SENSEA LOOKA B09L4WSX4C

Download PDF
Contents

SENSEA LOOKA LED Bathroom Mirror User Manual

Model: LOOKA B09L4WSX4C

1. Introduction

Thank you for choosing the SENSEA LOOKA LED Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read this manual thoroughly before installation and keep it for future reference.

SENSEA LOOKA LED Bathroom Mirror installed above two sinks

Figure 1: SENSEA LOOKA LED Bathroom Mirror in a modern bathroom setting.

2. Safety Information

WARNING: Electrical installation should only be performed by a qualified electrician. Always disconnect power at the main circuit breaker before installation or maintenance.

  • Ensure the power supply matches the mirror's requirements (220-240V, 50/60Hz).
  • This mirror is rated IP44, meaning it is protected against solid objects over 1mm and splashing water from any direction. It is suitable for bathroom use, but avoid direct water jets.
  • Do not attempt to modify or repair the mirror yourself. Contact qualified personnel for service.
  • Keep packaging materials away from children.
  • Handle the mirror with care to prevent damage to the glass or electrical components.

3. Product Features

  • Integrated LED lighting with adjustable color temperature (3000K, 4000K, 5000K).
  • Touch-sensitive controls for power, brightness, and color temperature.
  • Anti-fog function for clear visibility after showers.
  • 3x Magnification mirror for detailed tasks.
  • Can be mounted horizontally or vertically.
  • IP44 rated for bathroom environments.
Icons representing LED lighting, 5x magnification, anti-fog, IP44 rating, horizontal/vertical mounting, and 52W power

Figure 2: Key features of the SENSEA LOOKA mirror, including LED, anti-fog, IP44, and power rating.

Close-up of the touch controls on the mirror, showing power, light temperature, and brightness icons

Figure 3: Detailed view of the touch control panel and adjustable light temperatures (3000K, 4000K, 5000K).

4. Specifications

AttributeValue
BrandSENSEA
ModelLOOKA B09L4WSX4C
Dimensions (W x H x D)81.5 cm x 70 cm x 70 cm (approx. 32.1 x 27.6 x 27.6 inches)
Weight10.96 kg (approx. 24.16 lbs)
MaterialGlass
Power Consumption52 W (Max)
Ingress Protection (IP) RatingIP44
Light Color Temperature3000K (Warm), 4000K (Neutral), 5000K (Cool)
Mounting TypeWall Mount
Special FeaturesLED Lighting, Anti-fog, Touch Control, 3x Magnification
Technical drawing showing the dimensions of the SENSEA LOOKA mirror

Figure 4: Detailed dimensions of the SENSEA LOOKA mirror (90cm width, 70cm height).

5. Setup and Installation

Before beginning installation, ensure you have the necessary tools (drill, screwdriver, level, measuring tape) and that the wall is suitable for mounting the mirror's weight.

5.1 Mounting the Mirror

  1. Determine the desired mounting position (horizontal or vertical) and height.
  2. Mark the drilling points on the wall using a pencil and a level, referring to the mirror's mounting brackets.
  3. Drill holes at the marked points and insert appropriate wall plugs (not supplied, choose based on wall material).
  4. Secure the mounting screws into the wall plugs, leaving a small gap for the mirror's brackets to hook onto.
  5. Carefully lift the mirror and hang it onto the secured screws. Ensure it is stable and level.

5.2 Electrical Connection

IMPORTANT: Ensure the main power supply to the circuit is OFF before making any electrical connections.

  1. Locate the electrical connection box on the back of the mirror.
  2. Connect the household electrical wires to the mirror's terminal block:
    • Brown wire (Live) to 'L' terminal.
    • Blue wire (Neutral) to 'N' terminal.
    • Green/Yellow wire (Earth) to the Earth terminal (if applicable).
  3. Ensure all connections are secure and properly insulated.
  4. Close the connection box cover.
  5. Restore power at the main circuit breaker.
Diagram showing the electrical wiring connection for the mirror

Figure 5: Electrical wiring diagram for connecting the mirror to the main power supply.

6. Operating Instructions

The SENSEA LOOKA mirror features intuitive touch controls located on the mirror surface.

  • Power On/Off: Touch the power icon (⏻) to turn the mirror's light on or off.
  • Adjust Brightness: With the light on, touch and hold the brightness icon (☀) to cycle through brightness levels. Release when the desired brightness is reached.
  • Change Color Temperature: Touch the color temperature icon (⚙) to switch between 3000K (warm white), 4000K (neutral white), and 5000K (cool white).
  • Anti-fog Function: The anti-fog function is typically activated automatically when the mirror is powered on, or it may have a dedicated icon (refer to specific model markings if present). It heats a portion of the mirror to prevent condensation.
  • Magnifying Mirror: The integrated 3x magnifying mirror provides a magnified view for detailed tasks like makeup application or shaving.

7. Maintenance

Regular cleaning and proper care will ensure the longevity and optimal performance of your mirror.

  • Cleaning the Mirror: Use a soft, damp cloth and a mild glass cleaner. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the mirror surface or frame.
  • Cleaning the Frame: Wipe the frame with a soft, dry or slightly damp cloth.
  • Electrical Components: Ensure the mirror is disconnected from power before cleaning any electrical components. Do not spray water directly onto the mirror's electrical parts.
  • Bulb Replacement: The LED lighting is integrated and designed for long life. Do not attempt to replace individual LEDs. If the lighting fails, contact customer support.

8. Troubleshooting

If you encounter issues with your mirror, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Mirror light does not turn on.No power supply; loose wiring; faulty switch.Check circuit breaker. Ensure all electrical connections are secure. Contact a qualified electrician if unsure.
Light flickers or is dim.Unstable power supply; internal component issue.Check power supply stability. If problem persists, contact customer support.
Anti-fog function not working.Function not activated; internal heater issue.Ensure mirror is powered on. If it has a dedicated anti-fog button, activate it. Contact customer support if issue persists.
Touch controls are unresponsive.Mirror surface is wet or dirty; electrical interference; internal sensor issue.Ensure mirror surface is clean and dry. Try turning power off and on at the circuit breaker to reset.

If the problem persists after attempting these solutions, please contact SENSEA customer support.

9. Warranty and Support

SENSEA products are designed for durability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the SENSEA customer service department. Contact information can typically be found on the product packaging or the official SENSEA website.

© 2024 SENSEA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.