Hyper Tough 14-IN-1 Nut Driver Bit Set

Introduction

The Hyper Tough 14-IN-1 Nut Driver Bit Set is a versatile tool designed for various fastening applications. This set combines common SAE and Metric nut driver sizes into a single, convenient system, making it an essential addition to any toolbox. The bit driver handle features a comfortable, non-slip grip for enhanced control and torque application.

Package Contents

• 1 x Bit Driver Handle with 1/4 inch Hex End
• 7 x SAE Nut Driver Bits (3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2")
• 7 x Metric Nut Driver Bits (5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm)

Setup

Unpacking

Carefully remove all components from the packaging. Inspect the handle and all 14 nut driver bits for any signs of damage. Retain the packaging for future storage or transport if desired.

Component Identification

The set consists of a main driver handle and two organized holders containing the nut driver bits. One holder contains the SAE (Standard American English) sizes, and the other contains the Metric sizes. Each bit is clearly marked with its size for easy identification.

Operating Instructions

Attaching Nut Driver Bits

1. Select the appropriate SAE or Metric nut driver bit size for your fastener.
2. Insert the hex shank end of the chosen bit into the 1/4 inch hex end of the driver handle.
3. Push firmly until the bit is securely seated in the handle. The hex end of the handle is designed to hold the bits firmly during use.

Using the Nut Driver

Once the desired bit is attached, align the nut driver bit with the fastener (nut or bolt head). Apply firm, steady pressure and rotate the handle clockwise to tighten or counter-clockwise to loosen. The soft-grip handle is designed to provide maximum comfort and allow for effective torque application without slippage.

Maintenance

Cleaning

After each use, wipe down the handle and bits with a clean, dry cloth to remove any dirt, grease, or debris. For stubborn grime, a slightly damp cloth can be used, followed by immediate drying. Do not use abrasive cleaners or solvents, as these may damage the finish or grip material.

Storage

Store the Hyper Tough Nut Driver Bit Set in a dry environment to prevent rust or corrosion. Keep the bits organized in their respective holders to ensure easy access and prevent loss. The original packaging or a dedicated tool box is recommended for storage.

Troubleshooting

Specifications

Warranty and Support

Warranty Information

This Hyper Tough product comes with a 5-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use. Please refer to the product packaging or contact customer support for full warranty terms and conditions.

Customer Support

For any questions, concerns, or assistance with your Hyper Tough 14-IN-1 Nut Driver Bit Set, please contact Hyper Tough customer support. Keep your purchase receipt and product model information handy when contacting support.