Product Overview
This manual provides comprehensive instructions for the Mounting Dream MD2413-MX Full Motion TV Wall Mount. This product is engineered to securely mount televisions ranging from 26 to 55 inches, supporting VESA patterns from 75x75mm to 400x400mm, and a maximum weight of 77 lbs (35 kg). It offers full motion capabilities including tilt, swivel, and extension for optimal viewing flexibility.
Please note: This product may be bundled with the MD2380 mount, which supports 32-65 inch TVs up to 99 lbs (45 kg) with VESA 400x400mm. This manual primarily focuses on the MD2413-MX model, but specifications for both are provided for clarity.
Important Safety Information
Adhering to these safety guidelines is critical for preventing injury and property damage.
- This TV wall mount is NOT FOR DRYWALL INSTALLATION. It must be mounted into solid wood studs or concrete walls.
- Ensure your TV's weight does not exceed the maximum load capacity of 77 lbs (35 kg) for the MD2413-MX.
- Verify your TV's VESA mounting pattern is within the supported range of 75x75mm to 400x400mm.
- Always check for electrical wires, water pipes, or other hazards behind the wall before drilling.
- Concrete anchors are available upon request if you are mounting to a concrete wall.
- If you are unsure about any part of the installation process, consult a qualified professional.
Package Contents
Please verify that all components are present and undamaged before beginning installation. Refer to the product packaging for a detailed list of included hardware and fasteners.
Specifications
| Feature | MD2413-MX | MD2380 (if bundled) |
|---|---|---|
| Compatible TV Size | 26-55 inches | 32-65 inches |
| Max Load Capacity | 77 lbs (35 kg) | 99 lbs (45 kg) |
| VESA Compatibility | 75x75mm - 400x400mm | Max 400x400mm |
| Tilt Angle | +5° to -15° | +5° to -15° |
| Swivel Angle | Up to ±90° (depends on TV size) | Up to ±90° (depends on TV size) |
| Extension from Wall | 2.7 inches (69mm) to 16.7 inches (424mm) | 3.4 inches to 17.5 inches |
| Post-Installation Leveling | ±4° | Not specified, but common for full-motion mounts |
| Material | Metal | Metal |
| Color | Black | Black |
Setup and Installation
Proper installation is crucial for the safety and stability of your TV. Follow these steps carefully.
Pre-Installation Checks
- Verify TV VESA Pattern: Locate the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between these holes (center to center) to determine your TV's VESA pattern. Ensure it falls within the mount's supported range (75x75mm to 400x400mm for MD2413-MX).
- Check TV Weight: Confirm your TV's weight (without its stand) does not exceed 77 lbs (35 kg) for the MD2413-MX.
- Assess Wall Type: This mount is designed for installation into wood studs or solid concrete walls. DO NOT install on drywall alone.
- Identify Stud Locations: Use a stud finder to locate the edges and center of the wood studs in your desired mounting location. Mark the center of the studs.
- Check for Blocked Inputs: Before mounting, ensure the TV brackets will not block any input ports on your television.
Mounting Steps (General Overview)
- Attach TV Brackets: Secure the TV brackets to the back of your television using the appropriate screws, washers, and spacers provided. Ensure they are centered and tightened securely.
- Install Wall Plate: Position the wall plate on the wall, aligning it with the marked stud centers. Drill pilot holes and secure the wall plate to the wood studs using the lag bolts and washers. For concrete walls, use concrete anchors (available upon request).
- Hang TV onto Wall Plate: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Secure the TV to the wall plate using the safety screws or locking mechanisms.
Image: The MD2413-MX mount demonstrating its sturdy construction and maximum weight capacity of 77 lbs.
Image: Illustration of the post-installation leveling feature, allowing for ±4° adjustment to ensure the TV is perfectly horizontal.
Operating Instructions
Once installed, your full motion TV mount allows for flexible viewing adjustments.
Adjusting Tilt
The MD2413-MX mount allows for a tilt range of +5° (upward) to -15° (downward). This feature helps reduce glare from lights or windows and provides an optimal viewing angle. To adjust, loosen the tilt adjustment knobs on the TV brackets, set the TV to the desired angle, and then tighten the knobs securely to lock the position.
Image: The MD2413-MX mount demonstrating its tilt capability from +5° to -15° to reduce glare.
Adjusting Swivel
The full motion arm allows you to swivel your TV left or right, up to ±90°, depending on your TV size and wall clearance. Gently push or pull the TV to the desired viewing angle. No locking mechanism is typically required for swivel adjustments.
Image: The MD2413-MX mount showing its swivel range, allowing the TV to be angled up to ±90° for optimal viewing from various positions.
Extending and Retracting
The MD2413-MX mount can extend your TV out from the wall up to 16.7 inches (424mm) and retract it back to a minimum distance of 2.7 inches (69mm). Gently pull the TV forward or push it back to achieve your preferred distance from the wall. Ensure cables are not pinched during movement.
Image: The MD2413-MX mount illustrating its extension capability up to 16.7 inches and retraction to 2.7 inches from the wall.
Image: A side view of the MD2413-MX mount demonstrating its extension and retraction range from 2.7 inches to 16.7 inches.
Maintenance
To ensure the longevity and safe operation of your TV mount, perform the following maintenance checks periodically:
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Fastener Check: Periodically check all screws, bolts, and connections on both the wall plate and TV brackets to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
- Movement Check: Test the tilt, swivel, and extension functions to ensure smooth operation. If movement becomes stiff or noisy, check for any obstructions or debris in the moving parts.
Troubleshooting
If you encounter any issues with your TV mount, refer to the following common solutions:
- TV is not level after installation: Use the post-installation leveling feature (±4°) to adjust the TV's horizontal position. This can typically be done by loosening specific screws on the TV brackets, adjusting, and then re-tightening. Refer to the installation section for details.
- Mount feels loose or unstable: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket fasteners. Ensure they are securely tightened into solid wood studs or concrete. Do not re-hang the TV until stability is confirmed. If the issue persists, contact customer support.
- Difficulty adjusting TV position: Check for any cables or obstructions that might be hindering movement. Ensure all adjustment knobs (for tilt) are sufficiently loosened before attempting to reposition the TV. If the arm is stiff, ensure no fasteners are overtightened.
Warranty and Customer Support
Mounting Dream is committed to providing high-quality products and excellent customer service.
- Warranty: This product is backed by a 10-year warranty. Please retain your proof of purchase for warranty claims.
- US-Based Customer Support: For any pre-purchase questions, installation assistance, or troubleshooting, please contact our US-based customer support team. We aim for quick responses to address your needs.
- Contact Information: Refer to the product packaging or the official Mounting Dream website for the most current contact details and support resources.
Image: Information regarding Mounting Dream's US-based customer service, quick response, and 10-year warranty.
