AMBITFUL 95cm Octagon Softbox with Honeycomb Grid and Bowens Mount Instruction Manual

1. Introduction

The AMBITFUL 95cm Octagon Softbox is a light modifier designed for photography and videography. It is used to diffuse and soften harsh light sources, creating a more even and flattering illumination. This softbox features a Bowens mount for compatibility with various studio lights and includes a honeycomb grid for directional light control. Its detachable assembly and foldable design make it suitable for both studio and outdoor use.

Image: The AMBITFUL 95cm Octagon Softbox set up with a light stand, providing soft illumination for a model.

2. What's in the Box

Verify that all components are present before proceeding with assembly.

• Softbox fabric
• Honeycomb grid
• Speed ring (Bowens mount)
• Inner diffuser
• Outer diffuser
• Support rods
• Carrying bag

Image: All components of the softbox, including the main octagonal fabric, inner diffuser, outer diffuser, and honeycomb grid.

3. Safety Information

• Ensure the softbox is securely attached to your light source and light stand to prevent accidental falls.
• When using with "hot" light sources (e.g., quartz halogen, tungsten bulbs), verify that the softbox is heat-rated for the wattage of the light to avoid fire hazards.
• Do not expose the softbox to excessive moisture or rain.
• Keep out of reach of children.

4. Assembly Instructions

Follow these steps to assemble your AMBITFUL Octagon Softbox:

1. Unpack the Softbox: Remove all components from the carrying bag.
2. Insert Support Rods: Take the softbox fabric and insert each support rod into the corresponding chuck on the speed ring diagonally. Ensure the rods are fully seated.
3. Secure the Speed Ring: Once all rods are in place, the softbox will take its octagonal shape. The speed ring should be firmly attached to the softbox structure.
4. Attach Inner Diffuser: Secure the inner white diffuser to the internal loops or Velcro tabs inside the softbox.
5. Attach Outer Diffuser: Attach the outer white diffuser to the front edge of the softbox using the Velcro strips.
6. Install Honeycomb Grid (Optional): If desired, attach the honeycomb grid to the outer Velcro strips on the front of the softbox, over the outer diffuser.

Image: Visual guide for quick installation, detailing how to insert support rods, install the speed ring, and attach the diffusers and grid.

Assembly Video Guide

5. Operating Instructions

The AMBITFUL Octagon Softbox is designed to provide soft, even, and bright light for various photographic needs.

Attaching to a Light Source

The softbox features a standard Bowens mount. Align the speed ring of the softbox with the Bowens mount on your studio strobe or continuous light. Insert and twist until it locks securely into place. Ensure the light source is off and cooled down before attachment.

Image: Details of the Bowens mount for secure attachment to compatible light sources, along with the adjustable angle chuck.

Using Diffusers

The softbox includes an inner and an outer diffuser. These white fabric layers spread the light evenly, reducing harsh shadows and creating a soft, flattering light quality. Use both diffusers for maximum softness. The inner diffuser helps to eliminate hot spots from the light source, while the outer diffuser provides a broad, even spread of light.

Image: The softbox with its film-grade soft light cloth, designed to produce soft, accurate, and even light without harsh cross-lighting.

Using the Honeycomb Grid

The honeycomb grid attaches to the front of the softbox via Velcro. It is used to narrow the beam of light and prevent light spill, providing more directional control and creating a more dramatic effect with defined shadows. This is particularly useful for accentuating specific areas or creating a focused light pattern.

Image: A visual comparison illustrating the effect of using the softbox with and without the honeycomb grid, showcasing enhanced light direction and reduced spill.

6. Maintenance and Care

• Cleaning: Gently wipe the exterior of the softbox with a soft, damp cloth. For the interior reflective surface, use a dry, lint-free cloth. The diffusers and grid can be hand-washed with mild soap and air-dried if necessary.
• Storage: Disassemble the softbox and store all components in the provided carrying bag. This protects the fabric and rods from damage and keeps all parts together.
• Handling: Avoid sharp objects that could puncture or tear the softbox fabric. Do not forcefully bend the support rods beyond their intended flexibility.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact AMBITFUL customer service through their official website or the retailer where the product was purchased. Keep your proof of purchase for warranty claims.