1. Product Overview
The Nora NFP-R413 4-inch New Construction Plate is designed to simplify the installation of canless recessed downlighting fixtures. This frame-in plate assists in accurately indicating the wiring location and provides a precise cutting guide for drywall or ceiling materials, ensuring a clean and professional finish for your lighting installation.
It is compatible with specific Nora luminaires, including models NLTH-41TW-MPW and NFLIN-R407.
2. What's in the Box
- 1 x Nora NFP-R413 4-inch New Construction Plate
Image: The Nora NFP-R413 4-inch New Construction Plate, a rectangular metal plate with a central circular cutout and two elongated rectangular cutouts on either side, designed for recessed lighting installation.
3. Safety Information
WARNING: Always turn off power at the circuit breaker before installing or servicing any electrical fixture. Failure to do so may result in serious injury or death.
- Consult a qualified electrician if you are unsure about any part of the installation process.
- Ensure all wiring connections are secure and comply with local electrical codes.
- Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves during installation.
- This product is intended for indoor use only in dry locations.
4. Installation Instructions
The Nora NFP-R413 New Construction Plate is designed for use in new construction projects before drywall installation. It provides a template for precise placement and cutting of openings for 4-inch canless recessed downlights.
- Prepare the Location: Identify the desired location for your recessed downlight fixture in the ceiling. Ensure there are no obstructions (e.g., joists, pipes, existing wiring) in the installation area.
- Position the Plate: Securely position the NFP-R413 plate onto the ceiling joists or framing members using appropriate fasteners (not included). The plate should be flush with the bottom edge of the framing, where the drywall will eventually be installed.
- Mark Wiring Location: The elongated rectangular cutouts on the plate serve as guides for running electrical wiring. Ensure the electrical supply cable is routed through one of these openings and secured according to local electrical codes.
- Install Drywall: Once the plate is securely fastened and wiring is in place, install the drywall or ceiling material over the framing. The plate will be covered by the drywall.
- Cut Opening: After drywall installation, use the central circular cutout of the plate as a guide to precisely cut the opening for your 4-inch canless recessed downlight. A drywall saw or rotary tool can be used for this step.
- Install Downlight: With the opening cut, proceed to install your compatible 4-inch canless recessed downlight (e.g., Nora NLTH-41TW-MPW, NFLIN-R407) according to its specific instructions.
Note: This plate is a guide for installation and does not contain electrical components. All electrical connections must be made by a qualified individual following applicable codes.
5. Operating Instructions
The Nora NFP-R413 New Construction Plate is a passive installation accessory. It does not have any operational functions itself. Its purpose is fulfilled during the construction and installation phase by providing a precise template for recessed lighting placement and wiring access. Once the downlight is installed, the plate remains concealed within the ceiling structure.
6. Maintenance
No maintenance is required for the Nora NFP-R413 New Construction Plate as it is a static component installed within the ceiling structure. Ensure that the plate is not bent or damaged during handling and installation to maintain its structural integrity and accuracy as a guide.
7. Troubleshooting
As a non-electrical, passive component, the NFP-R413 plate typically does not require troubleshooting. If issues arise during installation, consider the following:
- Incorrect Opening Size: Ensure you are using the correct 4-inch downlight fixture for this plate. Verify the plate was used as a precise guide for cutting.
- Plate Not Flush: If the plate is not flush with the framing, re-secure it to ensure a level surface for drywall installation.
- Wiring Access Issues: Confirm that wiring was routed correctly through the designated openings before drywall installation.
For issues related to the downlight fixture itself, refer to the specific instruction manual for that luminaire.
8. Specifications
| Model Number: | NFP-R413 |
| Size: | 4 inches (for compatible downlights) |
| Material: | Copper (as per product data, though typically galvanized steel for these plates) |
| Manufacturer: | Nora Lighting |
| Intended Use: | New construction frame-in for canless recessed downlighting |
9. Warranty Information
Warranty information for the Nora NFP-R413 New Construction Plate is typically provided by the manufacturer, Nora Lighting. Please refer to the official Nora Lighting website or contact their customer service for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase.
10. Customer Support
For technical assistance, product inquiries, or warranty claims, please contact Nora Lighting customer support directly. Contact information can usually be found on the manufacturer's official website or on the product packaging.
Alternatively, you may contact the seller from whom you purchased this product for assistance.
