1. Product Overview
Image 1.1: The Total TS2045565 Jig Saw, featuring its turquoise body, red trigger, and metal base plate with an installed blade.
The Total TS2045565 Jig Saw is a versatile power tool designed for cutting various materials, primarily wood and steel. It operates on a 220-240V~50/60Hz power supply and features a robust 400W motor. With a no-load speed ranging from 800 to 3000 revolutions per minute (RPM), it offers precise control for different cutting tasks. This model is capable of cutting wood up to 55mm thick and steel up to 3mm thick. It comes equipped with a set of three saw blades to get you started.
2. Safety Instructions
Always adhere to the following safety guidelines to prevent injury and ensure safe operation of your jig saw:
- Read the Manual: Before operating the tool, thoroughly read and understand all instructions and safety warnings in this manual.
- Wear Personal Protective Equipment (PPE): Always wear safety glasses, hearing protection, and a dust mask when operating the jig saw.
- Secure Workpiece: Always clamp or otherwise secure the workpiece to a stable surface. Do not hold the workpiece by hand.
- Maintain a Clean Work Area: Keep your work area well-lit and free of clutter. Cluttered or dark areas invite accidents.
- Avoid Dangerous Environments: Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Check for Damage: Before each use, inspect the tool for any damage. Do not use the tool if the cord, plug, or any other part is damaged.
- Disconnect Power: Always disconnect the power plug from the power source before making any adjustments, changing accessories, or storing the tool.
- Use Correct Blade: Ensure the correct type of blade is used for the material being cut.
- Keep Hands Clear: Keep hands and fingers away from the cutting area and the blade.
- Do Not Overreach: Maintain proper footing and balance at all times.
3. Package Contents
Your Total TS2045565 Jig Saw package should include the following items:
- 1 x Total TS2045565 Jig Saw (400W)
- 3 x Saw Blades (for various materials)
- 1 x User Manual
If any items are missing or damaged, please contact your retailer immediately.
4. Technical Specifications
| Feature | Specification |
|---|---|
| Model | TS2045565 |
| Brand | Total |
| Input Power | 400W |
| Voltage | 220-240V~50/60Hz |
| No-load Speed | 800-3000 rpm |
| Cutting Capacity (Wood) | 55mm |
| Cutting Capacity (Steel) | 3mm |
| Blade Material | Alloy Steel |
| Power Source Type | Corded Electric |
| Color | Turquoise |
| Item Weight | 100 g |
| Product Dimensions | 1 x 1 x 1 cm |
| Special Features | Depth Adjustment |
5. Setup
5.1. Blade Installation
Always ensure the tool is unplugged from the power source before installing or changing blades.
- Unplug the Tool: Disconnect the jig saw from the power outlet.
- Open Blade Clamp: Locate the blade clamp mechanism, usually a lever or screw, near the front of the tool. Open or loosen it according to your model's design.
- Insert Blade: Insert the shank of the saw blade into the blade holder with the teeth facing forward. Ensure the blade is fully seated and aligned correctly.
- Secure Blade: Close or tighten the blade clamp mechanism firmly to secure the blade in place. Gently pull on the blade to confirm it is locked and will not come loose during operation.
- Check Blade Alignment: Verify that the blade is straight and not bent or misaligned.
5.2. Adjusting the Base Plate (Depth Adjustment)
The base plate can be adjusted for different cutting angles and depths. Refer to the tool's specific locking mechanism for adjustment.
- Unplug the Tool: Ensure the jig saw is unplugged.
- Loosen Base Plate Screws: Locate the screws or levers that secure the base plate. Loosen them sufficiently to allow movement.
- Adjust Angle/Depth: Pivot the base plate to the desired angle (e.g., for bevel cuts) or adjust its position for specific depth requirements. The TS2045565 features depth adjustment.
- Tighten Base Plate: Once the desired setting is achieved, firmly tighten the screws or levers to lock the base plate in position.
6. Operating Instructions
6.1. Basic Operation
- Prepare Workpiece: Secure the material to be cut firmly to a workbench or stable surface using clamps. Mark your cutting line clearly.
- Select Speed: If your model has variable speed control, select an appropriate speed for the material. Lower speeds are generally for harder materials like metal, higher speeds for softer materials like wood. The TS2045565 has a no-load speed of 800-3000 rpm.
- Plug In: Connect the jig saw to a suitable power outlet (220-240V~50/60Hz).
- Start Cut: Place the front edge of the base plate flat on the workpiece, ensuring the blade is clear of the material. Press the trigger to start the motor. Allow the blade to reach full speed before beginning the cut.
- Guide the Tool: Slowly guide the jig saw along your marked cutting line, applying steady, even pressure. Do not force the tool; let the blade do the work.
- Finish Cut: Once the cut is complete, release the trigger and wait for the blade to stop completely before lifting the tool from the workpiece.
6.2. Cutting Different Materials
- Wood: Use a wood-cutting blade. For softwoods, use a higher speed. For hardwoods, a medium speed is often best. The maximum cutting capacity for wood is 55mm.
- Metal: Use a metal-cutting blade. Apply cutting oil for smoother cuts and to prolong blade life. Use a lower speed setting. The maximum cutting capacity for steel is 3mm.
- Plastics: Use a fine-tooth blade. Start with a low speed to prevent melting the plastic, then gradually increase if necessary.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your jig saw.
- Cleaning: After each use, unplug the tool and use a brush or compressed air to remove sawdust and debris from the ventilation slots and blade area. Do not use solvents or abrasive cleaners.
- Blade Care: Inspect blades regularly for sharpness and damage. Replace dull or bent blades immediately to ensure clean cuts and prevent strain on the motor.
- Cord Inspection: Periodically check the power cord for cuts, fraying, or other damage. If damaged, have it repaired by a qualified technician.
- Storage: Store the jig saw in a dry, secure place, out of reach of children. Protect it from direct sunlight and extreme temperatures.
- Lubrication: This tool typically does not require user lubrication. Refer to a professional service center if internal lubrication is suspected to be needed.
8. Troubleshooting
This section addresses common issues you might encounter with your jig saw.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | No power supply; Damaged power cord/plug; Faulty switch | Check power outlet and connections; Inspect cord/plug for damage; Contact service center if switch is faulty. |
| Blade not cutting efficiently or binding | Dull or incorrect blade; Blade not properly installed; Forcing the tool; Incorrect speed setting | Replace blade; Ensure blade is fully seated and clamped; Reduce feed pressure; Adjust speed setting. |
| Excessive vibration or noise | Loose blade; Damaged blade; Internal component issue | Check blade installation; Replace damaged blade; Contact service center for internal issues. |
| Motor overheating | Blocked ventilation slots; Overloading the tool | Clean ventilation slots; Reduce load on the tool; Allow tool to cool down. |
9. Warranty and Support
Total products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, service, or warranty inquiries, please contact your local Total authorized service center or the retailer from whom you purchased the product. Do not attempt to repair the tool yourself, as this may void the warranty and pose safety risks.
For more information, visit the official Total website or consult your purchase documentation.
