LOYALHEARTDY Tabletop Fountain (Style1) Instruction Manual

Introduction

This manual provides instructions for the safe and efficient operation, setup, and maintenance of your LOYALHEARTDY Tabletop Fountain (Style1). This indoor fountain is designed to create a tranquil atmosphere with its simulation landscape modeling, featuring rockeries and trees, and an atomizing humidifier function.

The fountain is crafted from durable resin, offering a lightweight and aesthetically pleasing addition to any home or office environment. Its atomizing feature enhances the visual effect and can also function as a humidifier, with an option to add essential oils.

Package Contents

Please verify that all components are present in the package:

1 x Desktop Fountain unit (Style1)
1 x Light Base (integrated with atomizer for Style1)
1 x Power Line (US Plug 110V)

Setup Instructions

Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
Placement: Choose a stable, level surface for the fountain, away from direct sunlight or heat sources. Ensure there is a power outlet nearby. Place the fountain on a waterproof mat or tray to protect surfaces from potential splashes.
Water Filling: Fill the fountain's reservoir with clean distilled water. Ensure the water level is sufficient to fully submerge the pump and the atomizer, but not so high that it overflows when the pump is running. Refer to the image below for typical water level.
Image: Fountain with water flowing, illustrating the water reservoir and pump area. Ensure the pump is fully submerged.
Pump and Atomizer Connection: Ensure the pump's outlet hose is securely connected to the fountain's water inlet. For the atomizer, ensure it is placed in the designated area within the water reservoir, typically near the light base, and fully submerged.
Power Connection: Connect the power line to the fountain's pump and atomizer. Plug the power adapter into a standard US 110V electrical outlet.

Operating Instructions

Power On: Once plugged in, the fountain pump and atomizer will start automatically. Water will begin to flow, and the atomizer will produce mist, accompanied by LED lighting.
Image: The tabletop fountain in operation, displaying mist and LED illumination.
Atomizer Function: The integrated atomizer generates a fine mist, enhancing the visual appeal and acting as a humidifier. If desired, a few drops of essential oil can be added to the water to diffuse fragrance.
Power Off: To turn off the fountain, simply unplug the power adapter from the electrical outlet.

Maintenance

Water Level: Regularly check the water level. Due to evaporation, water levels will decrease. Refill with distilled water as needed to ensure the pump and atomizer remain fully submerged. Operating the pump or atomizer without sufficient water can cause damage.
Cleaning the Fountain:
1. Unplug the fountain from the power outlet.
2. Drain all water from the reservoir.
3. Clean the fountain surface with a soft cloth and mild soap. Avoid abrasive cleaners that could damage the resin finish.
4. Rinse thoroughly with clean water.
Cleaning the Pump:
1. Disconnect the pump from the fountain and disassemble it according to its specific design (usually involves removing the front cover and impeller).
2. Clean any debris, mineral deposits, or algae from the pump components using a small brush and clean water.
3. Reassemble the pump and reconnect it to the fountain.
Cleaning the Atomizer:
1. Gently wipe the atomizer's ceramic disc with a soft cloth.
2. If mineral buildup occurs, soak the atomizer in a solution of equal parts white vinegar and water for 15-30 minutes, then gently scrub. Rinse thoroughly before re-use.
Water Quality: Use distilled water to minimize mineral buildup and prolong the life of the pump and atomizer. Change the water every few days to prevent algae growth.

Troubleshooting

Problem	Possible Cause	Solution
No water flow or weak flow	Low water level Pump clogged with debris Kinked hose Pump not plugged in or faulty	Add distilled water to the reservoir Clean the pump (refer to Maintenance) Straighten the hose Ensure pump is plugged in; test outlet; replace pump if faulty
Atomizer not producing mist	Low water level Atomizer ceramic disc dirty or damaged Atomizer not plugged in or faulty	Add distilled water to the reservoir (atomizer must be fully submerged) Clean the atomizer (refer to Maintenance); replace ceramic disc if damaged Ensure atomizer is plugged in; test outlet; replace atomizer if faulty
Excessive splashing	Water level too high Fountain not level	Remove some water Adjust fountain placement to a level surface
Unusual noise from pump	Low water level Debris in pump impeller	Add distilled water Clean the pump (refer to Maintenance)

Specifications

Model	Style1
Material	Resin
Voltage	US Plug 110V
Product Dimensions (L x W x H)	7.87" x 5.91" x 11.02" (28 x 20 x 15 cm for Style1)
Weight (Approx.)	1600g (for Style1)
Special Feature	Atomizing Humidifier, LED Lighting, Lightweight

Dimensions of the LOYALHEARTDY Tabletop Fountain, showing length, width, and height measurements. — Image: Diagram illustrating the dimensions of the tabletop fountain.

Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. LOYALHEARTDY products are typically covered by a manufacturer's warranty against defects in materials and workmanship.

For technical support, replacement parts, or further assistance, please contact the seller or LOYALHEARTDY customer service. Contact details are usually available on the product packaging or the official LOYALHEARTDY website.

LOYALHEARTDY Style1