Introduction
The TRENDnet TMO-312C MoCA 2.5 Ethernet Over Coax Adapter utilizes existing coaxial cables to establish a high-speed network connection within your home or office. This adapter supports MoCA 2.5 standards, providing reliable digital TV, high-speed internet, and VoIP services with improved packet error rate technology for consistent bandwidth and reduced latency.
Package Contents
- One (1) TRENDnet TMO-312C MoCA 2.5 Ethernet Over Coax Adapter
- Quick Installation Guide
- Power adapter (12V, 1A)
Product Features
- Device Interface: 1 x MoCA Coax (F-Type Female coax input); 1 x RJ-45 Gigabit LAN port.
- MoCA 2.5 Standard: Compliant with Multimedia over Coax Alliance (MoCA 2.5) standards.
- Gigabit Port: Features an RJ-45 Gigabit LAN port with up to 1Gbps net throughput.
- Network Expansion: Uses existing coaxial wiring to extend your Ethernet network.
- Multi-Device Support: Supports up to 16 nodes on one MoCA network.
- Compact Design: Lightweight housing suitable for various installations.
- Compatibility: Backwards compatible with MoCA 2.0/1.1/1.0 standards.
- Compliance: NDAA + TAA compliant.
Setup and Installation
Follow these steps to set up your TRENDnet TMO-312C MoCA 2.5 Ethernet Over Coax Adapter:
-
Step 1: Connect the First Adapter to Your Router.
Connect one MoCA adapter to your internet router. Use an Ethernet cable to connect the adapter's LAN port to an available Ethernet port on your router. Then, connect a coaxial cable from the adapter's MoCA Coax port to a coaxial wall outlet near your router.
-
Step 2: Connect the Second Adapter in Another Room.
In another room where you need a wired Ethernet connection, connect a second MoCA adapter. Connect a coaxial cable from the adapter's MoCA Coax port to a coaxial wall outlet in that room.
-
Step 3: Connect Your Device.
Use an Ethernet cable to connect the second MoCA adapter's LAN port to your network-enabled device (e.g., computer, gaming console, smart TV).
-
Step 4: Power On and Verify.
Connect the power adapters to both MoCA devices and plug them into electrical outlets. Verify that the LAN, MoCA, and Power LEDs on both adapters are lit, indicating a successful connection.
Image: Easy Setup Diagram. This image visually guides through the setup process, from connecting the first adapter to the router and coax, to connecting the second adapter to coax and a device, and finally verifying the LED indicators.
A typical home network setup using MoCA adapters is shown below:
Image: Internet via Coax with 2.5G MoCA Adapters. This diagram shows a router in one room connected to a MoCA adapter, which uses the home's coaxial wiring to extend the network to other rooms where additional MoCA adapters connect to devices like laptops and smart TVs.
Operating Instructions
Once the MoCA adapters are properly installed and powered on, they will automatically establish a network connection over your existing coaxial cables. The adapters function as a transparent bridge, extending your Ethernet network without requiring additional configuration. Any device connected to the LAN port of a MoCA adapter will receive network access as if it were directly connected to your router via an Ethernet cable.
The LED indicators provide status information:
- Power LED: Indicates the power status of the adapter.
- MoCA LED: Indicates the status of the MoCA connection over the coaxial cable. A solid light typically means a successful MoCA link.
- LAN LED: Indicates the status of the Ethernet connection to your device. A solid light means a successful Ethernet link, and blinking indicates data activity.
Image: Front view of the TMO-312C adapter. This image displays the front panel of the adapter with its LED indicators for LAN, MoCA, and Power, which show the operational status.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the adapter. Do not use liquid or aerosol cleaners.
- Ventilation: Ensure the adapter is placed in a well-ventilated area to prevent overheating. Do not block the ventilation slots.
- Environment: Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Cable Management: Ensure all coaxial and Ethernet cables are securely connected and not excessively bent or strained.
Troubleshooting
| Problem | Solution |
|---|---|
| No Power LED. | Ensure the power adapter is securely connected to the MoCA device and a working electrical outlet. Try a different outlet. |
| MoCA LED is off or blinking. |
|
| LAN LED is off. | Ensure the Ethernet cable is securely connected between the MoCA adapter and your network device. Try a different Ethernet cable or device. |
| Slow network speeds. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | TMO-312C |
| Brand | TRENDnet |
| Hardware Interface | Ethernet |
| Color | Black |
| Product Dimensions (L x W x H) | 4.4" x 3.5" x 1" |
| Item Weight | 4 ounces |
| Data Link Protocol | Ethernet |
| Data Transfer Rate | 2.5 Gigabits per second (MoCA 2.5) |
| UPC | 710931503159 |
For a detailed comparison of TRENDnet MoCA adapters, refer to the following image:
Image: MoCA Ethernet Over Coax Adapters Comparison. This table compares different TRENDnet MoCA adapter models, highlighting their specifications, special features (like 2-pack), and port configurations. The TMO-312C is a single MoCA 2.5 adapter with one MoCA Coax and one RJ-45 Gigabit LAN port.
Warranty and Support
The TRENDnet TMO-312C Ethernet Over Coax MoCA 2.5 Adapter is backed by a 3-year TRENDnet Manufacturer Protection warranty.
For technical assistance, TRENDnet provides reliable tech support with English-speaking advisors and experts available during normal business hours. Please refer to the official TRENDnet website for contact information and further support resources.