Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your Gevril Men's Canal St Automatic Watch, Model 46501. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Figure 1: Front view of the Gevril Men's Canal St Automatic Watch, Model 46501. This image displays the watch face with its black dial, silver hour markers, and date window at the 3 o'clock position.
Product Overview
The Gevril Canal St Automatic Watch is a precision timepiece featuring a Swiss automatic movement. Key components include:
- Case: 44mm Octagon 316L Stainless Steel.
- Dial: Black, with silver indices and a date display at the 3 o'clock position.
- Movement: Swiss Automatic, visible through an exhibition case back.
- Water Resistance: 50 meters (5 ATM).
- Strap: Genuine Leather.
Figure 2: Rear view of the Gevril Canal St Automatic Watch, highlighting the exhibition case back which allows visibility of the Swiss automatic movement.
Setup
1. Initial Winding
As an automatic watch, it is powered by the motion of your wrist. However, for initial setup or after a period of inactivity, manual winding is recommended to ensure sufficient power reserve.
- Ensure the crown is in position 1 (fully pushed in, not pulled out).
- Turn the crown clockwise approximately 20-30 times. This will provide enough power for the watch to start ticking.
- Wear the watch regularly to maintain its power reserve through natural wrist movement.
2. Setting the Time and Date
Figure 3: Side view of the Gevril Canal St Automatic Watch, illustrating the position of the crown for time and date adjustments.
- Setting the Date:
- Pull the crown out to position 2 (first click).
- Turn the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this window, first adjust the time outside this period, then set the date, and finally reset the time.
- Push the crown back to position 1.
- Setting the Time:
- Pull the crown out to position 3 (second click). The second hand will stop.
- Turn the crown to move the hour and minute hands to the correct time. Ensure you pass 12 o'clock twice if setting for PM hours to correctly advance the date.
- Once the time is set, push the crown back to position 1. The second hand will resume movement.
Operating Instructions
Your Gevril Canal St Automatic Watch operates continuously as long as it is worn regularly or manually wound. The automatic movement harnesses kinetic energy from your wrist's motion to power the watch.
- Power Reserve: When fully wound, the watch typically has a power reserve of approximately 38-42 hours. If unworn for an extended period, it will stop and require manual winding and time/date setting.
- Water Resistance: The watch is water resistant to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, but not for diving or prolonged water immersion. Do not operate the crown while the watch is wet or submerged.
Maintenance
- Cleaning: Wipe the watch case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture and harsh chemicals.
- Avoid Extreme Temperatures: Protect your watch from extreme heat or cold, as these can affect the accuracy and longevity of the movement.
- Magnetic Fields: Keep the watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices) as they can interfere with the watch's accuracy.
- Service: Automatic watches benefit from periodic servicing (typically every 3-5 years) by a qualified watchmaker to ensure optimal performance and lubrication of the movement.
- Strap Care: Leather straps are subject to wear and tear. Avoid prolonged exposure to water, sweat, and direct sunlight to extend their lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops or runs intermittently. | Insufficient power reserve. | Manually wind the watch by turning the crown 20-30 times clockwise. Wear the watch regularly. |
| Watch runs too fast or too slow. | Exposure to magnetic fields; needs regulation. | Keep away from strong magnetic sources. If problem persists, consult a qualified watchmaker for demagnetization or regulation. |
| Date does not change at midnight. | Time is set for AM instead of PM, or date was set during restricted hours. | Advance the time past 12 o'clock to ensure correct AM/PM setting. Reset the date outside of 9 PM - 3 AM. |
| Condensation under the crystal. | Water ingress or extreme temperature change. | Immediately take the watch to a qualified watchmaker for inspection and repair to prevent damage to the movement. |
Specifications
- Model Number: 46501
- Case Diameter: 44mm
- Case Material: 316L Stainless Steel
- Movement: Swiss Automatic
- Dial Color: Black
- Date Display: Yes, at 3 o'clock
- Water Resistance: 50 Meters (5 ATM)
- Strap Material: Genuine Leather
- Approximate Weight: 2.99 Pounds (including packaging)
Warranty and Support
For warranty information and customer support, please refer to the official Gevril website or contact your authorized Gevril retailer. Keep your proof of purchase for warranty claims.
Figure 4: The Gevril watch is presented in its official packaging, which typically includes warranty documentation.
You can visit the Gevril store on Amazon for more information: Gevril Official Store
