Marmitek 8392

Download PDF
Contents

Marmitek Stream T2 Pro Additional HDMI Transmitter User Manual

Model: 8392

Product Overview

The Marmitek Stream T2 Pro is an additional HDMI transmitter designed to extend the capabilities of your Marmitek Stream S2 Pro system. It enables wireless transmission of HD1080p/60 Hz video and audio signals over a range of up to 20 meters. This device supports various wireless display technologies including AirPlay, Miracast, and DLNA, allowing for flexible content sharing from compatible devices.

Marmitek Stream T2 Pro HDMI Transmitter

Image: Marmitek Stream T2 Pro HDMI Transmitter. This image shows the compact, rectangular transmitter unit with an HDMI connector on one end, a small antenna that can be folded up, and a circular button with an LED indicator on the top surface. The sides feature ventilation holes, and a micro-USB port is visible on one side.

Setup Instructions

Follow these steps to set up your Marmitek Stream T2 Pro transmitter:

  1. Power Connection: Connect the Marmitek Stream T2 Pro to a power source using the provided USB cable. The device can be powered via a USB port on your display or a USB power adapter (not included).
  2. HDMI Connection: Plug the HDMI connector of the Stream T2 Pro into an available HDMI input port on your source device (e.g., laptop, game console, media player).
  3. Pairing with Receiver: Ensure your Marmitek Stream S2 Pro receiver is powered on and connected to your display. The T2 Pro transmitter should automatically attempt to pair with the S2 Pro receiver. If pairing does not occur automatically, refer to the S2 Pro receiver's manual for manual pairing instructions, which typically involve pressing a pairing button on both units.
  4. Source Selection: Select the correct HDMI input on your source device to output the signal to the Stream T2 Pro.
  5. Display Selection: On your display (TV, projector), select the HDMI input connected to the Stream S2 Pro receiver.

Note: For optimal performance, ensure the transmitter and receiver are within the specified 20-meter range and have a clear line of sight, or minimal obstructions.

Operating the Device

Once the Marmitek Stream T2 Pro is successfully paired with its receiver, operation is straightforward:

  • Automatic Connection: The transmitter will automatically send the HDMI signal from your source device to the paired receiver.
  • Wireless Display Modes:
    • Miracast: For Windows and Android devices, enable Miracast (Wireless Display/Screen Mirroring) and select the Marmitek Stream S2 Pro receiver from the list of available devices.
    • AirPlay: For Apple devices (iPhone, iPad, Mac), use the AirPlay feature to mirror your screen or stream content to the Marmitek Stream S2 Pro receiver.
    • DLNA: Compatible with various devices and media servers for streaming multimedia content.
  • LED Indicator: The LED indicator on the transmitter provides status information (e.g., solid light for connected, blinking for searching/pairing). Refer to the S2 Pro receiver manual for specific LED patterns.

Maintenance

To ensure the longevity and optimal performance of your Marmitek Stream T2 Pro, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive materials.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Ventilation: Ensure the ventilation holes on the device are not blocked to prevent overheating.
  • Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.

Troubleshooting

If you encounter issues with your Marmitek Stream T2 Pro, consult the following common troubleshooting steps:

ProblemPossible CauseSolution
No signal on display.
  • Incorrect HDMI input selected on source or display.
  • Transmitter not powered.
  • Not paired with receiver.
  • Out of range or obstructions.
  • Verify HDMI input selection on both source and display.
  • Ensure the transmitter is properly powered via USB.
  • Perform pairing procedure as per S2 Pro manual.
  • Reduce distance between transmitter and receiver, remove obstructions.
Intermittent signal or poor quality.
  • Interference from other wireless devices.
  • Weak signal due to distance or obstructions.
  • Source device resolution incompatibility.
  • Move the device away from other wireless devices (e.g., Wi-Fi routers, cordless phones).
  • Ensure clear line of sight and reduce distance.
  • Check if source device resolution is supported (up to 1080p/60Hz).
Cannot connect via AirPlay/Miracast.
  • Device not on the same network (for AirPlay/DLNA).
  • Feature not enabled on source device.
  • Ensure both the source device and the Stream S2 Pro receiver are connected to the same Wi-Fi network.
  • Enable screen mirroring/wireless display feature on your source device.

Technical Specifications

FeatureDetail
BrandMarmitek
Model Number8392
Product TypeAdditional HDMI Transmitter
Max ResolutionHD1080p/60 Hz
Wireless RangeUp to 20 meters
Connectivity TechnologyUSB, HDMI
Connector TypeHDMI
Wireless CommunicationMiracast, AirPlay, DLNA
Special FeaturesPortable
Compatible DevicesLaptops, various source devices with HDMI output
Item Weight200 Grams
Output Power5 Watts
Supported Internet ServicesBrowser, Netflix (Note: Functionality depends on paired receiver and source device capabilities.)

Warranty and Support

Specific warranty information for the Marmitek Stream T2 Pro is not available in the provided product details. Please refer to the official Marmitek website or your purchase documentation for detailed warranty terms and conditions.

For technical support, product registration, or further inquiries, please visit the official Marmitek support page or contact their customer service directly. Contact information can typically be found on the manufacturer's website or in the original product packaging.

© 2023 Marmitek. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.