1. Introduction
Thank you for purchasing the Wishco 2000 Mini Patio Heater. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new heater. Please read this manual thoroughly before use and retain it for future reference.
This image displays the Wishco 2000 Mini Patio Heater, highlighting its radiant heating element which emits a low-glow light, protected by a metal grille. The heater features a sleek white casing.
2. Safety Information
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before using this heater.
- Do not use this heater in areas where gasoline, paint, or flammable liquids are used or stored.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Connect to properly grounded outlets only.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged:
- 1 x Wishco 2000 Mini Patio Heater (Model: MINI 2000)
- 1 x User Manual
4. Setup
The Wishco 2000 Mini Patio Heater is designed for floor mount placement. Follow these steps for proper setup:
- Unpacking: Carefully remove the heater from its packaging. Retain packaging materials for storage or if return is necessary.
- Placement: Place the heater on a stable, flat, and non-combustible surface. Ensure there is adequate clearance from walls, furniture, and other objects as specified in the Safety Information section (at least 3 feet / 0.9 meters from combustible materials). The heater is suitable for use in a living room or similar indoor/covered outdoor patio environments.
- Power Connection: Ensure the heater's power cord is fully extended and free from kinks. Plug the heater into a properly grounded electrical outlet that matches the voltage requirements of the appliance. Do not use extension cords unless absolutely necessary and ensure they are rated for the heater's power consumption.
5. Operating Instructions
The Wishco 2000 Mini Patio Heater utilizes radiant heating technology with Ultra Low-Glow elements, providing efficient warmth with minimal visible light emission.
- Power On: Once properly plugged in, locate the power switch (if present, typically on the side or rear of the unit). Flip the switch to the 'ON' position. The heating element will begin to warm up, and you will feel radiant heat.
- Heat Output: This model provides a consistent heat output. There are no adjustable heat settings.
- Power Off: To turn off the heater, flip the power switch to the 'OFF' position. Unplug the heater from the wall outlet when not in use or before performing any maintenance.
- Cool Down: Allow the heater to cool down completely before moving or storing it. The heating elements will remain hot for a period after being turned off.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your heater.
- Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Do not immerse the heater in water.
- Dust Removal: Periodically use a vacuum cleaner with a brush attachment to remove dust from the grille and internal components. Ensure the heater is unplugged during this process.
- Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging, away from direct sunlight and moisture.
- Cord Inspection: Regularly inspect the power cord and plug for any signs of damage. If damaged, do not use the heater and contact customer support.
7. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Power switch is off. Overheat protection activated. | Check if the plug is securely inserted into a working outlet. Ensure the power switch is in the 'ON' position. Unplug the heater, allow it to cool for 10-15 minutes, then plug it back in. |
| Heater produces insufficient heat. | Room size too large for heater. Obstruction of heat output. | Ensure the heater is used in an appropriately sized area. Check for any objects blocking the front grille and remove them. |
| Unusual odor or smoke. | New heater burn-off. Dust accumulation. | A slight odor or smoke may occur during initial use; this is normal and should dissipate. Unplug and clean the heater as per maintenance instructions. If odor persists, discontinue use and contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MINI 2000 |
| Product Dimensions | 3.94 x 1.97 x 0.5 inches |
| Item Weight | 2.2 pounds |
| Form Factor | Tower |
| Mounting Type | Floor Mount |
| Room Type | Living Room |
| Burner Type | Radiant |
9. Warranty and Support
For warranty information or technical support, please contact Wishco customer service. Details regarding warranty coverage and how to obtain support are typically provided with your purchase documentation or on the manufacturer's official website.
Please have your model number (MINI 2000) and purchase date available when contacting support.
