1. Introduction
Thank you for choosing the goobay 53880 LED Floodlight with Motion Sensor. This 20W outdoor floodlight provides 1700 lumens of neutral white light (4000 K) and features an integrated PIR motion sensor. Designed for outdoor use, it is suitable for illuminating house entrances, garages, carports, and pathways. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.
2. Safety Instructions
Please read these safety instructions carefully before installation and operation. Keep this manual for future reference.
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before any installation or maintenance work. The operating voltage is 230 V (AC), 50 Hz. This product is Protection Class I, meaning it must be earthed.
- Outdoor Use: The floodlight is designed for outdoor use with an IP65 rating, providing protection against dust ingress and low-pressure water jets. Ensure all connections are properly sealed to maintain this rating.
- Non-Dimmable: This LED floodlight is not dimmable. Do not connect it to a dimmer switch.
- Heat: The LED floodlight may become warm during operation. Do not touch the surface directly when in use.
- Light Source: The light source of this luminaire is not replaceable; when the light source reaches its end of life, the entire luminaire shall be replaced.
- Mounting: Ensure the mounting surface is stable and can support the weight of the floodlight.
3. Package Contents
Verify that all components are present in the package:
- 1x goobay 53880 LED Floodlight with Motion Sensor
- Mounting bracket (pre-attached)
- Instruction Manual
4. Product Overview
Familiarize yourself with the components and features of your goobay 53880 LED Floodlight.
Figure 4.1: Front view of the goobay 53880 LED Floodlight with Motion Sensor. The LED panel is visible, and it has an adjustable mounting bracket.
Figure 4.2: An illustration highlighting the main features of the goobay 53880 LED Floodlight. Icons represent 24 SMD-LEDs, 20W power, 1700 lumens, IP44 splash protection, a maximum detection range of 10 meters at 180 degrees, and an M16 cable gland for connection.
Figure 4.3: A side-by-side view of the goobay 53880 LED Floodlight showing its compact dimensions: 130 mm in width, 174 mm in height, and 69 mm in depth, including the bracket.
Figure 4.4: A close-up diagram of the floodlight, detailing the LED light source (SMD 2835, 1700 lm, 4000 K neutral white, 100° beam angle) and the PIR sensor (light sensitivity 5-2000 lx, 180° detection angle, max. 10 m range, recommended installation height 2.3-3 m).
Figure 4.5: A detailed image of the PIR sensor's underside, showing three rotary controls for adjusting 'Range' (1-10m), 'Light Duration' (5-600s), and 'Light Sensitivity' (5-2000lx). An additional ON/OFF switch is visible for disabling the motion sensor function.
Figure 4.6: An illustration demonstrating the M16 cable gland connection for the goobay 53880. It shows the plug-in function for quick and easy installation, suitable for cable diameters between 4 and 10 mm.
5. Setup and Installation
Follow these steps for safe and proper installation of your floodlight.
- Preparation: Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Mounting Location: Choose a suitable wall-mounting location. The recommended installation height for optimal motion sensor performance is between 2.3 and 3 meters. The stable, beveled mounting bracket allows for rotation up to 180 degrees to direct the light as needed.
- Mounting: Securely attach the floodlight's mounting bracket to the wall using appropriate screws and wall plugs (not included).
- Wiring: The floodlight uses an M16 cable gland for connection. This gland features a practical plug-in function for quick and easy wiring. It is suitable for cable diameters between 4 and 10 mm. Connect the live (L), neutral (N), and earth (PE) wires correctly. Ensure all connections are tight and properly insulated to maintain the IP65 rating.
- Adjust Angle: Once mounted, adjust the floodlight's angle using the bracket to illuminate the desired area.
- Power On: Restore power to the circuit.
6. Operating Instructions
The goobay 53880 LED Floodlight operates automatically via its PIR motion sensor. You can adjust the sensor's settings to suit your needs.
6.1 Motion Sensor Adjustment
The PIR sensor has three adjustable controls located on its underside (refer to Figure 4.5):
- RANGE (Detection Range): Adjusts the maximum detection distance from 1 to 10 meters. Turn the knob to increase or decrease the range.
- TIME (Light Duration): Sets how long the light remains on after motion is detected, from 5 to 600 seconds (10 minutes). Turn the knob to adjust the duration.
- LUX (Light Sensitivity): Determines the ambient light level at which the sensor becomes active. Settings range from 5 lx (darkness) to 2000 lx (daylight). Turn the knob to select the desired sensitivity. For example, setting it to a low LUX value means the light will only activate in near darkness.
6.2 Motion Sensor ON/OFF Switch
The floodlight includes an ON/OFF switch for the motion sensor function. This allows you to disable the motion sensor and use the floodlight as a normal, continuously-on outdoor light if desired. When the switch is in the 'OFF' position, the motion sensor is bypassed, and the light will remain on as long as power is supplied.
Note: This floodlight is not dimmable.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your floodlight.
- Cleaning: Clean the floodlight's surface and the sensor lens periodically with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor. Ensure the power is off before cleaning.
- Inspection: Periodically check the mounting bracket and wiring for any signs of wear, damage, or loose connections. Address any issues promptly.
- Light Source: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire unit must be replaced.
8. Troubleshooting
If you encounter issues with your floodlight, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light stays on continuously. |
|
|
| Light flickers or blinks. |
|
|
| Motion sensor is unreliable or too sensitive. |
|
|
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | 53880 |
| Brand | goobay |
| Power Consumption | 20 W |
| Luminous Flux | 1700 lm (nominal 1706 lm) |
| Luminous Efficacy | 85 lm/W |
| Color Temperature | 4000 K (Neutral White) |
| Color Rendering Index (CRI) | 81 Ra |
| Beam Angle | 100° |
| LED Type | SMD 2835 (24 LEDs) |
| Operating Voltage | 230 V (AC) |
| Input AC Frequency | 50 Hz |
| Power Factor | 0.9 |
| Start-up Time | Max. 0.1 s |
| Life Span | 25,000 hours |
| Switching Cycles | 15,000 |
| Protection Class | I |
| IP Rating | IP65 (Dust tight, protected against water jets) |
| Material | Aluminum, Glass, Metal, Plastic |
| Color | White |
| Dimensions (L x W x H) | 7 x 18 x 14 cm |
| Weight | 525 g |
| Motion Sensor Type | Passive Infrared (PIR) |
| PIR Detection Angle | 180° |
| PIR Detection Range | Max. 10 m (adjustable 1-10m) |
| PIR Light Sensitivity | Adjustable 5 - 2000 lx |
| PIR Delay Time | Adjustable 5 - 600 s |
| Recommended Installation Height | 2.3 - 3 m |
| Cable Gland | M16 (for cable diameter 4-10 mm) |
| Energy Efficiency Class | F |
| Certification | CE, RoHS |
10. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer at the time of purchase. If you experience any issues with your goobay 53880 LED Floodlight that cannot be resolved using the troubleshooting guide, please contact your point of purchase or goobay customer support for assistance. Spare parts availability information is not available.
11. Environmental Information
This product is designed with energy efficiency in mind. It has an energy efficiency class of F and contains 0 mg of mercury.
Figure 11.1: The EU energy efficiency label for the goobay 53880 LED Floodlight, indicating an energy efficiency class of F and a consumption of 20 kWh/1000h. A QR code for the EPREL database is also visible.
For detailed product information regarding energy efficiency, you can scan the QR code on the energy label or visit the EPREL database directly:
EPREL Product Information (QR/680974)
Please dispose of this product responsibly at the end of its life cycle, in accordance with local regulations for electronic waste. Do not dispose of it with general household waste.
