1. Product Overview
The FLYLINKTECH CF200 Battery Jump Starter is a versatile and powerful device designed to jump start 12V vehicles with up to 6.0L gasoline or 5.0L diesel engines. Beyond its primary function, it also serves as a portable power bank and features an integrated LED flashlight with multiple modes, making it an essential tool for automotive emergencies and outdoor activities.
Figure 1: FLYLINKTECH CF200 Jump Starter and included accessories.
2. Important Safety Information
Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always ensure the jump starter is fully charged before use for optimal performance.
- Do not jump start a vehicle if the battery voltage is extremely low (below 10V) without consulting a professional.
- Avoid short-circuiting the jumper clamps. Do not connect the red and black clamps together.
- Keep the device away from water, moisture, and extreme temperatures. It is IP67 waterproof, but prolonged submersion is not recommended.
- Do not disassemble the unit. Refer all servicing to qualified service personnel.
- Keep out of reach of children.
- Operate within the specified temperature range: -20℃ to 60℃ (-4°F to 140°F).
Figure 2: The smart clamps provide multiple protection features including short circuit, high temperature, over charge, over discharge, reverse polarity, and over current protection.
3. Package Contents
- FLYLINKTECH CF200 Jump Starter
- Smart Jumper Cables
- Micro USB Cable
- User Manual
4. Initial Setup and Charging
Before first use, fully charge the jump starter. It is recommended to charge the product once every 3 months to maintain optimal battery health, even if not in use.
Charging the Jump Starter:
- Connect the Micro USB cable to the jump starter's Micro USB Input port.
- Connect the other end of the Micro USB cable to a 5V/2A USB power adapter (not included).
- The LED indicator lights will illuminate to show the charging progress. All lights will be solid when fully charged.
Note: Do not charge the jump starter immediately after jump starting an engine. Allow at least 30 minutes for the unit to cool down.
Figure 3: The jump starter can also function as a portable power bank to charge your electronic devices.
5. Operating Instructions
5.1. Jump Starting a Vehicle
- Connect Smart Jumper Cables: Insert the blue plug of the smart jumper cables into the 12V Auto Jump Port on the jump starter. Ensure a firm connection.
- Attach Clamps to Battery: Connect the red (+) clamp to the positive (+) terminal of the vehicle's battery. Connect the black (-) clamp to the negative (-) terminal of the vehicle's battery. The indicator light on the smart clamp will show green if the connection is correct and safe. If it shows red, check the connections for reverse polarity or short circuit.
- Start Vehicle: Once the smart clamp indicator is green, start your vehicle's engine.
- Remove Clamps: After the vehicle starts, immediately remove the jumper clamps from the car battery, then disconnect the smart jumper cables from the jump starter.
Figure 4: Step-by-step guide for jump starting your vehicle.
Video 1: Demonstration of the FLYLINKTECH CF200 Jump Starter in action, showing its features and how to jump start a vehicle.
5.2. Using as a Power Bank
The jump starter features dual USB output ports (5V 2.4A) and a Type-C input/output port, allowing you to charge various electronic devices such as smartphones, tablets, and other USB-powered gadgets.
- Connect your device's charging cable to one of the USB output ports or the Type-C port on the jump starter.
- The jump starter will automatically begin charging your device.
5.3. LED Flashlight Functions
The built-in LED flashlight offers three modes for different situations:
- Illumination Mode: Press and hold the power button for 3 seconds to turn on the flashlight.
- Strobe Mode: Press the power button once more to activate the strobe light, useful for signaling.
- SOS Mode: Press the power button a third time to activate the SOS signal, for emergency situations.
- To turn off the flashlight, press the power button again or press and hold for 3 seconds.
Figure 5: The integrated LED flashlight provides three useful modes for various scenarios.
5.4. Emergency Tools (Glass Breaker & Belt Cutter)
For added safety in emergencies, the CF200 is equipped with a glass breaker and a seatbelt cutter. The glass breaker is located at one end of the unit, and the belt cutter is safely concealed under a cap. These tools are designed for use in critical situations where quick escape from a vehicle is necessary.
6. Maintenance and Storage
- Clean the jump starter with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Store the unit in a cool, dry place away from direct sunlight and heat sources.
- For long-term storage, ensure the unit is charged to at least 50% and recharge it every 3 months to prevent deep discharge and prolong battery life.
- Keep the smart jumper cables clean and free from corrosion.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start | Jump starter battery is low. | Recharge the jump starter. |
| Clamps are not properly connected. | Ensure clamps are securely connected to the correct battery terminals. Check smart clamp indicator for green light. | |
| Vehicle battery is severely damaged. | Consult a professional mechanic. | |
| Smart clamp shows red light | Reverse polarity or short circuit. | Disconnect clamps and re-attach correctly (red to positive, black to negative). Ensure clamps do not touch each other. |
| Device not charging | Charging cable or adapter issue. | Try a different Micro USB cable or power adapter. |
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model | CF200 |
| Peak Current | 1200A |
| Engine Compatibility | Up to 6.0L Gas / 5.0L Diesel |
| Battery Capacity | 13200mAh |
| Input | 5V/2A (Micro USB) |
| Output | 5V 2.4A (Dual USB), 12V Jump Start |
| Operating Temperature | -20℃ to 60℃ (-4°F to 140°F) |
| Lifetime | >1000 cycles |
| Dimensions | 158 x 88 x 33mm (6.22 x 3.46 x 1.29 inches) |
| Weight | 380g (0.83 lbs) |
| Waterproof Rating | IP67 |
Figure 6: Detailed diagram showing the dimensions and various ports/features of the jump starter.
9. Warranty and Customer Support
FLYLINKTECH provides 12 months technical support and after-sales customer service. If you encounter any problems during use, please feel free to contact us through Amazon. Our professional technical team is always here to help you.
For further assistance, please refer to the official FLYLINKTECH store on Amazon: FLYLINKTECH Store
