Introduction
Thank you for choosing the Havit TW952 True Stereo Wireless Earbuds. These earbuds are designed to provide a high-quality audio experience with features tailored for both music listening and gaming. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new earbuds.
Key features include dual music and gaming modes, low-latency audio, full touch control, Bluetooth 5.0 connectivity, and integrated LED lighting.
Package Contents
- Havit TW952 True Stereo Wireless Earbuds (Left and Right)
- Charging Case
- USB Charging Cable
- User Manual
Product Overview

Image: The Havit TW952 True Stereo Wireless Earbuds are shown inside their open charging case. The earbuds are black with metallic grey accents and blue LED rings. The charging case is dark grey with a blue stripe, and a USB-C charging port is visible on the front.
The Havit TW952 earbuds feature an ergonomic in-ear design. Each earbud has a touch-sensitive area for controls and an LED indicator. The charging case provides portable power and also features an LED indicator.
Setup
1. Initial Charging
- Place both earbuds into the charging case.
- Connect the USB charging cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port).
- The LED indicator on the charging case will show charging status. Allow the earbuds and case to fully charge before first use.
2. Pairing with Your Device
- Ensure the earbuds are charged and inside the charging case.
- Open the charging case. The earbuds will automatically enter pairing mode, and their LED indicators will flash.
- On your device (smartphone, tablet, computer), enable Bluetooth.
- Search for "Havit TW952" in the list of available Bluetooth devices.
- Select "Havit TW952" to connect. Once connected, the earbud LEDs will stop flashing and turn off or show a steady light, and you will hear a confirmation tone.
- If pairing fails, place the earbuds back in the case, close the lid, wait a few seconds, then open the lid and try again.
Operating Instructions
Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on. Alternatively, long-press the touch area on both earbuds for 3 seconds.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging. Alternatively, long-press the touch area on both earbuds for 5 seconds.
Touch Controls
| Function | Action (Left Earbud) | Action (Right Earbud) |
|---|---|---|
| Play/Pause | Single tap | Single tap |
| Next Track | Triple tap | Triple tap |
| Previous Track | Double tap | Double tap |
| Answer/End Call | Single tap | Single tap |
| Reject Call | Long press for 2 seconds | Long press for 2 seconds |
| Activate Gaming Mode / Music Mode | Long press for 2 seconds | Long press for 2 seconds |
| Voice Assistant | Quadruple tap | Quadruple tap |
Gaming Mode: When activated, the earbuds will switch to a low-latency mode, optimizing audio synchronization for gaming. You will hear an audible prompt when switching modes.
Maintenance
- Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the earbuds and charging case frequently. Charge them regularly, even if not in constant use.
- Water Resistance: These earbuds are not waterproof. Avoid exposure to water, sweat, or high humidity.
Troubleshooting
- Earbuds not pairing with device:
- Ensure Bluetooth is enabled on your device and the earbuds are in pairing mode.
- Forget "Havit TW952" from your device's Bluetooth list and try pairing again.
- Ensure the earbuds and charging case are sufficiently charged.
- Try resetting the earbuds (see below).
- Only one earbud working:
- Place both earbuds back into the charging case, close the lid, and then open it again.
- Ensure both earbuds are charged.
- Try resetting the earbuds.
- No sound:
- Check the volume level on both your device and the earbuds.
- Ensure the earbuds are properly connected to your device.
- Try playing audio from a different application or source.
- Charging case not charging:
- Ensure the charging cable is securely connected to both the case and the power source.
- Try a different USB cable or power adapter.
Resetting the Earbuds
If you experience persistent issues, you can perform a factory reset:
- Place both earbuds into the charging case.
- Locate the reset button (often inside the case or near the charging port, refer to product diagram if available).
- Press and hold the reset button for approximately 10 seconds until the LED indicators on the earbuds flash rapidly, indicating a successful reset.
- Remove the earbuds from the case and re-pair them with your device as described in the "Setup" section.
Specifications
| Model Name | TW952 |
| Brand | Havit |
| Connectivity Technology | Wireless (Bluetooth 5.0) |
| Form Factor | In-Ear |
| Color | Black |
| Battery Type | 2 Lithium Ion batteries (included) |
| Playback Time | Up to 5 hours (earbuds) |
| Product Dimensions | 7.2 x 5 x 3 cm |
| Item Weight | 4.6 grams |
| Included Components | Charging station |
| Age Range Description | Adult |
| Materials | Multiple materials |
Warranty and Support
For warranty information and technical support, please refer to the warranty card included in your product packaging or visit the official Havit website. Please retain your proof of purchase for any warranty claims.
If you encounter any issues not covered in this manual, please contact Havit customer support for assistance.