Avenli Bali Inflatable Bubble Hot Tub Spa User Manual

Introduction

Welcome to the Avenli Bali Inflatable Bubble Hot Tub Spa user manual. This guide provides essential information for the safe and efficient operation, setup, and maintenance of your new hot tub. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Image: The Avenli Bali Inflatable Bubble Hot Tub Spa, a round, grey inflatable hot tub with a white interior rim, designed for relaxation and hydrotherapy.

Safety Information

Your safety is paramount. Adhere to all safety guidelines to prevent injury or damage.

• Electrical Safety: Always connect the hot tub to a grounded power outlet. Do not use extension cords. Ensure the power cord is not damaged and is placed where it cannot be tripped over or damaged.
• Water Temperature: The recommended maximum water temperature is 40°C (104°F). Prolonged immersion in water above 38°C (100°F) can be hazardous to your health.
• Children: Always supervise children around the hot tub. Install a lockable cover when not in use to prevent unsupervised access.
• Chemicals: Handle spa chemicals with care. Follow manufacturer's instructions for dosage and storage. Never mix different chemicals.
• Health Conditions: Consult a physician before use if you are pregnant, have heart disease, high blood pressure, diabetes, or any other health condition.
• Alcohol and Drugs: Do not use the hot tub under the influence of alcohol, drugs, or medication that may cause drowsiness.
• Maintenance: Regularly clean and maintain the hot tub as per instructions to ensure hygienic water conditions.

Package Contents

Verify that all components are present and undamaged before beginning setup.

• Inflatable Hot Tub Liner
• Control Unit with Heater and Filter Pump
• Inflatable Cover with Safety Clips
• Filter Cartridge(s)
• Inflation Hose
• Repair Patch Kit
• User Manual (this document)

Note: Specific contents may vary. Refer to your product packaging for the exact list of included items.

Setup

Follow these steps for proper installation of your Avenli Bali Hot Tub. No tools are required for assembly.

1. Site Selection: Choose a flat, level surface capable of supporting the weight of the filled hot tub (approximately 700 kg for 686 liters capacity plus occupants). Ensure the area is free of sharp objects and has access to a grounded electrical outlet.
2. Unpack and Lay Out: Carefully remove all components from the packaging. Spread the ground cloth (if included) or an insulated floor protector in the chosen location, then lay out the hot tub liner on top.
3. Inflate the Hot Tub: Connect the inflation hose to the control unit's inflation port and the hot tub's air valve. Turn on the control unit's inflation function. Inflate until the hot tub is firm to the touch but not over-inflated.


Image: An Avenli Bali Hot Tub positioned on an outdoor patio, demonstrating a typical setup location.

4. Connect Control Unit: Attach the control unit to the hot tub liner by screwing the three connection pipes securely. Ensure the filter cartridge is properly installed inside the hot tub liner's filter housing.
5. Fill with Water: Using a garden hose, fill the hot tub with fresh water to the recommended fill line indicated on the interior wall. Do not overfill or underfill.
6. Power On: Plug the control unit into a grounded electrical outlet. The control panel should illuminate.

Operating

The digital control panel allows for easy management of your hot tub's functions.

Image: Close-up of the Avenli Bali Hot Tub's digital control panel, showing temperature display, power, filter, bubble, and temperature adjustment buttons.

• Power Button: Press to turn the hot tub system on or off.
• Temperature Adjustment: Use the Up and Down arrows to set your desired water temperature. The display will show the current water temperature. The heating system will activate to reach the set temperature.
• Bubble Function: Press the Bubble button to activate the 105 bubble jets for a soothing massage. Press again to turn off.
• Filter Function: Press the Filter button to activate the filtration system. It is recommended to run the filter daily to maintain water clarity.
• Temperature Unit: Press the °C/°F button to switch between Celsius and Fahrenheit display.
• Lock Button: Press and hold the Lock button to lock or unlock the control panel, preventing accidental changes.

The dual heating system heats quickly and maintains a stable temperature. Initial heating may take several hours depending on the ambient temperature and initial water temperature.

Maintenance

Regular maintenance is crucial for the longevity and hygienic operation of your hot tub.

• Water Quality: Test water regularly using spa test strips. Adjust pH, alkalinity, and sanitizer levels as needed. Maintain proper chemical balance to prevent algae and bacterial growth.
• Filter Cartridge Cleaning: The Avenli Fresh system features front- and rear-end filtration. Remove and rinse the filter cartridge with a garden hose weekly, or more frequently depending on usage. Replace the filter cartridge every 1-2 months, or when it appears worn or clogged.
• Hot Tub Cleaning: Periodically drain the hot tub and clean the interior surface with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.
• Cover Care: Clean the hot tub cover regularly with a mild soap and water solution. Ensure the cover is securely fastened with the lockable clips when the hot tub is not in use to maintain warmth and keep debris out.
• Winterization/Storage: If storing the hot tub for an extended period or during cold weather, completely drain all water, clean and dry the tub thoroughly. Deflate and fold neatly. Store in a dry, temperate location, away from direct sunlight and extreme temperatures.

Image: A cutaway view illustrating the multi-layered construction of the Avenli Bali Hot Tub wall, highlighting its durability and insulation properties.

Troubleshooting

Refer to this section for solutions to common issues.

Specifications

Key technical specifications for the Avenli Bali Inflatable Bubble Hot Tub Spa.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official Avenli website. Keep your proof of purchase for warranty claims.

If you encounter issues not covered in this manual or require further assistance, please contact Avenli customer service.