Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Keep fingers clear of moving parts during assembly to avoid injury.
- Ensure all bolts and screws are securely tightened before use.
- Do not use power tools for initial tightening to prevent stripping screws or damaging components. Hand-tighten until all parts are aligned, then fully tighten.
- Do not stand on the bed frame.
- Regularly check all connections to ensure they remain tight.
Product Overview
The Yaheetech Queen Upholstered Platform Bed Frame features a classic wing-edge headboard design with durable wooden slats, eliminating the need for a box spring. Its robust construction ensures stability and noise-free use.
Figure 1: Fully assembled Yaheetech Queen Upholstered Platform Bed Frame in dark gray, featuring a wing-edge headboard and wooden slats, ready for a mattress.
Package Contents
Verify all components are present before beginning assembly. Refer to the included installation manual for a complete list of parts and hardware.
- Upholstered Headboard (A)
- Upholstered Footboard (B)
- Upholstered Side Rails (C1, C2)
- Headboard Support Posts (D1, D2)
- Center Support Beam (E)
- Adjustable Support Legs (F)
- Wooden Slats (G)
- Hardware Pack (Bolts, Washers, Allen Wrench)
- Installation Manual
Figure 2: A composite image showcasing the channel tufted headboard, rock-solid support structure, and sturdy bed legs, emphasizing key design elements.
Setup / Assembly Instructions
Assembly is designed to be straightforward. It is recommended to have two people for easier and quicker assembly. Lay out all components on a soft, clean surface to prevent scratches.
Step 1: Attach Headboard Support Posts
- Position the upholstered headboard (A) on the floor with the rear facing upwards.
- Attach the headboard support posts (D1, D2) to the rear of the headboard using the specified bolts and washers from the hardware pack. Hand-tighten only.
Step 2: Assemble Footboard and Side Rails
- Attach the footboard (B) to the side rails (C1, C2) using the designated hardware. Ensure the orientation of the footboard legs is correct. Hand-tighten only.
- Connect the assembled footboard and side rails to the headboard assembly. Hand-tighten all connections.
Step 3: Install Center Support Beam and Legs
- Insert the center support beam (E) into the designated slots on the headboard and footboard.
- Attach the adjustable support legs (F) to the center support beam and the side rails as indicated in the manual. Adjust the height of the legs so they firmly touch the floor.
Step 4: Place Wooden Slats
- Unroll or place the wooden slats (G) across the bed frame. The slats are typically connected by a fabric strap for easy positioning.
- Secure the slats to the side rails using the provided screws. Ensure even spacing.
Figure 3: An image highlighting the durable wooden slat support system and central metal beam, designed for mattress stability and longevity.
Step 5: Final Tightening
- Once all components are assembled and aligned, use the provided Allen wrench to fully tighten all bolts and screws. Do not overtighten.
Assembly Video Guide
Video 1: This official video from Yaheetech demonstrates the assembly process for the Queen Upholstered Bed Frame, providing visual guidance for each step.
Operating Instructions
This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring. Simply place your mattress (latex, foam, or spring) directly onto the wooden slats.
- Ensure the mattress is centered and evenly distributed on the slats.
- The bed frame features a 6-inch under-bed space, allowing most robot vacuum cleaners to pass through for easy cleaning.
Figure 4: This image demonstrates the 6-inch under-bed clearance, allowing for easy cleaning and robot vacuum access.
Maintenance
Proper maintenance will extend the life and appearance of your bed frame.
- Cleaning: The upholstered fabric should be dry cleaned only. Do not use liquid cleaners or abrasive materials.
- Hardware Check: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they are still tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Slats: Ensure all wooden slats remain securely in place and are not damaged. Replace any broken slats immediately.
Troubleshooting
If you encounter any issues with your bed frame, refer to the following common solutions:
- Squeaking Noises: Squeaking is often caused by loose connections. Re-tighten all bolts and screws on the headboard, footboard, side rails, and center support beam. Ensure all wooden slats are properly seated and secured.
- Instability/Wobbling: Check that all structural components are correctly assembled and all hardware is fully tightened. Ensure the adjustable support legs are making firm contact with the floor.
- Mattress Sagging: Verify that all wooden slats are intact, evenly spaced, and securely fastened. Ensure the center support beam and its legs are properly installed and adjusted.
Specifications
| Size | Queen |
| Product Dimensions | 82.5"L x 62"W x 45"H |
| Material | Engineered Wood, Linen Blend Fabric, Foam |
| Color | Dark Gray |
| Maximum Weight Capacity | 800 lb |
| Under-Bed Clearance | 6 inches |
| Assembly Required | Yes |
| Compatible Mattress Size | Queen (No Box Spring Needed) |
Figure 5: A detailed diagram illustrating the dimensions of the Queen size bed frame, including length, width, headboard height, and under-bed clearance.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Yaheetech website. Keep your purchase receipt for any warranty claims.
