hizpo 10.1 Inch Android 12 Car Radio Stereo User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your hizpo 10.1 Inch Android 12 Car Radio Stereo. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Figure 1.1: hizpo 10.1 Inch Android 12 Car Radio Stereo Interface

2. Safety Information

• Do not operate the device in a manner that distracts you from driving. Always prioritize road safety.
• Ensure all wiring is correctly connected to prevent short circuits or damage.
• Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Do not attempt to disassemble or modify the unit. Refer all servicing to qualified personnel.
• Keep the volume at a level that allows you to hear external traffic sounds.

3. Package Contents

Verify that all items listed below are included in your package:

• Head Unit (10.1 inch display)
• Frame 1
• Frame 2
• Power Cable
• GPS Antenna
• 6 Pin USB Cable
• 4 Pin USB Cable
• External Microphone
• Canbus Decoder Box
• RCA Harness
• Radio Antenna Adapter
• Rear Camera Input RCA Cable
• User Manual (this document)

Figure 3.1: Included Accessories

4. Setup and Installation

4.1 Pre-Installation Checks

• Ensure your vehicle is compatible with the unit (Dodge Ram 1500/2500/3500, 2009-2012).
• Disconnect the vehicle's battery before starting installation to prevent electrical damage.
• Gather all necessary tools (screwdrivers, wire strippers, electrical tape, etc.).

4.2 Installation Steps

1. Carefully remove the original car radio and dashboard trim.
2. Connect the power cable, RCA harness, USB cables, GPS antenna, and other necessary wires to the new head unit. Refer to the wiring diagram provided with the power cable for specific connections.
3. Mount the head unit into the dashboard opening using the provided frames.
4. Reconnect the vehicle's battery and test the unit's basic functions (power, audio, touchscreen).
5. Securely reattach all dashboard trim.

Figure 4.1: Before and After Installation Comparison

Figure 4.2: Product Dimensions and Components

5. Operating Instructions

5.1 Basic Operation

• Power On/Off: Press and hold the power button on the front panel or steering wheel control.
• Volume Control: Adjust using the physical buttons on the unit or steering wheel controls.
• Touchscreen: Navigate the interface by tapping, swiping, and pinching on the QLED display.

5.2 CarPlay and Android Auto

Connect your smartphone via USB or wirelessly to access CarPlay (for iOS devices) or Android Auto (for Android devices). This allows for integrated navigation, music, calls, and messaging.

Figure 5.1: CarPlay and Android Auto Support

5.3 GPS Navigation

The unit comes with pre-installed North America maps. Access the navigation application from the main menu. Ensure the GPS antenna is properly installed for optimal signal reception.

5.4 Bluetooth Connectivity

Pair your mobile phone via Bluetooth for hands-free calling and audio streaming. Go to the Bluetooth settings on the head unit, enable Bluetooth on your phone, search for the device, and pair.

5.5 Steering Wheel Control (SWC)

The unit supports original steering wheel controls. Access the SWC settings in the system menu to program or verify button functions for music, volume, and other features.

Figure 5.2: Steering Wheel Control Configuration

5.6 Day and Night Mode

The system supports automatic and manual switching between day and night display modes. Day mode provides higher brightness for clear visibility in sunlight, while night mode reduces glare for comfortable viewing in low light conditions.

Figure 5.3: Day Mode and Night Mode Display

5.7 Split Screen Functionality

Utilize the split-screen feature to run two applications simultaneously, such as navigation and music playback. This enhances multitasking capabilities while driving.

Figure 5.4: Split Screen Operation

5.8 Digital Sound Processor (DSP)

The built-in DSP (BU32107EFV) allows for advanced audio customization. Access the DSP settings to adjust equalizer presets, sound field, and other audio parameters to optimize your listening experience.

Figure 5.5: DSP Audio Settings

5.9 Rearview Camera Input

Connect an AHD rearview camera to the designated input. The display will automatically switch to the camera view when the vehicle is in reverse gear, aiding in parking and maneuvering.

Figure 5.6: AHD Rearview Camera Input

5.10 Weather Display

Access the weather application to view local weather conditions and forecasts, updated periodically.

Figure 5.7: Weather Display Feature

5.11 Picture-in-Picture (PIP)

The PIP function allows you to watch video content in a small, resizable window while using other applications on the main screen.

Figure 5.8: Picture-in-Picture Functionality

5.12 Original Car Information Display (Canbus)

If your vehicle supports it and the Canbus decoder box is correctly installed, the unit can display original car information. Access these settings in the system menu.

Figure 5.9: Canbus Type Settings

6. Maintenance

6.1 Cleaning the Screen

Use a soft, lint-free cloth slightly dampened with water or a screen cleaner specifically designed for electronic displays. Avoid harsh chemicals or abrasive materials that could damage the screen.

6.2 Software Updates

Periodically check the manufacturer's website or the unit's system settings for available software updates. Keeping the software updated ensures optimal performance and access to new features.

7. Troubleshooting

If you encounter issues with your device, refer to the following common problems and solutions:

• No Power:
  • Check all power connections and fuses.
  • Ensure the vehicle's battery is charged.
• No Sound:
  • Verify speaker connections.
  • Check volume levels and mute settings.
  • Ensure the correct audio source is selected.
• GPS Not Working/Inaccurate:
  • Ensure the GPS antenna is properly connected and has a clear view of the sky.
  • Check GPS settings in the navigation application.
• Bluetooth Connection Issues:
  • Ensure Bluetooth is enabled on both the head unit and your phone.
  • Delete previous pairings and try reconnecting.
  • Move the phone closer to the unit.
• Screen Flickering or Dim:
  • Check the brightness settings in the display menu.
  • Ensure the unit is not overheating (the cooling fan should be operating).
  • If the issue persists, contact customer support.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

This hizpo product is covered by a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

9.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact hizpo customer support. Refer to the contact information provided on the product packaging or the official hizpo website.