HKZOOI Dog Training Collar TC-001B User Manual

Introduction

The HKZOOI Dog Training Collar is designed to assist in correcting various dog behaviors such as barking, chasing, chewing, and biting. This system features a remote transmitter and two waterproof receivers, allowing for simultaneous training of two dogs. It offers three distinct training modes: beep, vibration, and static shock, with adjustable intensity levels to suit your dog's needs. The collar is equipped with safe silicone contact prongs and boasts a long remote range for effective indoor and outdoor use.

Please read this user manual thoroughly before operating the device to ensure safe and effective training.

Package Contents

Verify that all items listed below are included in your package:

• 1x Remote Transmitter
• 2x Receiver Collars
• 2x Adjustable Collar Belts
• 1x Test Light
• 2x USB Charging Cables
• 1x User Operating Guide (this manual)

Image: Overview of the HKZOOI Dog Training Collar system, showing the remote transmitter and two receiver collars.

Product Overview

Remote Transmitter

The remote transmitter allows you to control the training collars from a distance. It features an LCD screen displaying battery level, channel selection (CH1/CH2), and stimulation levels. Dedicated buttons are provided for beep, vibration, and static shock modes, along with '+' and '-' buttons for adjusting intensity.

Receiver Collar

Each receiver collar is designed to be worn by your dog. It contains the training module and is connected to an adjustable collar belt. The receiver is IPX7 waterproof, making it suitable for use in various weather conditions and during water activities. It features non-removable silicone contact prongs for safe and comfortable use.

Image: The remote transmitter and two receiver collars, highlighting the three training modes (Beep, Vibration, Shock) and the ability to train two dogs simultaneously.

Setup

1. Charging the Devices

Before first use, fully charge both the remote transmitter and the receiver collars. Charging typically takes 2-3 hours.

• Connect the USB charging cable to the charging port on the remote and receivers.
• Plug the other end into a USB power source (e.g., computer, power bank, phone adapter).
• The charging indicator will show the charging status and turn off or change color when fully charged.

Image: Illustration showing the battery life of the remote and receiver, and how to charge them using the USB charging port with various power sources.

2. Fitting the Collar

Proper fit of the receiver collar is crucial for effective and safe operation.

• Place the receiver collar around your dog's neck, ensuring the contact prongs touch the skin.
• Adjust the strap so it is snug but not too tight. You should be able to fit two fingers comfortably between the strap and your dog's neck.
• The collar belt is adjustable from 8 to 25 inches, suitable for dogs weighing 15 to 100 lbs. Excess strap can be trimmed and the end singed to prevent fraying.
• Important: Do not leave the collar on your dog for more than 12 hours per day to prevent skin irritation.

Image: Guide illustrating how to adjust the collar for dogs weighing 15 to 100 lbs, including instructions on trimming and sealing the excess strap.

Image: Close-up of the receiver collar showing the safe, fixed silicone contact points, designed to prevent skin irritation.

Operating Instructions

1. Turning On/Off

• Remote: Press any button to activate. It will automatically enter standby mode after a period of inactivity.
• Receiver: Press and hold the power button on the receiver until the indicator light turns on/off.

2. Selecting a Channel (for multiple dogs)

The remote supports training two dogs simultaneously using channels CH1 and CH2.

• Press the channel selection button (often labeled "1/2" or similar) on the remote to switch between CH1 and CH2.
• Ensure the correct channel is selected for the dog you intend to train.

3. Training Modes

The collar offers three training modes: Beep, Vibration, and Static Shock. Each mode has adjustable intensity levels.

• Beep Mode: Press the Beep button to emit an audible tone from the receiver. This is often used for initial warnings or positive reinforcement.
• Vibration Mode: Press the Vibration button to deliver a non-harmful vibration. Intensity can be adjusted using the '+' and '-' buttons.
• Static Shock Mode: Press the Shock button to deliver a static stimulation. Note: To prevent accidental shock, you must double-click the Shock button for the function to activate. Intensity can be adjusted using the '+' and '-' buttons. Always start with the lowest effective level.

The remote has a "ZERO Level" lock setting for shock mode to avoid accidental activation. Ensure you understand and utilize this safety feature.

4. Remote Control Range

The remote control range is up to 1640 feet (550 yards) in barrier-free areas and approximately 1000 feet (330 yards) in areas with barriers. This allows for flexible training both indoors and outdoors.

Image: Illustration demonstrating the long control range of the training collar, effective in both open and obstructed environments.

Maintenance

1. Cleaning

• Regularly clean the receiver collar and contact prongs with a damp cloth to prevent dirt buildup and ensure proper contact with your dog's skin.
• Ensure the devices are dry before charging.

2. Waterproofing

• The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. Your dog can swim, shower, and play in the rain while wearing it.
• Important: Always ensure the charging port on the receiver is securely sealed before exposing it to water.
• Note: The remote transmitter is NOT waterproof. Avoid exposing it to water.

Image: The IPX7 waterproof receiver collar shown in a water environment, emphasizing the need to seal the charging port.

3. Battery Life

• Receiver: Up to 15 days in standby time, 7-10 days in working time.
• Remote: Up to 90 days in standby time, 25 days in working time.
• Recharge when the battery indicator shows low power.

Troubleshooting

• Collar not responding:
  • Check if both remote and receiver are turned on.
  • Ensure the remote's battery is charged.
  • Verify the correct channel (CH1/CH2) is selected on the remote.
  • Re-pair the remote and receiver if necessary (refer to pairing instructions, if available in a more detailed manual).
• No static shock:
  • Ensure you double-click the shock button to activate the mode.
  • Check the shock intensity level; increase if needed.
  • Confirm the contact prongs are making proper contact with the dog's skin. Use the test light to verify functionality.
• Skin irritation:
  • Remove the collar immediately.
  • Ensure the collar is not worn for more than 12 hours per day.
  • Check for proper fit; it should be snug but not overly tight.
  • Clean the contact area on the dog's neck and the collar prongs regularly.
  • Consult a veterinarian if irritation persists.

Specifications

Safety Information

• This training collar is intended for use with healthy dogs only. Do not use on aggressive, sick, or injured dogs.
• Always supervise your dog during training sessions.
• Do not use the static shock mode excessively or as a primary punishment. It should be used as a last resort and at the lowest effective level.
• Avoid leaving the collar on your dog for more than 12 hours per day to prevent pressure necrosis or skin irritation.
• Regularly check your dog's neck for any signs of irritation or sores. If found, discontinue use until the skin heals.
• Keep the device out of reach of children.
• The remote is not waterproof; keep it dry.

Warranty and Support

HKZOOI products are manufactured with quality and performance in mind. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official HKZOOI website. Please retain your proof of purchase for warranty claims.