EP 25 Ft 1200 Lumen COB LED Work Light Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your EP 25 Ft 1200 Lumen COB LED Work Light. This robust work light is designed for various indoor and outdoor applications, offering bright illumination and versatile positioning options.

Key features include a powerful 1200 lumen COB LED, a durable 25-foot 16/3 SJTW extension cord, a strong magnetic base for hands-free attachment, and a 360-degree rotatable hanging hook. Additionally, it features a grounded outlet on the handle for convenient power access.

Figure 1.1: Overview of the EP 25 Ft 1200 Lumen COB LED Work Light and its integrated 25-foot extension cord.

2. Safety Information

Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Electrical Safety: Ensure the power source matches the voltage requirements (120 Volts). Do not use the light with damaged cords or plugs. Do not immerse the light in water.
• Usage Environment: This product is suitable for indoor and outdoor use. Avoid using in extremely wet conditions or near flammable materials.
• Heat: The LED light may generate heat during operation. Do not touch the light surface directly after extended use.
• Eye Protection: Do not stare directly into the light source. The high intensity light can cause temporary vision impairment.
• Children and Pets: Keep the work light out of reach of children and pets.
• Maintenance: Disconnect from power before cleaning or performing any maintenance.

3. Product Components and Features

Familiarize yourself with the various parts and features of your EP Work Light.

Figure 3.1: Labeled diagram of the EP Work Light, highlighting the COB LED, push button, anti-slip handle, LED power indicator, and the 25-foot 16/3 AWG SJTW cord.

• COB LED Light: Provides 1200 lumens of bright, uniform illumination.
• Push Button: Controls the power to the LED light.
• Anti-slip Handle: Ergonomically designed for a secure grip and reduced fatigue.
• LED Power Indicator: Illuminates when the light is receiving power.
• 25 Ft 16/3 SJTW Cord: Heavy-duty, extra-long cord for extended reach, suitable for indoor and outdoor use.
• Strong Magnetic Base: Integrated neodymium magnet allows secure attachment to metal surfaces.
• 360° Rotatable Hook: Retractable and sturdy hook for flexible positioning.
• Grounded Outlet: Located at the bottom of the handle, acts as an extension for other electrical tools.

4. Setup

Follow these steps to prepare your work light for use:

1. Unpack: Carefully remove the work light from its packaging. Retain packaging for future storage or transport.
2. Inspect: Examine the work light and its cord for any signs of damage. Do not use if any part is damaged.
3. Positioning:
   • Using the Magnetic Base: Attach the integrated magnetic base to any suitable metal surface for hands-free operation. Ensure the surface is clean and the magnet is securely fastened.
   

   Figure 4.1: The ultra-strong magnetic base allows for secure attachment to metal surfaces.

   • Using the Rotatable Hook: Extend the 360-degree rotatable hook from the top of the light. Hang the light from a suitable support structure. The hook can be rotated to direct the light as needed.
   

   Figure 4.2: The 360-degree swivel hook provides flexible hanging options and can be folded for storage.
4. Connect to Power: Plug the 3-prong grounded plug into a standard 120V AC grounded electrical outlet.

5. Operating Instructions

Operating your EP Work Light is straightforward:

1. Turn On/Off: Press the push button located on the handle to turn the COB LED light on or off.

Figure 5.1: The COB LED provides 1200 lumens of high-efficiency, uniform light.
2. Using the Grounded Outlet: The grounded outlet at the base of the handle can be used to power other corded tools or electrical devices. Ensure the total wattage of connected devices does not exceed the work light's capacity.


Figure 5.2: The grounded outlet allows the work light to function as a convenient extension point for other tools.

3. Adjusting Position: Reposition the light as needed using the magnetic base or the rotatable hook to achieve optimal illumination for your workspace.

6. Maintenance

Proper maintenance ensures the longevity and performance of your work light.

• Cleaning: Disconnect the light from the power source before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the work light in a dry, cool place, away from direct sunlight and extreme temperatures. Coil the cord neatly to prevent kinks or damage.
• Cord Inspection: Regularly inspect the power cord for cuts, fraying, or other damage. If the cord is damaged, discontinue use and replace it with a suitable cord by a qualified professional.

7. Troubleshooting

If you encounter issues with your EP Work Light, refer to the following common problems and solutions:

8. Specifications

Detailed technical specifications for the EP 25 Ft 1200 Lumen COB LED Work Light:

• Model Number: GI-COB-1200LM-CORD-15FT-YL
• Light Source: COB LED
• Brightness: 1200 Lumens
• Wattage: 10 Watts
• Voltage: 120 Volts
• Cord Length: 25 Feet
• Cord Type: 16/3 SJTW Heavy Duty Black Cord
• Material: Metal, Plastic, Rubber
• Mounting: Hook and Magnetic Base
• Color: Yellow
• Item Weight: 3.08 pounds
• Package Dimensions: 16.77 x 4.76 x 4.02 inches

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact EP customer service directly. Keep your purchase receipt as proof of purchase.

Contact Information:
Please visit the official EP website or refer to the contact details provided with your product for support.