1. Introduction and Overview
This instruction manual provides detailed guidance for installing and operating your LIGHTAILING LED light kit for the LEGO 10284 Camp Nou – FC Barcelona building blocks model. This kit is designed to enhance the visual appeal of your model by illuminating various sections.
The light kit includes 2 USB light kits, a connector, an instruction guide, and a battery box. Please note that the LEGO model set itself is NOT included with this light kit.
Image 1: The LEGO 10284 Camp Nou model illuminated by the LIGHTAILING LED light kit, showcasing the vibrant lighting effects on the stadium structure and field.
2. Package Contents
Before beginning installation, please verify that all components are present:
- 2 x USB Light Kits
- 1 x Connector
- 1 x Instruction Guide
- 1 x Battery Box
Please ensure you have three AA batteries ready, as they are required for operation and are not included in the kit. A USB charger (voltage less than 5V) can also be used as an alternative power source.
Image 2: The LIGHTAILING LED light kit packaging, displaying the included components such as the light kits, battery box, and instruction manual.
3. Setup and Installation
The installation of the light set is designed to be flexible and can be adapted to your preference. Follow the included instruction guide for detailed steps. Exercise care during installation to avoid damage to the delicate wiring.
- Handle with Care: Install the LED lights carefully. Avoid hard pulling, bending, or shaking the wires and components.
- Power Source: Connect the light kit to either a battery box requiring three AA batteries (not included) or a USB charger with a voltage less than 5V. Higher voltage can damage the lights.
- Integration: Integrate the lights into your LEGO 10284 Camp Nou model according to the visual guide provided in the kit.
Image 3: Various components of the LIGHTAILING LED light kit, illustrating the small size and intricate nature of the lights and wiring for precise installation.
Image 4: A visual comparison showing the LEGO Camp Nou model unlit on the left and fully illuminated with the LIGHTAILING LED kit on the right, highlighting the dramatic transformation.
4. Operating Instructions
Once the light kit is fully installed and connected to a power source (either batteries or a USB charger), simply activate the power source to illuminate your LEGO model. There are no complex controls; the lights will turn on when power is supplied.
- Power On: Insert three AA batteries into the battery box and switch it on, or connect the USB cable to a compatible 5V USB power source.
- Power Off: Switch off the battery box or disconnect the USB cable.
Video 1: An official LIGHTAILING video demonstrating the LED light kit installed on the LEGO 10284 Camp Nou model, showcasing the lighting effects and overall illuminated appearance.
5. Maintenance
To ensure the longevity and optimal performance of your LIGHTAILING LED light kit, follow these maintenance guidelines:
- Cleaning: Gently dust the lights and wires with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
- Handling: Continue to handle the illuminated model with care to prevent stress on the wires and connections.
- Storage: If storing the model for an extended period, disconnect the power source (remove batteries or unplug USB) to prevent battery leakage or unnecessary power consumption.
6. Troubleshooting
If your LIGHTAILING LED light kit is not functioning as expected, consider the following common issues and solutions:
- Lights Not Turning On:
- Check if the power source is correctly connected and functioning (e.g., fresh batteries, USB charger plugged in).
- Ensure all connectors are securely plugged into the main board and individual light kits.
- Verify that the voltage of your USB charger is less than 5V.
- Some Lights Not Working:
- Inspect the wiring for any kinks, cuts, or loose connections.
- Gently re-seat any affected light components or connectors.
- Flickering Lights:
- Ensure the power source is stable and providing consistent power.
- Check for any loose connections that might be causing intermittent contact.
If problems persist after attempting these solutions, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | LIGHTAILING |
| Compatible Model | LEGO 10284 Camp Nou – FC Barcelona |
| Light Source Type | LED |
| Power Source | Battery Powered (3 AA batteries required, not included) or USB (Voltage < 5V) |
| Number of Light Sources | 2 USB light kits |
| Material | Plastic |
| Item Weight | 5.6 ounces (160 Grams) |
| Product Dimensions | 6.69"L x 6.69"W x 1.57"H (packaging dimensions) |
| Recommended Age | 6 years and up |
8. Warranty and Support
LIGHTAILING specializes in custom-designed lighting kit toys and aims to supply customers with quality products and services. If you encounter any problems or have questions regarding your light kit, please do not hesitate to contact us. We are committed to ensuring a happy shopping experience and providing support for your creations.
For further assistance, please refer to the contact information provided with your purchase or visit the official LIGHTAILING store online.
