FCCUM Digital Control Panel Instruction Manual

1. Product Overview

This manual provides instructions for the FCCUM Digital Control Panel, a replacement component designed for specific Masterbuilt Electric Smoker models. This control panel allows users to accurately set and monitor cooking temperature and time for optimal smoking results.

Image: The FCCUM Digital Control Panel, featuring a digital display, control buttons for temperature and time, and connection cables.

2. Compatibility

This digital control panel (Part Number: 9907100008) is compatible with the following Masterbuilt Electric Smoker models:

• Masterbuilt 20070511
• Masterbuilt 20071914
• Masterbuilt 20071814

Please verify your smoker's model number before installation to ensure compatibility.

Image: A graphic indicating compatibility with Masterbuilt models 20070511, 20071914, and 20071814.

3. Product Features

• High-Definition Display: Provides clear and accurate readings of cooking temperature.
• Intuitive Controls: Simple buttons for setting temperature and time.
• Integrated Meat Probe Port: Allows for connection of a meat probe to monitor internal food temperature.
• Durable Construction: Designed for reliable performance in outdoor cooking environments.

4. Installation Instructions

Before beginning installation, ensure the electric smoker is unplugged from its power source to prevent electrical hazards.

1. Remove Old Control Panel: Carefully detach the existing control panel from the smoker. Note the connections for the meat probe and the main wire connector.
2. Connect Meat Probe: Locate the 2-pin connector on the new control panel and connect it to the meat probe cable.
3. Connect to Smoker: Locate the 5-pin wire connector on the new control panel and connect it to the corresponding wire connector on the smoker unit.
4. Secure Panel: Align the control panel with the opening on the smoker. Use the stabilizing screw inserting keyhole to secure the panel in place. Ensure all connections are firm and the panel is seated correctly.

Image: Detailed view of the control panel's connection points, including the 2-pin connector for the meat probe, the 5-pin connector for the smoker's wiring, and the keyhole for the stabilizing screw.

5. Operating Instructions

This section details how to set the temperature and timer on your digital control panel.

5.1. Setting Temperature

1. Press the ON button to power on the unit.
2. Press SET TEMP once.
3. Use the +/- buttons to adjust to your desired temperature.
4. Press SET TEMP again to confirm and lock the temperature.

5.2. Setting Timer

1. Press SET TIME once.
2. Use the +/- buttons to set the desired hours.
3. Press SET TIME to move to minutes.
4. Use the +/- buttons to set the desired minutes.
5. Press SET TIME again to start the cooking cycle.

Important Note: Heat will turn off automatically when the set time has expired.

Image: A visual guide illustrating the steps for setting temperature and timer on the control panel, shown alongside a Masterbuilt electric smoker.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your digital control panel.

• Cleaning: After each use, ensure the control panel surface is clean. Use a soft, damp cloth to wipe away any grease or residue. Avoid abrasive cleaners or solvents.
• Storage: When not in use, especially for extended periods, store the smoker in a dry, covered area to protect the control panel from extreme weather conditions.
• Environmental Factors: Direct sunlight can affect the readability of the LED display. If possible, position the smoker in a shaded area during operation.

7. Troubleshooting

Refer to the following common issues and their solutions:

• Controller Displays an Error Message: If an error code appears on the display, perform a reset.
• To Reset Control Panel:
  1. Turn off the smoker.
  2. Unplug the unit from the electrical outlet.
  3. Wait for approximately ten seconds.
  4. Plug the unit back into the outlet.
  5. Turn the smoker on.
• Heat Not Starting/Turning Off: Ensure the timer is properly set. Heating will not begin until a timer is active. Heat will also turn off once the set time has expired.
• Display Readability Issues: Direct sunlight can impact the visibility of the LED display. Reposition the smoker or provide shade if necessary.

8. Specifications

Image: Dimensional drawing of the control panel, illustrating its measurements from various angles.

9. Warranty and Support

For warranty information or technical support regarding your FCCUM Digital Control Panel, please contact the seller directly through the Amazon Messenger platform. Provide your order details and a clear description of the issue for prompt assistance.

This product is a replacement part and its warranty may be subject to the terms provided by the seller at the time of purchase.