1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VONROC VPower 20V Cordless Power Tool Pack. Please read these instructions carefully before using the tools and retain them for future reference. This pack includes a cordless percussion drill, jigsaw, oscillating multi-tool, angle grinder, circular saw, reciprocating saw, and an LED work light, along with two 4.0Ah batteries and a charger.
Image 1.1: The complete VONROC VPower 20V Cordless Power Tool Pack, including various tools, two 4.0Ah batteries, a charger, and a tool bag.
2. General Safety Instructions
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep this manual for future reference.
2.1. Work Area Safety
- Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2.2. Electrical Safety
- Power tool plugs must match the outlet. Never modify the plug in any way.
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
2.3. Personal Safety
- Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the tool.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
2.4. Power Tool Use and Care
- Do not force the power tool. Use the correct power tool for your application.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
- Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
2.5. Battery Tool Use and Care
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
3. Package Contents
Your VONROC VPower 20V Cordless Power Tool Pack includes the following items:
- 1x VONROC 20V Cordless Percussion Drill
- 1x VONROC 20V Cordless Jigsaw
- 1x VONROC 20V Cordless Oscillating Multi-Tool
- 1x VONROC 20V Cordless Angle Grinder
- 1x VONROC 20V Cordless Circular Saw
- 1x VONROC 20V Cordless Reciprocating Saw
- 1x VONROC 20V LED Work Light
- 2x VONROC 4.0Ah VPower 20V Batteries
- 1x VONROC Fast Charger
- 1x VONROC Tool Bag
- Assorted accessories (e.g., drill bits, saw blades, grinding discs, sanding pads - specific accessories may vary)
Image 3.1: The VONROC tool bag, designed for convenient storage and transport of the tool pack components.
4. Setup and Initial Use
4.1. Charging the Battery
- Connect the charger to a suitable power outlet.
- Slide the 4.0Ah VPower 20V battery onto the charger until it clicks into place.
- Observe the charger's indicator lights. A full charge is indicated when the light changes from red to green (or as specified in the charger's individual manual).
- Once fully charged, disconnect the battery from the charger and the charger from the power outlet.
4.2. Attaching the Battery to a Tool
To attach the battery, align the battery pack with the base of the tool handle and slide it in until it locks securely. To remove, press the release button (if present) and slide the battery out.
4.3. General Accessory Installation
Always ensure the tool is switched off and the battery is removed before installing or changing any accessories (e.g., drill bits, saw blades, grinding discs). Refer to the specific tool's section for detailed instructions on accessory installation.
5. Operating Instructions
Each tool in the VONROC VPower 20V pack is designed for specific tasks. Always wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves when operating any power tool.
5.1. Cordless Percussion Drill
Suitable for drilling into wood, metal, and masonry (with percussion function), as well as driving screws. Select the appropriate drill bit or screwdriver bit for your task. Adjust torque settings and drill/hammer mode as needed.
5.2. Cordless Jigsaw
Ideal for cutting curves and intricate shapes in wood, plastic, and thin metal. Ensure the correct blade is installed for the material. Adjust the pendulum action and speed for optimal cutting performance.
Image 5.2.1: A user operating the VONROC cordless jigsaw to cut a wooden panel, demonstrating its use for precise cuts.
5.3. Cordless Oscillating Multi-Tool
Versatile for cutting, sanding, scraping, and grinding in tight spaces. Attach the desired accessory (e.g., plunge cut blade, sanding pad). This tool is excellent for flush cuts in wood, plastic, and non-ferrous metals.
Image 5.3.1: A user utilizing the VONROC cordless oscillating multi-tool for a detailed cutting task on a wall surface.
5.4. Cordless Angle Grinder
Used for grinding, cutting, and deburring metal, as well as cutting tiles. Always use the appropriate grinding or cutting disc and ensure the guard is correctly positioned. Wear heavy-duty gloves and eye protection.
Image 5.4.1: A user operating the VONROC cordless angle grinder to cut a piece of material, highlighting its application for abrasive tasks.
5.5. Cordless Circular Saw
Designed for making straight and bevel cuts in wood, laminate, and chipboard. Adjust the cutting depth and bevel angle as required. Ensure the blade is sharp and suitable for the material being cut.
Image 5.5.1: A user making a straight cut on a wooden board with the VONROC cordless circular saw.
5.6. Cordless Reciprocating Saw
Excellent for rough cutting, demolition work, and pruning. Use appropriate blades for wood, metal, or plastic. Its design allows for cutting in confined spaces and through various materials.
Image 5.6.1: A user pruning tree branches with the VONROC cordless reciprocating saw, demonstrating its utility for outdoor and demolition tasks.
5.7. Cordless LED Work Light
Provides illumination for dark work areas. Simply attach a charged 20V battery to activate. Position the light to ensure adequate visibility without glare.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your VONROC tools.
- Cleaning: After each use, clean the tools with a dry cloth. Remove any dust, chips, or debris from ventilation openings. Do not use water or chemical cleaners.
- Accessory Inspection: Regularly inspect all accessories (blades, bits, discs) for wear, damage, or dullness. Replace worn accessories promptly.
- Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods.
- Storage: Store all tools and batteries in the provided tool bag, in a dry, secure location out of reach of children.
Image 6.1: The interior of the VONROC tool bag, showing ample space for organized storage of tools and accessories.
7. Troubleshooting
This section addresses common issues you might encounter with your VONROC VPower 20V tools.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start. | Battery not charged or improperly inserted. | Ensure battery is fully charged and correctly seated in the tool. |
| Reduced power or short operating time. | Battery charge is low or battery is old/damaged. | Recharge the battery. If issue persists, consider replacing the battery. |
| Excessive vibration or poor cutting/drilling performance. | Dull or incorrect accessory (blade/bit/disc). | Replace with a sharp, appropriate accessory for the material. |
| Tool overheats. | Overloading the tool or blocked ventilation. | Reduce load, allow tool to cool, clear ventilation openings. |
8. Technical Specifications
| Feature | Detail |
|---|---|
| Brand | VONROC |
| Model Number | S5_TB501XX |
| Power Source | Battery Powered |
| Voltage | 20 Volts |
| Battery Type | Lithium-ion |
| Battery Capacity | 4.0 Ah (x2 included) |
| Product Dimensions (L x W x H) | 68 x 41 x 38 cm (overall package) |
| Weight | 17.1 kilograms (overall package) |
| Included Components | Percussion Drill, Jigsaw, Oscillating Multi-Tool, Angle Grinder, Circular Saw, Reciprocating Saw, LED Work Light, 2x 4.0Ah Batteries, Fast Charger, Tool Bag. |
Image 8.1: The VONROC tool bag displaying its dimensions (60cm length, 30cm width, 26cm height).
9. Warranty and Support
VONROC is committed to providing high-quality tools and excellent customer service. In the event of a defect, VONROC's after-sales service (SAV) policy often involves sending a new machine without requiring the return of the defective unit, aiming to reduce unnecessary CO2 emissions and streamline the support process.
For specific warranty terms, service requests, or technical assistance, please refer to the official VONROC website or contact their customer support directly. Always provide your model number (S5_TB501XX) and purchase details when seeking support.
You can find more information and contact details on the official VONROC brand store: VONROC Brand Store.
