Arcchio 9939025

Download PDF
Contents

Arcchio LED 'Albiona' Pendant Lamp Instruction Manual

Model: 9939025 | Brand: Arcchio

Introduction

Welcome and thank you for choosing the Arcchio LED 'Albiona' pendant lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.

Arcchio Albiona LED pendant lamp, a modern design with three intertwined black rings, suspended from a black ceiling rose.

Image: The Arcchio Albiona LED pendant lamp, featuring three intertwined black rings with integrated LED lighting, suspended by thin cables.

Safety Information

To ensure safe operation and prevent damage, please observe the following safety guidelines:

  • Electrical Installation: Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
  • Power Disconnection: Always disconnect the main power supply at the circuit breaker or fuse box before attempting any installation, maintenance, or cleaning.
  • Voltage: Ensure the supply voltage matches the lamp's specified voltage (230 Volts).
  • Handling: Handle the lamp with care to avoid damage to the LED components or the structure.
  • Environment: This lamp is rated IP20, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in damp or wet locations.
  • Light Source: The LED light sources are integrated and not user-replaceable. Do not attempt to open or modify the LED modules.

Package Contents

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer.

  • Arcchio LED 'Albiona' Pendant Lamp Assembly
  • Ceiling Rose with integrated LED drivers
  • Mounting Hardware (screws, wall plugs)
  • Instruction Manual
Top view of the Arcchio Albiona pendant lamp's mounting plate, showing the three rings nested together and the suspension wires.

Image: Top view of the Arcchio Albiona pendant lamp's mounting plate, showing the three rings nested together and the suspension wires.

Internal view of the Arcchio Albiona pendant lamp's ceiling rose, revealing the LED drivers and wiring connections.

Image: Internal view of the Arcchio Albiona pendant lamp's ceiling rose, revealing the LED drivers and wiring connections.

Setup and Installation

Important: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes.

  1. Prepare for Installation: Turn off the main power supply to the installation area at the circuit breaker. Ensure the power is off using a voltage tester.
  2. Mark Drilling Points: Position the ceiling rose against the ceiling at the desired installation location. Mark the drilling points for the mounting screws.
  3. Drill Holes and Insert Wall Plugs: Drill holes at the marked points and insert appropriate wall plugs suitable for your ceiling material.
  4. Connect Wiring: Open the ceiling rose. Connect the household electrical wires to the terminal block inside the ceiling rose, ensuring correct polarity (Live, Neutral, Earth). Secure all connections.
  5. Mount Ceiling Rose: Secure the ceiling rose to the ceiling using the provided screws.
  6. Adjust Suspension Cables: Carefully adjust the length of the suspension cables to achieve the desired height and orientation of the lamp rings. Ensure the rings are balanced.
  7. Final Check: Double-check all connections and ensure the lamp is securely mounted.
  8. Restore Power: Turn the main power supply back on.
Dimensional diagram of the Arcchio Albiona pendant lamp, showing a diameter of 800mm for the largest ring, a ceiling rose diameter of 260mm, and an adjustable maximum height of 2500mm.

Image: Dimensional diagram of the Arcchio Albiona pendant lamp, showing a diameter of 800mm for the largest ring, a ceiling rose diameter of 260mm, and an adjustable maximum height of 2500mm.

Operating Instructions

The Arcchio 'Albiona' LED pendant lamp is designed for simple operation via a standard wall switch.

  • Turning On/Off: Use your existing wall switch to turn the lamp on or off.
  • Light Output: The integrated LEDs provide a consistent light output suitable for various indoor environments.
The Arcchio Albiona pendant lamp illuminated, showcasing its modern design and light output in a room setting.

Image: The Arcchio Albiona pendant lamp illuminated, showcasing its modern design and light output in a room setting.

Maintenance

Proper care will ensure the longevity and appearance of your Arcchio 'Albiona' pendant lamp.

  • Cleaning: Disconnect power before cleaning. Wipe the lamp gently with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or LED components.
  • LED Care: The integrated LED light sources are designed for a long lifespan and do not require replacement. Do not attempt to service or replace the LEDs yourself.

Troubleshooting

If you encounter any issues with your lamp, refer to the following table for common problems and solutions.

ProblemPossible CauseSolution
Lamp does not turn on.No power supply; loose wiring connection; faulty wall switch.Check circuit breaker. Ensure all wiring connections are secure (consult an electrician). Test wall switch.
Light flickers.Loose wiring connection; incompatible dimmer switch (if applicable); power fluctuations.Check wiring connections (consult an electrician). Ensure power supply is stable.
Lamp is damaged.Physical impact; manufacturing defect.Do not attempt repairs. Contact your retailer or a qualified technician.

Specifications

FeatureDetail
BrandArcchio
Model Number9939025
Dimensions (L x W x H)80 x 80 x 250 cm (adjustable height)
Weight4.66 Kilograms
MaterialMetal
ColourBlack, White (LED elements)
Light Source TypeIntegrated LED
Total Wattage111.6 Watts
Voltage230 Volts
IP RatingIP20
Number of Lights3 (rings)
Power SourceCorded Electric
Switch Installation TypeCeiling Mount
EU Energy Label for the Arcchio Albiona LED pendant lamp, indicating an energy efficiency class of E and energy consumption of 119 kWh/1000h.

Image: EU Energy Label for the Arcchio Albiona LED pendant lamp, indicating an energy efficiency class of E and energy consumption of 119 kWh/1000h. For more details, refer to the EPREL database.

For detailed product information, visit the EPREL database: https://eprel.ec.europa.eu/qr/745000

Warranty and Support

This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific terms and conditions regarding warranty coverage and duration. For technical support, troubleshooting assistance beyond what is provided in this manual, or to make a warranty claim, please contact your retailer or the Arcchio customer service department. Ensure you have your proof of purchase and model number (9939025) available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.