Technical Precision Replacement Battery Instruction Manual

1. Introduction

This document provides essential information for the safe and effective use of your Technical Precision replacement battery, model AX-7ZBW-1. This battery is specifically designed as a replacement for the NUM'AXES CANIFUGUE Mix Version Dog Collar Containment System's collar and fence battery. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of the product.

2. Safety Information

Observe the following safety precautions to prevent damage to the battery, the collar system, or personal injury:

• Do not attempt to open, disassemble, or modify the battery.
• Do not expose the battery to extreme temperatures, direct sunlight, or fire.
• Do not short-circuit the battery terminals.
• Keep the battery out of reach of children and pets.
• Dispose of used batteries according to local regulations. Do not dispose of in household waste.
• If the battery shows signs of damage, swelling, or leakage, discontinue use immediately and dispose of it properly.

3. Package Contents

• 1 x Technical Precision Replacement Battery (Model AX-7ZBW-1)

4. Setup and Installation

Follow these steps to replace the battery in your NUM'AXES CANIFUGUE Mix Version Dog Collar:

1. Identify Battery Compartment: Locate the battery compartment on your NUM'AXES CANIFUGUE dog collar. Refer to your original NUM'AXES CANIFUGUE manual if you are unsure.
2. Open Compartment: Carefully open the battery compartment cover. This may involve unscrewing a small panel or twisting a cap, depending on your specific collar model.
3. Remove Old Battery: Gently remove the old battery from the compartment. Note its orientation (positive and negative terminals) for correct installation of the new battery.
4. Insert New Battery: Insert the Technical Precision replacement battery (Model AX-7ZBW-1) into the compartment, ensuring the correct polarity. The positive (+) and negative (-) terminals must align with the markings inside the compartment.
5. Close Compartment: Securely close the battery compartment cover. Ensure it is properly sealed to protect the battery from moisture and debris.
6. Test Functionality: After installation, the collar should power on. Refer to your original NUM'AXES CANIFUGUE manual for instructions on how to test the collar's functionality and ensure it is working correctly with the containment system.

5. Operating Instructions

Once the replacement battery is installed, the NUM'AXES CANIFUGUE collar should function as intended. This replacement battery provides power to the collar. For detailed instructions on pairing the collar with your containment system, adjusting correction levels, or understanding system indicators, please refer to the original NUM'AXES CANIFUGUE Mix Version Collar Containment System user manual.

6. Maintenance

• Battery Contacts: Periodically inspect the battery contacts within the collar compartment for dirt or corrosion. Clean with a dry, soft cloth if necessary.
• Storage: If the collar will not be used for an extended period, it is recommended to remove the battery and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
• Disposal: Always dispose of depleted batteries responsibly according to local environmental regulations. Do not incinerate or mutilate batteries.

7. Troubleshooting

• Collar Not Powering On After Battery Replacement:
  • Ensure the battery is inserted with the correct polarity (+/-).
  • Verify that the battery compartment cover is securely closed.
  • Confirm the replacement battery is new and not depleted.
  • Check for any visible damage to the battery or collar contacts.
• Shortened Battery Life:
  • Ensure the collar is not being left on unnecessarily.
  • Extreme temperatures can affect battery performance.
  • If the issue persists, it may indicate a problem with the collar unit itself, not the battery. Refer to your original NUM'AXES CANIFUGUE manual or contact their support.

8. Specifications

9. Warranty and Support

This Technical Precision replacement battery comes with a 1-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

For warranty claims, technical assistance, or further inquiries, please contact Technical Precision customer support directly. Please have your product model number (AX-7ZBW-1) and purchase information available when contacting support.