Introduction
Thank you for choosing the OLEVS Model 6898GD002 Men's Quartz Wristwatch. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
Image: Front view of the OLEVS Model 6898GD002 men's quartz wristwatch, featuring a gold-toned stainless steel case and bracelet, a white dial, and a day-date window at the 3 o'clock position.
Setup
Setting the Time and Date
- Pull the Crown: Gently pull the crown (the knob on the side of the watch) out to position 2 for setting the date, or position 3 for setting the time.
- Set the Date: In position 2, turn the crown clockwise or counter-clockwise to adjust the day and date. Avoid setting the date between 9 PM and 3 AM, as this is when the watch's internal mechanism is engaged in changing the date, and manual adjustment can cause damage.
- Set the Time: In position 3, turn the crown to move the hour and minute hands. Set the time to your desired setting. Ensure you differentiate between AM and PM when setting the date, as the date changes once every 24 hours.
- Push the Crown Back: Once the time and date are set, push the crown back into position 1 (normal operating position) to start the watch.
Image: A close-up view of the watch dial and crown, illustrating the mechanism for time and date adjustment.
Adjusting the Bracelet
The stainless steel bracelet features a push-button hidden clasp. For proper fit, the bracelet may need to be adjusted by adding or removing links. This procedure typically requires specialized tools and is best performed by a professional watchmaker to prevent damage to the bracelet or clasp.
Operating Your Watch
Timekeeping
Your OLEVS watch is equipped with an imported Japanese Quartz movement, providing accurate timekeeping. Once the time is set, the watch will operate continuously until the battery requires replacement.
Day and Date Display
The watch features a day and date window at the 3 o'clock position. The day and date will automatically advance at midnight. If the watch has been stopped or the date is incorrect after a month with fewer than 31 days, manually adjust it as described in the "Setting the Time and Date" section.
Luminous Function
The hands and hour markers of your watch are treated with a luminous material. Exposure to light will charge this material, allowing the watch to glow in low-light conditions for a period of time.
Image: This composite image illustrates the watch's HD luminous feature, showing the hands and markers glowing in the dark, alongside a magnified view of the high hardness coated glass mirror.
Water Resistance
Your watch is rated for 30 meters (3ATM) water resistance. This means it is suitable for daily splash or short immersion in water, such as washing hands or light rain. It is not suitable for showering, swimming, diving, or snorkeling. Avoid operating the crown or pushers when the watch is wet.
Image: The watch is shown with water splashing around it, demonstrating its 30m water resistance suitable for daily splashes.
Maintenance
Cleaning
To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners or abrasive materials.
Battery Replacement
The quartz movement is powered by a battery designed for long-term running (over 2 years). When the watch stops, it indicates the battery needs replacement. Battery replacement should be performed by a qualified watch technician to ensure the watch's water resistance and proper functioning are maintained.
Water Resistance Care
- Always ensure the crown is fully pushed in before any contact with water.
- Avoid exposing the watch to extreme temperature changes, as this can affect the seals.
- If the watch is exposed to saltwater, rinse it immediately with fresh water and dry thoroughly.
- Have the water resistance seals checked periodically by a professional, especially after battery replacement.
Troubleshooting
- Watch Not Running:
Check if the crown is fully pushed into position 1. If it is, the battery may need replacement. Consult a professional watch technician.
- Incorrect Time/Date:
Refer to the "Setting the Time and Date" section to reset. Ensure the crown is fully pushed in after adjustment.
- Condensation Inside the Crystal:
This indicates a potential breach in water resistance. Stop using the watch immediately and seek professional service to prevent further damage to the movement.
Specifications
Image: A visual representation of the product parameters, including dimensions and material details, alongside images of the watch in different color variations.
| Feature | Detail |
|---|---|
| Brand Model Number | OLEVS / 6898GD002 |
| Movement | Imported Japanese Quartz Movement |
| Mirror Material | High Hardness Coated Glass Mirror |
| Watchband Material | Stainless Steel Bracelet |
| Clasp Type | Push Button Hidden Clasp |
| Water Resistance | 30 Meters (3ATM) |
| Case Diameter | 39 mm |
| Case Thickness | 9 mm |
| Chain Width | 20 mm |
| Watch Weight | 85g |
| Functions | Day, Date, Luminous Hands/Markers |
Warranty and Support
Your OLEVS watch comes with a 2-year warranty service. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.
For warranty claims, technical assistance, or any inquiries regarding your watch, please contact OLEVS customer support through the retailer where the product was purchased or refer to the official OLEVS website for contact information.
Additionally, a 30-day return policy is offered for products purchased directly from authorized sellers, allowing for returns without reason within this period.
