1. Product Overview
The Shadowhawk S9322 is a high-performance, rechargeable LED tactical flashlight designed for various applications including camping, hiking, emergency situations, and general household use. It features an advanced XHP70.2 LED chip, offering exceptional brightness and a long beam distance. Constructed from durable aviation aluminum alloy, it is built to withstand harsh conditions.
Image: The Shadowhawk S9322 LED Super Bright Torch, showcasing its design and included accessories like the USB-C cable and rechargeable battery.
2. Package Contents
Please verify that all items are present in your package:
- 1 x Shadowhawk S9322 USB Torch
- 1 x Shadowhawk Rechargeable Battery
- 1 x USB-C Cable
- 1 x Lanyard
- 1 x Operating Instructions (this manual)
Image: A visual representation of the Shadowhawk S9322 torch and its accompanying accessories, including the battery, USB-C cable, and lanyard.
3. Setup
3.1 Battery Installation
The Shadowhawk S9322 uses a rechargeable Lithium Ion battery. Before first use, or after extended storage, ensure the battery is fully charged.
- Unscrew the rear cover of the torch by turning it counter-clockwise.
- Remove the transparent plastic protective film from the surface of the rechargeable battery. This film must be removed for the battery to function and charge.
- Insert the battery into the torch with the positive (+) end facing towards the head of the torch.
- Screw the rear cover back on clockwise until it is securely tightened.
Image: Step-by-step guide illustrating how to open the torch, insert the battery with correct polarity, and close the torch.
3.2 Initial Charging
It is recommended to fully charge the battery before the first use to ensure optimal performance and battery longevity.
- Connect the provided USB-C cable to the torch's charging port.
- Connect the other end of the USB-C cable to a USB power source (e.g., wall adapter, computer USB port, power bank).
- The indicator light on the switch will turn red during charging and green when fully charged.
Image: The torch connected via USB-C for charging, demonstrating its capability to also function as a power bank for other devices.
4. Operating Instructions
4.1 Power On/Off
To prevent accidental activation and battery drain, the torch features an improved switch design:
- To Turn On: Press and hold the power switch for 3 seconds. The torch will activate in High mode.
- To Turn Off: Press and hold the power switch for 3 seconds again, or cycle through all modes until the torch turns off automatically.
Image: Illustration of the 5 light modes (High, Medium, Low, Strobe, SOS) and the instruction to press and hold the switch for 3 seconds to turn on.
4.2 Light Modes
The torch offers 5 distinct light modes:
- High: Maximum brightness for powerful illumination.
- Medium: Balanced brightness for general use.
- Low: Reduced brightness for extended battery life or close-range tasks.
- Strobe: Flashing light for signaling or disorienting.
- SOS: International Morse code signal for emergencies.
To cycle through the modes, short press the power switch once the torch is on. The sequence is High > Medium > Low > Strobe > SOS.
4.3 Adjustable Focus (Zoomable)
The Shadowhawk S9322 features a zoomable design, allowing you to adjust the beam from a wide floodlight to a focused spotlight.
- To Adjust: Gently slide the head of the torch forward or backward.
- Floodlight: Pull the head back for a wide, diffused beam, ideal for illuminating large areas.
- Spotlight: Push the head forward for a narrow, concentrated beam, suitable for long-distance viewing.
Image: Comparison of the wide floodlight beam and the narrow spotlight beam, demonstrating the torch's adjustable focus feature.
4.4 Power Bank Function
The torch can also serve as a portable power bank to charge other USB-powered devices in an emergency.
- Connect your device's charging cable to the USB-A output port on the torch.
- The torch will begin charging your device.
5. Maintenance
5.1 Cleaning
- Wipe the torch body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Keep the lens clean for optimal light output. Use a lens cleaning cloth if necessary.
5.2 Battery Care
- Recharge the battery when the indicator light turns red to prevent deep discharge.
- If storing the torch for an extended period, charge the battery to approximately 50% and recharge every 3-6 months to maintain battery health.
- Avoid exposing the battery to extreme temperatures.
5.3 Storage
- Store the torch in a cool, dry place away from direct sunlight.
- Ensure the torch is turned off to prevent accidental activation and battery drain.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Torch does not turn on. | Battery is low or depleted. | Charge the battery fully. |
| Battery not inserted correctly. | Ensure battery is inserted with correct polarity (+ end towards head). | |
| Protective film still on battery. | Remove the transparent plastic film from the battery. | |
| Power button not held long enough. | Press and hold the power switch for 3 seconds to turn on. | |
| Light output is dim. | Battery is low. | Recharge the battery. |
| Lens is dirty. | Clean the lens with a soft cloth. | |
| Torch gets hot during use. | Normal operation at high brightness. | This is normal for high-powered LED torches. Reduce brightness or turn off periodically if discomfort occurs. |
| Cannot charge other devices. | Torch battery is low. | Ensure the torch battery has sufficient charge. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | GRT-UK-S9322 |
| LED Chip | XHP70.2 |
| Luminous Flux | 500,000 Lumens (Max) |
| Beam Distance | Up to 1000 meters (approx. 3280 ft) |
| Light Modes | High, Medium, Low, Strobe, SOS |
| Battery Type | Rechargeable Lithium Ion (included) |
| Charging Interface | USB-C |
| Output Function | USB-A (Power Bank) |
| Material | Aviation Aluminum Alloy |
| Waterproof Rating | IP67 |
| Dimensions | 18 x 4.3 x 4.3 cm |
| Weight | 350 g |
Image: An exploded view of the Shadowhawk S9322, highlighting its industrial design, XHP70.2 lamp beads, high transmission lens, and other key components.
8. Safety and Environmental Information
8.1 General Safety Precautions
- Do not look directly into the LED light when the torch is on, as it can cause temporary vision impairment.
- Keep out of reach of children.
- Do not disassemble the torch or battery. Unauthorized modifications can be dangerous and void the warranty.
- Use only the specified battery type and charging cable.
- Avoid dropping the torch from excessive heights, although it is designed to be robust.
8.2 Light Bulb Recycling
LED products should be recycled responsibly. Please view recycling information for this and other types of lamps according to local regulations. Many electronic waste collection points accept LED devices.
Image: A hand holding a recycling symbol composed of green leaves, emphasizing environmental responsibility.
8.3 Light Bulb Breakage and Clean Up Information
In the unlikely event of damage to the LED component, handle with care. While LEDs do not contain mercury like some traditional bulbs, proper disposal is still important. Avoid direct contact with broken components and dispose of them according to local electronic waste guidelines.
9. Warranty and Support
Shadowhawk provides customer service and support for its products. For detailed warranty information, including terms, conditions, and duration, please refer to the warranty card included with your product or visit the official Shadowhawk website. For any questions, technical assistance, or warranty claims, please contact Shadowhawk customer service directly. Contact information is typically available on the product packaging or the official brand website.
We offer 7 * 24-hour customer service. If you have any questions, do not hesitate to contact us.
