GALAX PRO 20V Cordless Drill Driver Model 95605 User Manual

Introduction

Thank you for choosing the GALAX PRO 20V Cordless Drill Driver, Model 95605. This powerful and versatile tool is designed for various drilling and screwdriving applications in wood, metal, and plastic. To ensure safe and efficient operation, please read this manual thoroughly before first use and keep it for future reference.

General Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Always wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves. Ensure the tool is switched off before making any adjustments, changing accessories, or storing it. Keep children and bystanders away while operating a power tool.

Package Contents

Verify that all items listed below are included in your package:

1 x GALAX PRO 20V Cordless Drill Driver (Model 95605)
1 x 20V 1300mAh Li-ion Battery
1 x Battery Charger
2 x Driver Bits
3 x Drill Bits
1 x Belt Clip
1 x User Manual

Setup and Assembly

1. Charging the Battery

Before first use, fully charge the Li-ion battery. Connect the charger to a standard power outlet and then connect the battery to the charger. The indicator light on the charger will show the charging status. Once fully charged, disconnect the battery from the charger.

2. Attaching and Detaching the Battery

To attach the battery, slide it into the base of the drill handle until it clicks securely into place. To detach, press the release buttons on the sides of the battery pack and slide it out.

3. Installing Drill Bits or Driver Bits

The drill features a 10mm keyless chuck for easy bit changes.

Rotate the chuck collar counter-clockwise to open the jaws.
Insert the desired drill bit or driver bit into the chuck.
Rotate the chuck collar clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and firmly held.

GALAX PRO 20V Cordless Drill Driver with a drill bit installed in the chuck — **Figure 1:** The GALAX PRO 20V Cordless Drill Driver with a drill bit inserted into the 10mm keyless chuck. The chuck is designed for quick and secure bit changes.

Operating Instructions

1. Power On/Off and Variable Speed Trigger

Press the trigger switch to turn the drill on. The speed is variable and controlled by the amount of pressure applied to the trigger. Pressing lightly results in lower speed, while pressing fully results in maximum speed.

GALAX PRO 20V Cordless Drill Driver showing LED working light and variable speed control — **Figure 2:** The drill features an integrated LED working light that illuminates the work area when the trigger is pressed. The variable speed trigger allows for precise control over drilling and driving speed.

2. Forward/Reverse Rotation and Lock-Off Switch

The forward/reverse switch is located above the trigger. Push it to the left for forward rotation (drilling/screwing in) and to the right for reverse rotation (removing screws). When the switch is in the center position, the trigger is locked, preventing accidental startup.

Close-up of the GALAX PRO drill showing the forward/reverse selector button and lock position — **Figure 3:** The forward/reverse button allows selection of rotation direction. The center position locks the trigger for safety during storage or bit changes.

3. 2-Speed Gear Selector

The drill features a 2-speed gearbox for optimal performance across different tasks. The gear selector switch is located on top of the drill housing.

Gear 1 (0-400 RPM): Provides higher torque and lower speed, ideal for heavy-duty screwdriving and drilling large holes.
Gear 2 (0-1500 RPM): Provides higher speed and lower torque, suitable for fast drilling and light-duty screwdriving.

Always select the appropriate gear before starting the operation. Do not change gears while the drill is running.

GALAX PRO drill showing the 2-speed gear selector with settings 0-400 RPM and 0-1500 RPM — **Figure 4:** The 2-speed gear selector allows users to choose between high torque (0-400 RPM) and high speed (0-1500 RPM) modes for various applications.

4. Torque Adjustment Collar (19+1 Settings)

The torque adjustment collar allows you to set the desired torque for screwdriving applications. This prevents overtightening screws and damaging the workpiece or screw head. There are 19 torque settings plus a drill mode setting.

Settings 1-19: Lower numbers for smaller screws and softer materials, higher numbers for larger screws and harder materials.
Drill Symbol: For drilling applications, this setting bypasses the clutch and provides maximum torque.

Rotate the collar to align the desired setting with the indicator mark on the drill body.

5. Applications

The GALAX PRO 20V Cordless Drill Driver is suitable for:

Screwdriving: Furniture assembly, appliance repair, general fastening tasks. Use appropriate driver bits and torque settings.
Drilling: Creating holes in wood, metal, and plastic. Use appropriate drill bits and the drill mode setting on the torque collar.

GALAX PRO drill being used for screwdriving, showing furniture assembly and general fastening — **Figure 5:** The drill driver is effective for various screwdriving applications, including furniture assembly and home appliance repair.

GALAX PRO drill being used for drilling into wood and concrete, demonstrating its versatility — **Figure 6:** This 2-speed drill driver provides optimal power for drilling into various materials such as wood, metal, and masonry.

Maintenance

Cleaning: Keep the ventilation openings of the tool clean to prevent overheating. Use a soft, damp cloth to clean the housing. Do not use harsh chemicals or abrasive cleaners.
Battery Care: Store the battery in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Charge the battery periodically if not in use.
Bit Maintenance: Ensure drill bits and driver bits are sharp and in good condition for optimal performance and safety.
Storage: When not in use, store the drill driver and its accessories in a dry, secure place out of reach of children.

Troubleshooting

Problem	Possible Cause	Solution
Drill does not start.	Battery not charged or improperly installed. Forward/reverse switch in lock-off position.	Charge battery and ensure it is securely installed. Move forward/reverse switch to forward or reverse position.
Reduced power or speed.	Battery charge is low. Incorrect gear selected.	Recharge the battery. Select a lower gear (Gear 1) for higher torque.
Bit slips in chuck.	Chuck not tightened sufficiently. Bit shank is dirty or damaged.	Retighten the chuck firmly. Clean or replace the bit.
Overheating during use.	Blocked ventilation slots. Excessive load on the tool.	Clean ventilation slots. Reduce pressure or use a larger drill bit. Allow tool to cool.

Specifications

Model:	95605
Brand:	GALAX PRO
Voltage:	20 Volts
Battery Type:	Lithium-ion
Battery Capacity:	1300 mAh (1.3 Ah)
No-Load Speed (Gear 1):	0-400 RPM
No-Load Speed (Gear 2):	0-1500 RPM
Maximum Torque:	30 Nm
Torque Settings:	19 + 1 (Drill Mode)
Chuck Size:	10 mm (Keyless)
Weight (with battery):	Approximately 1.6 kg
Material:	Metal (chuck), Plastic (housing)

Warranty Information

GALAX PRO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official GALAX PRO website. Keep your purchase receipt as proof of purchase for any warranty claims.

Customer Support

If you have any questions, require technical assistance, or need to order replacement parts, please contact GALAX PRO customer support. Contact information can typically be found on the official GALAX PRO website or on the packaging of your product.

GALAX PRO 95605