1. Introduction
Thank you for choosing the YEELIGHT Under Cabinet Motion Sensor Light. This product is designed to provide convenient, energy-efficient lighting for various indoor spaces. Featuring motion and light sensing capabilities, adjustable brightness, and a rechargeable battery, it offers a versatile lighting solution. Please read this manual carefully before use to ensure proper installation and operation.
Image 1.1: Overview of the YEELIGHT Under Cabinet Motion Sensor Light's key features.
2. Product Overview
2.1 Key Features
- Automatic Motion & Light Sensor: Detects movement in dark environments to automatically turn on/off.
- Type-C Rechargeable: Built-in 1100mAh battery with fast Type-C charging.
- Adjustable Brightness: Dimmable from 10% to 100% in Always-On mode.
- Wireless & Magnetic Installation: Easy to install on iron surfaces or with included 3M adhesive.
- Non-glare & Eye-caring: Advanced anti-glare panel for soft, comfortable light.
- Durable Construction: Anodized aluminum shell.
2.2 Package Contents
- YEELIGHT Under Cabinet Motion Sensor Light
- Type-C Charging Cable
- 3M Adhesive Pads
- User Manual
3. Setup and Installation
The YEELIGHT Under Cabinet Light offers flexible installation options due to its magnetic design.
3.1 Magnetic Installation
- Identify a suitable ironwork surface (e.g., metal cabinet, refrigerator side).
- Simply place the light onto the surface. The built-in magnets will secure it in place.
3.2 Adhesive Installation (for non-iron surfaces)
- Clean the desired installation surface thoroughly to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the 3M adhesive pad.
- Attach the adhesive pad to the back of the light or to the desired surface.
- Peel off the remaining protective film from the adhesive pad.
- Press the light firmly onto the cleaned surface for at least 30 seconds.
The magnetic design allows for easy removal of the light for charging or repositioning.
Image 3.1: Illustration of easy magnetic installation.
4. Operating Instructions
The light features a multi-function switch to control its modes and brightness.
4.1 Changing Operating Modes
Single press the switch to cycle through the following modes:
- Mode 1 (AUTO Mode): The blue indicator light illuminates. In this mode, the light will automatically turn on when motion is detected within 13 feet in sufficiently dark conditions. It will turn off after approximately 20 seconds of no activity.
- Mode 2 (Always On Mode): The indicator light turns off. In this mode, the light remains continuously on.
- Mode 3 (Always Off Mode): The light is completely off.
Image 4.1: Automatic motion sensor activation in a dark environment.
4.2 Adjusting Brightness (Stepless Dimming)
To adjust the brightness:
- Ensure the light is in Always On Mode (Mode 2).
- Long press the switch. The brightness will gradually change.
- Release the switch when the desired brightness level (from 10% to 100%) is reached.
Image 4.2: Stepless dimming feature in action.
4.3 Charging the Battery
The light is equipped with a built-in 1100mAh rechargeable battery and a Type-C charging port.
- When the battery is low, the indicator light may flash or the light output will diminish.
- Connect the provided Type-C charging cable to the light's charging port and to a standard USB power source (e.g., phone charger, computer USB port).
- During charging, the indicator light will be red.
- Once fully charged, the indicator light will turn off.
A full charge typically provides approximately 5 hours of use in Always On mode or up to 2 months in AUTO mode, depending on activation frequency.
Image 4.3: Type-C charging and battery life indication.
5. Maintenance
To ensure the longevity and optimal performance of your YEELIGHT Under Cabinet Motion Sensor Light, follow these maintenance guidelines:
- Cleaning: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- Battery Care: For best battery life, avoid completely draining the battery frequently. Charge the light regularly, especially if it will be stored for an extended period.
- Environment: Use the light in indoor environments only. Avoid exposure to extreme temperatures, high humidity, or direct water contact, as it is not water-resistant.
- Sensor Area: Keep the motion sensor clear of obstructions to ensure accurate detection.
6. Troubleshooting
If you encounter issues with your YEELIGHT Under Cabinet Motion Sensor Light, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on in AUTO mode. | Insufficient darkness; no motion detected; battery low. | Ensure the environment is dark enough. Move within the sensor's range (13 feet). Charge the battery. |
| Light stays on constantly in AUTO mode. | Constant motion in sensor range; light sensor malfunction. | Ensure no continuous motion is present. Try moving the light to a different location. |
| Light does not charge. | Faulty cable or power adapter; charging port issue. | Try a different Type-C cable and USB power adapter. Ensure the cable is fully inserted. |
| Short battery life. | Frequent activation in AUTO mode; used in Always On mode; aging battery. | Reduce frequency of motion detection if possible. Note that Always On mode consumes battery faster. Ensure full charge. |
| Light is not bright enough. | Brightness setting is low; battery low. | Adjust brightness in Always On mode (see Section 4.2). Charge the battery. |
If the problem persists after trying these solutions, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | YLBGD-0044 |
| Dimensions | 7.87"L x 1.5"W x 0.35"H (20cm x 3.8cm x 0.9cm) |
| Item Weight | 5.6 ounces (158.7 grams) |
| Power Source | Battery Powered |
| Battery Type | 1 Lithium Ion battery (included), 1100mAh |
| Charging Port | Type-C USB |
| Light Source Type | LED (32 LEDs) |
| Color Temperature | 4000 Kelvin (Cool White) |
| Brightness | Up to 100 Lumens (Dimmable 10%-100%) |
| Motion Sensor Range | Up to 13 feet |
| Material | Acrylonitrile Butadiene Styrene, Aluminum |
| Installation Type | Magnetic Mount, Under Cabinet |
| Indoor/Outdoor Usage | Indoor Only |
| Water Resistance Level | Not Water Resistant |
8. Warranty and Support
YEELIGHT provides a 24-month quality assurance for this product. If you have any questions, concerns, or require assistance with your YEELIGHT Under Cabinet Motion Sensor Light, please do not hesitate to contact our customer support team. We are committed to ensuring your satisfaction.
For support, please refer to the contact information provided with your purchase or visit the official YEELIGHT website.
