Bburago 18-38056-00000100

Download PDF
Contents

Bburago 1:43 Red Bull Racing RB16B F1 Diecast Model with Helmet - Sergio Perez Instruction Manual

1. Introduction

This manual provides instructions for the Bburago 1:43 scale diecast model of the Red Bull Racing RB16B Formula 1 car, driven by Sergio Perez in 2021. This highly detailed replica is designed for display and collection, accurately capturing the aerodynamic design and authentic sponsor decals of the original vehicle.

Bburago 1:43 Red Bull Racing RB16B diecast model car, side view.

Image 1: Side view of the Bburago 1:43 Red Bull Racing RB16B diecast model car.

2. Safety Information

Caution: Small Parts. This product contains small parts and is not suitable for children under 5 years of age due to potential choking hazards. Adult supervision is recommended for younger users.

3. Setup

  1. Unboxing: Carefully remove the model car from its packaging, including the outer sleeve and the acrylic display case.
  2. Display Base: The model is typically secured to a display base. To remove the car from the base, locate the screw mechanism underneath the base. Gently twist the screw counter-clockwise to loosen and detach the car.
  3. Placement: Place the model on a flat, stable surface away from direct sunlight, extreme temperatures, and high humidity to preserve its condition.
Bburago 1:43 Red Bull Racing RB16B diecast model car in its display box.

Image 2: The diecast model car packaged in its display box.

4. Operating

This Bburago diecast model is primarily intended for display. While the wheels are functional and allow for rolling, it is recommended to handle the model gently to avoid damage to its intricate details and decals. Avoid applying excessive force or dropping the model.

Bburago 1:43 Red Bull Racing RB16B diecast model car, rear-side view.

Image 3: Rear-side view of the diecast model, showcasing detailed rear wing and tires.

5. Maintenance

  • Cleaning: To clean the model, gently wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the paint, decals, or plastic components.
  • Dust Protection: For optimal preservation, keep the model inside its acrylic display case to protect it from dust and environmental factors.

6. Troubleshooting

  • Loose Parts: If any small parts become loose, they can often be reattached using a small amount of model-safe adhesive. Handle with care.
  • Dust Accumulation: If dust accumulates inside the display case, carefully remove the case and clean both the model and the interior of the case as described in the Maintenance section.

7. Specifications

BrandBburago
Model Number18-38056-00000100
Scale1:43
MaterialMetal (Diecast)
Dimensions (Product)2.87 x 5.75 x 2.5 inches
Item Weight4.9 ounces (140 Grams)
Recommended Age5 years and up
Included ComponentsDiecast vehicle, Display base, Acrylic case
Bburago 1:43 Red Bull Racing RB16B diecast model car held in a hand for scale.

Image 4: The diecast model shown in hand to illustrate its 1:43 scale.

8. Warranty & Support

Specific warranty information for this Bburago diecast model is not provided in the product details. For any support inquiries or questions regarding your product, please refer to the manufacturer's official website or contact the retailer from whom the product was purchased.

© 2023 Bburago. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.