Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of the LUXRITE 3 Inch Gimbal Adjustable LED Recessed Light. This product is designed for various indoor and outdoor applications, offering versatile lighting solutions with adjustable features.
Key Features
- 5 Color Temperature Options: Select between 2700K (warm white), 3000K (soft white), 3500K (natural white), 4000K (cool white), or 5000K (bright white) using a simple switch.
- Swivel Lighting: Features a 360° rotatable eyeball and 30° tilt for directional light adjustment.
- Dimmable: Smooth dimming capabilities from 100% down to 10% output.
- Integrated Design: Canless LED recessed light design with an integrated J-box for easy installation without separate housing.
- Durability: Rated for 50,000 hours of lifetime, damp location use, and IC rated for insulation contact.
- Safety Certified: ETL Listed for safety and reliability.
Product Video Overview
This video provides a visual overview of the LUXRITE Gimbal LED Downlight, highlighting its features and design.
Important Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage. It is recommended that a qualified electrician perform the installation.
- Always turn off power at the circuit breaker before installation or servicing.
- Ensure all electrical connections comply with local codes and ordinances.
- Do not install in areas with excessive vibration or heat.
- Do not modify the fixture in any way.
- Wear safety glasses and gloves during installation.
Setup and Installation
Components Included
Each unit includes the LED light fixture, an integrated transformer, recessed trim, and a separate J-box for wiring.
Image illustrating the 3-in-One design of the recessed light, including the LED light, transformer, recessed trim, and the J-box with wiring components.
Installation Steps
- Prepare the Opening: Cut a hole in the ceiling according to the specified dimensions for the 3-inch fixture.
- Wiring: Open the J-box cover. Connect the supply wires to the corresponding wires in the J-box using the quick connectors (black to black, white to white, ground to ground). Ensure all connections are secure.
- Secure J-Box: Place all wiring back into the J-box and close the cover. Insert the J-box through the mounting hole in the ceiling.
- Connect Fixture: Connect the LED light fixture to the J-box using the plug and twist connection.
- Insert Fixture: Push the spring clips on the fixture upwards and insert the fixture into the ceiling opening until it sits flush.
Visual guide for the easy installation process of the LUXRITE recessed light.
Operating Instructions
Color Temperature Selection
Each recessed light features a switch on the J-box that allows you to select one of five color temperatures: 2700K (Warm White), 3000K (Soft White), 3500K (Natural White), 4000K (Cool White), or 5000K (Bright White). Adjust this switch before final installation or by accessing the J-box if already installed, to achieve your desired lighting ambiance.
Demonstration of the 5 selectable color temperatures available with the LUXRITE recessed light.
Dimming Functionality
The LUXRITE recessed light is dimmable from 100% to 10% output. To utilize this feature, ensure you are using a compatible LED dimmer switch. Adjust the dimmer to achieve your preferred brightness level.
Visual representation of the dimming range from 100% to 10% output.
Adjustable Lighting Direction
The gimbal design allows for precise light direction. The fixture can be rotated 360° and tilted up to 30°, enabling you to direct light to specific areas or objects as needed.
Diagram detailing the 40° beam angle, 30° tilt range, and 360° rotation capabilities of the fixture.
Care and Maintenance
The LUXRITE LED Recessed Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- No User-Serviceable Parts: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
Troubleshooting
If you experience issues with your LUXRITE LED Recessed Light, refer to the following common troubleshooting steps:
- Light Does Not Turn On:
- Check the circuit breaker to ensure power is supplied to the fixture.
- Verify all wiring connections are secure and correct.
- Ensure the wall switch is in the ON position.
- Light Flickers:
- Confirm that the dimmer switch (if used) is compatible with LED lighting.
- Check for loose wiring connections.
- Incorrect Color Temperature:
- Access the J-box and verify the color temperature selection switch is set to the desired position.
- Dimming Issues:
- Ensure the dimmer is rated for LED lights and is properly installed.
- Some dimmers may have a minimum load requirement; ensure enough fixtures are connected.
If these steps do not resolve the issue, contact customer support or a qualified electrician.
Technical Specifications
Detailed specifications for the LUXRITE 3 Inch Gimbal Adjustable LED Recessed Light:
Dimensions of the LUXRITE 3 Inch Gimbal LED Recessed Light and its accompanying J-box.
| Specification | Value |
|---|---|
| Brand | LUXRITE |
| Model Number | LR23268-4 |
| Size | 3 Inches |
| Wattage | 8 Watts |
| Brightness | 600 Lumens |
| Color Temperature | 2700K, 3000K, 3500K, 4000K, 5000K Selectable |
| Voltage | 120 Volts |
| Lifetime | 50,000 Hours |
| Material | Metal, Plastic |
| Indoor/Outdoor Usage | Indoor, Outdoor (Damp Rated) |
| Special Features | 5 Color Temperature Selectable, Damp Rated, Dimmable, Directional Lighting, IC Rated |
| Certification | ETL Listed |
Summary of reliable lighting features and specifications.
Warranty and Customer Support
Warranty Information
This LUXRITE product is covered by a 3-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
For specific details regarding warranty claims or to inquire about extended protection plans, please refer to your purchase documentation or contact customer support.
Customer Support
For technical assistance, troubleshooting, or any questions regarding your LUXRITE 3 Inch Gimbal Adjustable LED Recessed Light, please contact LUXRITE customer support. Contact information can typically be found on the product packaging or the official LUXRITE website.
