1. Introduction
This manual provides instructions for the PGYTECH Waterproof Safety Carrying Case, designed to protect and transport your DJI Mavic 3 or Mavic 3 Classic drone and its accessories. This case offers robust protection against water, impacts, and temperature fluctuations, ensuring the safety of your equipment during travel and storage.
Image 1.1: Exterior view of the PGYTECH Waterproof Safety Carrying Case.
2. Product Overview and Components
The PGYTECH Safety Carrying Case is engineered with custom-fit compartments to securely hold your DJI Mavic 3 or Mavic 3 Classic drone and essential accessories. The internal layout is designed for efficient organization and maximum protection.
Image 2.1: Internal layout of the case with designated slots for drone, controller, and accessories.
The case can accommodate the following items:
- DJI Mavic 3 / Mavic 3 Classic drone
- Remote controller (standard or DJI Smart Controller)
- Up to 5 intelligent flight batteries
- Power adapter and power cable
- Battery charging hub
- Battery-to-power bank adapter
- Filters
- One pair of spare propellers
- Additional custom storage areas for small accessories
3. Key Features
3.1. IP67 Waterproof Protection
The case is constructed from high-impact engineering plastic, injection-molded in one piece. When fully closed and latched, it provides IP67 waterproof protection, allowing it to be submerged in water up to 1 meter without water ingress.
Image 3.1: The case exterior with water droplets, illustrating its waterproof design.
3.2. Durable Construction and Temperature Resistance
Made from engineered plastic, the case is resistant to drops, pressure, impact, and corrosion. It is designed to operate within a normal temperature range of -20°C to +60°C and can withstand temperatures from -40°C to +80°C for short durations.
Image 3.2: Side view of the case, showcasing its durable engineered plastic construction.
3.3. EVA Shockproof Lining
The interior features a high-quality EVA shockproof lining. This precision-cut lining ensures a snug fit for all equipment, providing protection against impacts and vibrations.
Image 3.3: Close-up of the internal EVA foam lining, designed for shock absorption.
3.4. Automatic Pressure Balance Valve
An integrated automatic pressure balance valve prevents unwanted vacuum sealing or bursting caused by air pressure differences due to changes in altitude or temperature. This ensures the case can be opened safely and easily in varying environments.
Image 3.4: Detail of the automatic pressure balance valve.
3.5. Reinforced, Anti-Theft Latches
The case features reinforced latches that lock securely while remaining easy to open. Dual stainless steel padlock holes are provided for enhanced security against theft and tampering.
Image 3.5: A hand demonstrating the operation of a reinforced latch.
3.6. Ergonomic Handle
The case is equipped with a comfortable, non-slip, and wear-resistant handle, designed for easy and secure carrying.
Image 3.6: A hand gripping the ergonomic handle for transport.
4. Setup and Usage
4.1. Opening the Case
- Place the case on a flat, stable surface.
- Locate the two latches on the front of the case.
- Press the red release button on each latch and lift the latch upwards to disengage.
- Gently lift the lid of the case.
4.2. Placing Equipment
- Carefully place your DJI Mavic 3 or Mavic 3 Classic drone into its designated compartment. Ensure it sits snugly within the EVA foam.
- Insert the remote controller into its dedicated slot.
- Organize batteries, charging hub, cables, and other accessories into their respective custom-fit compartments.
- Ensure all items are securely seated and do not protrude above the foam lining to allow for proper closure.
4.3. Closing the Case
- Lower the lid of the case, ensuring it aligns correctly with the base.
- Press down firmly on the lid until it is fully closed.
- Engage both latches by pushing them downwards until they click securely into place. Verify that the red release buttons are no longer visible.
Image 4.1: The case being carried, demonstrating its portability.
5. Maintenance
5.1. Cleaning
- Wipe the exterior of the case with a damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive cleaners.
- For the interior EVA foam, use a soft, dry brush or a vacuum cleaner with a brush attachment to remove dust and debris.
- Ensure the case is completely dry before closing or storing equipment.
5.2. Storage
- Store the case in a cool, dry place away from direct sunlight when not in use.
- Periodically check the latches and hinges for any signs of wear or damage.
6. Troubleshooting
6.1. Difficulty Opening the Case
- If the case is difficult to open, it may be due to a pressure differential. The automatic pressure balance valve should mitigate this, but if resistance is felt, allow a few moments for pressure to equalize before attempting to open again.
- Ensure the latches are fully disengaged by pressing the red release buttons and lifting them completely.
6.2. Latches Not Securing
- Verify that the lid is properly aligned and fully closed. No items inside should be preventing the lid from seating correctly.
- Ensure no debris is obstructing the latch mechanism. Clean if necessary.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | P-26A-006 |
| Compatibility | DJI Mavic 3 / Mavic 3 Classic |
| Material | PP, EVA |
| Waterproof Rating | IP67 |
| Operating Temperature | -20°C to +60°C |
| Dimensions (L x W x H) | 410mm x 330mm x 165mm (16.18 x 14.96 x 6.57 inches) |
| Item Weight | 2.69 kg (5.92 pounds) |
8. Warranty and Support
For warranty information or technical support, please refer to the official PGYTECH website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.