its touch control. If not, contact customer support. |
| Touch controls are unresponsive. | Mirror surface is wet or dirty, temporary electronic glitch. | Clean and dry the mirror surface. Disconnect power for 1 minute and then reconnect to reset. |
If these solutions do not resolve the issue, please contact SENSEA customer support or a qualified technician.
8. Specifications
Figure 5: Key features of the SENSEA LOOKA LED Bathroom Mirror.
| Feature | Detail |
|---|---|
| Brand | SENSEA |
| Model Number | part_B09L4YT2PB |
| Dimensions (L x W x H) | 120 cm x 70 cm x 0.03 cm (Mirror thickness) |
| Weight | 13.96 kg |
| Material | Glass |
| Power Consumption | 60W (Max) |
| Ingress Protection (IP) Rating | IP44 (Protected against solid objects over 1mm and splashing water from any direction) |
| Light Color Temperatures | 3000K (Warm White), 4000K (Neutral White), 5000K (Cool White) |
| Special Features | LED Illumination, Touch Sensor Controls, Anti-Fog Function, 3x Magnifying Mirror |
| Mounting Type | Wall Mount (Horizontal or Vertical) |
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you require technical assistance, have questions about installation, or need to report a defect, please contact SENSEA customer support through their official channels or the seller from whom you purchased the product. Please have your model number (LOOKA part_B09L4YT2PB) and purchase date available when contacting support.
