DL-pro 2805310800
Contents
DL-pro Washing Machine Door Lock Instruction Manual
Model: 2805310800 (Metalflex ZV-446 T3 / Rold DA046)
1. Introduction
This manual provides detailed instructions and information for the DL-pro washing machine door lock, a high-quality replacement part designed for various washing machine models. This component is crucial for the safe and proper operation of your appliance, ensuring the door remains securely locked during wash cycles.
The DL-pro door lock is available in two interchangeable versions: Rold DA046 44683188 (white-black) and Metalflex ZV-446 T3 2805310800 (red-black). Both versions are functionally identical and can be used as direct replacements.
2. Product Overview
The DL-pro washing machine door lock acts as a locking relay, door latch, and door contact switch. It is an essential safety component that prevents the washing machine door from being opened during operation, especially when the drum is spinning or filled with water.
Key Features:
- Door Locking Mechanism: Securely locks the washing machine door during cycles.
- Safety Interlock: Prevents accidental opening, enhancing user safety.
- Direct Replacement: Designed to be a direct fit for original parts, ensuring easy installation.
- High Compatibility: Compatible with a wide range of washing machine brands and models.
- Durable Construction: Built for longevity and reliable performance.

Figure 1: Top view of the DL-pro washing machine door lock, showing the Metalflex ZV-446 T3 model designation and electrical connectors.

Figure 2: Bottom view of the DL-pro washing machine door lock, illustrating the mounting points and overall structure.
3. Compatibility
This door lock is a suitable replacement for original parts with numbers such as 2805310800, 2805310200, 2805311600, and Smeg 814490990. It is compatible with a wide range of washing machines from various manufacturers, including but not limited to:
- Arçelik, Arctic, Altus, Beko, Blomberg, ElektraBregenz, Grundig, Leisure
- Ansonic, Atlas, Belling, Bomann, BRU, Carrefour, Continental Edison, Cylinda
- Eskimo, Essentielb, Euromaid, Far, Flavel, Friac, Fricon
- Hyundai, IFB, Kenwood, Lamona, Listo, Montpellier, Orion
- Philco, Princess, Saba, Saivod, SchaubLorenz, Smeg, Wasco, White-
Specific compatible models often include those from Beko and Blomberg, such as WMB..., DNMB..., WML..., DD WM..., EV68..., EV66..., DNM..., etc.
For a comprehensive list of compatible devices, please refer to the following images which display detailed compatibility tables. It is highly recommended to compare the model numbers of your appliance with those listed in the images to ensure proper fit.

Figure 3: Partial list of compatible washing machine models for brands like Altus, Ansonic, Arcelik, Arctic, and Atlas.

Figure 4: Partial list of compatible washing machine models for Atlas and Beko brands.

Figure 5: Further compatible Beko washing machine models.

Figure 6: Additional compatible Beko washing machine models.

Figure 7: More compatible Beko washing machine models.

Figure 8: Further compatible Beko washing machine models.

Figure 9: Final section of compatible Beko washing machine models.
4. Specifications
| Feature | Detail |
|---|---|
| Brand | DL-pro |
| Model Number | 2805310800 (interchangeable with Metalflex ZV-446 T3 or Rold DA046) |
| Type | Door Lock / Locking Relay / Door Contact Switch |
| Application | Washing Machine Door |
| Connections | 3 x 6.3 mm AMP |
| Dimensions (Packaging) | 14.6 x 6.1 x 2.3 cm |
| Batteries Required | No |
| Origin | Germany |
5. Installation Guide
Important Safety Notice: Before attempting any installation or repair, always disconnect your washing machine from the main power supply. Failure to do so can result in electric shock or serious injury. If you are unsure about any step, it is recommended to seek assistance from a qualified technician.
General Installation Steps:
- Disconnect Power: Unplug the washing machine from the wall outlet.
- Access the Door Lock:
- Open the washing machine door.
- Carefully pull back the rubber door seal (gasket) around the door opening. You may need to use a flat-head screwdriver to gently pry it away from the metal rim.
- Locate the retaining spring or wire that holds the door seal in place. Remove it.
- Once the seal is partially detached, you should be able to access the screws or clips holding the door lock in place. These are usually located on the inside of the front panel, near the door opening.
- Remove the Old Door Lock:
- Unscrew any mounting screws holding the door lock to the washing machine frame.
- Gently pull the door lock assembly out from its housing.
- Carefully disconnect the electrical connectors from the old door lock. Note their positions or take a photo for reference if necessary. The DL-pro door lock uses 3 x 6.3 mm AMP connections.
- Install the New Door Lock:
- Connect the electrical wires to the new DL-pro door lock. Ensure they are securely attached.
- Insert the new door lock into the housing, aligning it with the mounting holes.
- Secure the new door lock with the screws previously removed.
- Reassemble:
- Re-position the rubber door seal around the door opening.
- Reinstall the retaining spring or wire to secure the door seal.
- Ensure the door seal is properly seated and forms a tight seal.
- Test Functionality:
- Close the washing machine door and ensure it latches correctly.
- Plug the washing machine back into the power outlet.
- Run a short test cycle (e.g., rinse and spin) to verify that the door locks properly and the machine operates without error.
6. Operation
The door lock operates automatically as part of the washing machine's cycle. When a wash program begins, the door lock engages, preventing the door from being opened until the cycle is complete and it is safe to do so. This ensures water containment and user safety.
Once a cycle is finished and the machine has cooled down (if applicable), the door lock will disengage, allowing the door to be opened. There is no manual operation required for the door lock itself during normal use.
7. Maintenance
The DL-pro door lock is designed to be maintenance-free. However, to ensure its longevity and proper function, consider the following general tips for your washing machine:
- Keep the Door Area Clean: Regularly wipe down the door seal and the area around the door lock to prevent lint, detergent residue, or foreign objects from accumulating, which could interfere with the lock mechanism.
- Avoid Forcing the Door: Never try to force the washing machine door open when it is locked. This can damage the door lock mechanism or the door itself.
- Check for Obstructions: Occasionally inspect the door lock's latch and strike plate for any obstructions or damage.
8. Troubleshooting
If your washing machine is experiencing issues related to the door lock, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Door not locking | Faulty door lock, door not fully closed, wiring issue, control board problem. | Ensure door is firmly closed. Check wiring connections to the door lock. If the lock is new and still not working, it might be faulty or there's an issue with the washing machine's control board. |
| Door not unlocking after cycle | Faulty door lock, residual water in drum, power interruption, control board error. | Wait a few minutes after the cycle ends. Check for any error codes on the display. Try unplugging the machine for 5-10 minutes to reset it. If the problem persists, the door lock may need replacement. |
| Washing machine not starting | Door not locked, faulty door lock, power issue. | Many washing machines will not start if the door lock does not engage. Ensure the door is closed properly. If the door lock is defective, it will prevent the machine from starting. Replace the door lock if necessary. |
| Error code related to door | Door lock malfunction, wiring issue. | Consult your washing machine's user manual for specific error code meanings. Often, these codes point directly to a door lock or door sensor issue. |
If troubleshooting steps do not resolve the issue, it is advisable to contact a qualified appliance repair technician.
9. Support & Warranty
DL-pro is committed to providing high-quality replacement parts. While specific warranty details are not provided in this manual, DL-pro products are designed for durability and reliability.
For further assistance, technical support, or inquiries regarding compatibility and replacement, please visit the official DL-pro store on Amazon or contact their customer service directly. When contacting support, please have your washing machine's model number and the DL-pro door lock's model number (2805310800) ready.
You can find more information and contact details via the DL-pro Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.