AGV LIGHTING CH001G Modern K9 Crystal Chandelier Instruction Manual

1. Introduction

Thank you for choosing the AGV LIGHTING CH001G Modern K9 Crystal Chandelier. This elegant lighting fixture is designed to enhance the aesthetic of your living space. This manual provides essential information for the safe and proper assembly, installation, operation, and maintenance of your new chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference.

2. Safety Information

• Electrical Safety: Always turn off the main power supply at the circuit breaker before installing, cleaning, or replacing bulbs. Failure to do so may result in electric shock, injury, or death.
• Professional Installation: For your safety, it is highly recommended that this fixture be installed by a qualified, licensed electrician.
• Handling Crystals: Handle crystal components with care to prevent chipping or breakage. Wear gloves during assembly to avoid fingerprints.
• Weight: Ensure the ceiling junction box and mounting hardware can support the weight of the chandelier.
• Bulb Type: Use only E12 base candle bulbs, maximum 60W per bulb. LED E12 bulbs are recommended for energy efficiency. Do not exceed the recommended wattage.
• Dimmable Functionality: This fixture is dimmable when used with dimmable bulbs and a compatible dimmer switch (not included).

3. Package Contents

Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are satisfied with the product. Refer to the image below for a visual representation of the parts included.

Figure 1: All components of the AGV LIGHTING CH001G Chandelier laid out, including the main frame, crystal elements, chain, and mounting hardware.

Ensure all parts are present before proceeding with assembly. If any parts are missing or damaged, please contact customer support.

4. Assembly Instructions

The chandelier requires assembly of its various components before final installation. Follow these steps carefully. For a visual guide, please refer to the official installation video provided below.

4.1. Chandelier Body Assembly

1. Carefully attach the chandelier arms to the central body. Ensure all connections are secure.
2. Thread the electrical wires through the central column and arms as per the wiring diagram.
3. Secure the candle sleeves onto the bulb sockets.

Figure 2: Close-up view of the white candle sleeves installed on the chandelier arms, ready for bulbs.

4.2. Attaching Crystal Elements

The chandelier features various crystal elements that need to be attached to the frame. Refer to the provided diagrams or the installation video for the correct placement of each crystal type.

• Attach the crystal chains and pendants to the designated hooks on the chandelier arms and central column.
• Ensure all crystal pieces are securely fastened.

Figure 3: Detailed view of the K9 crystal elements, including beads and pendants, attached to the gold-finished frame of the chandelier.

5. Installation Instructions

Before proceeding, ensure the main power supply is turned off at the circuit breaker. It is strongly recommended to have a licensed electrician perform the installation.

1. Mounting Bracket: Secure the mounting bracket to the ceiling junction box using the provided screws.
2. Chain and Wiring: Determine the desired hanging height. Adjust the chain length accordingly. Thread the electrical wires through the chain and canopy.
3. Electrical Connections: Connect the chandelier's wires to the household electrical wires according to local electrical codes. Typically, connect live to live (black to black), neutral to neutral (white to white), and ground to ground (green/bare copper to green/bare copper). Use wire nuts to secure connections.
4. Canopy Installation: Carefully lift the chandelier and secure the canopy to the mounting bracket, ensuring all wires are tucked safely inside.
5. Bulb Installation: Install 5 E12 base candle bulbs (not included) into the sockets.
6. Restore Power: Once installation is complete, restore power at the circuit breaker and test the chandelier.

Figure 4: Diagram illustrating the dimensions of the chandelier, including a diameter of 20 inches, height of 18 inches, and an adjustable chain length of up to 59 inches.

6. Operating Instructions

To operate your AGV LIGHTING CH001G Chandelier, simply use the wall switch connected to the fixture. If you have installed dimmable E12 bulbs and a compatible dimmer switch, you can adjust the light intensity to your preference.

• Power On/Off: Use the standard wall switch to turn the chandelier on or off.
• Dimming: If a dimmer switch is installed, rotate or slide the dimmer control to adjust the brightness.

7. Maintenance

Regular maintenance will help preserve the beauty and functionality of your chandelier.

• Cleaning: Turn off the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the metal frame. For crystal components, use a soft, lint-free cloth dampened with a mild glass cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the finish or crystals.
• Bulb Replacement: Ensure the power is off and bulbs have cooled before attempting to replace them. Unscrew the old bulb and screw in a new E12 base candle bulb (max 60W).

8. Troubleshooting

If you encounter issues with your chandelier, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact a qualified electrician or AGV LIGHTING customer support.

9. Specifications

10. Warranty and Support

This AGV LIGHTING product comes with a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or contact AGV LIGHTING customer service directly. Contact information can typically be found on the product packaging or the manufacturer's official website.