Philips Sparkling Water Maker

Introduction

Thank you for choosing the Philips Sparkling Water Maker. This manual provides essential information for the safe and efficient use of your new appliance. Please read it thoroughly before first use and keep it for future reference.

The Philips Sparkling Water Maker allows you to create fresh, carbonated water at home with ease. Its sleek design and electricity-free operation make it a convenient addition to any kitchen. Enjoy customizing your carbonation levels and creating a variety of sparkling beverages.

Image: Philips Sparkling Water Maker in white, showcasing its compact and modern design.

Important Safety Information

• Read all instructions before using the appliance.
• Do not carbonate anything other than plain water. Carbonating other liquids can cause overflow, pressure buildup, and potential injury.
• Only use CO2 cylinders and carbonating bottles approved by Philips or compatible with the device.
• Do not place the appliance near heat sources or in direct sunlight.
• Keep out of reach of children.
• Ensure the carbonating bottle is securely attached before carbonating.
• Never remove the carbonating bottle during carbonation.

What's Included

Your Philips Sparkling Water Maker package includes the following components:

• 1 x Sparkling Water Maker (Premium Stylish wrap finishing)
• 1 x BPA-Free 1L Carbonating Bottle with airtight sealed lid

Note: A CO2 Carbonator/Cylinder is NOT included and must be purchased separately. The device is compatible with any standard screw-in 60L CO2 exchange carbonator.

Image: The Philips Sparkling Water Maker and its included BPA-free 1L carbonating bottle, along with a small instruction leaflet.

Setup

1. Installing the CO2 Cylinder

Before first use, rinse the carbonating bottle. To install the CO2 cylinder:

1. Place the sparkling water maker on a flat, stable surface.
2. Remove the back cover of the appliance by gently pulling it.
3. Insert the CO2 cylinder into the designated compartment at the back of the machine.
4. Twist the cylinder clockwise until it is firmly tightened. Do not overtighten.
5. Replace the back cover.

2. Preparing the Carbonating Bottle

For best results, always use cold, clean water.

1. Fill the BPA-free 1L carbonating bottle with cold, clean water. Ensure the water level is between the marked 'Min' and 'Max' filling lines on the bottle.
2. Twist the carbonating bottle into the machine's nozzle until it is securely locked in place.

Image: A hand filling the Philips carbonating bottle with water, showing the 'Min' and 'Max' fill lines.

Operating Instructions

Carbonating Water

Follow these steps to carbonate your water:

1. Ensure the CO2 cylinder is installed and the carbonating bottle is filled with cold water and securely attached.
2. Press the button downwards firmly for 2-3 seconds until you hear a buzzing sound from the valve. This indicates the carbonation process.
3. Release the button.
4. Repeat steps 2-3 times to customize the carbonation level to your preference. For stronger carbonation, press more times.
5. Once carbonation is complete, unscrew the bottle from the machine.

Image: A visual guide showing four steps to achieve optimal carbonation: filling the bottle, using cold water, pressing the button, and repeating for desired fizz.

Tips for Best Bubbles

• Always use very cold water. Cold water absorbs CO2 more effectively, resulting in better carbonation.
• Do not over-carbonate. Excessive carbonation can lead to gas waste and may not improve fizz.

Adding Flavors

Always add flavors or fruit slices after carbonating the water. Adding them before carbonation can cause foaming and potential mess.

Maintenance

Cleaning

• Appliance: Wipe the exterior of the sparkling water maker with a damp cloth. Do not immerse the appliance in water.
• Carbonating Bottle: Hand wash the carbonating bottle with lukewarm water and mild dish soap. Do not wash in a dishwasher or use hot water, as this can damage the bottle.
• Drip Tray: The drip tray can be removed and rinsed with water.

Troubleshooting

Specifications

Image: The Philips Sparkling Water Maker with its slim design and key dimensions highlighted.

Warranty and Support

For warranty information, product registration, or technical support, please refer to the official Philips website or contact Philips customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

You can visit the Philips Store on Amazon for more products and information: Philips Store