1. Important Safety Information
Please read these instructions carefully before installing or using the Artika Swirl Ribbon LED Flush Mount Ceiling Light. Retain this manual for future reference.
- Electrical Safety: Always turn off the main power supply at the circuit breaker before beginning installation, maintenance, or cleaning. Ensure all electrical connections comply with local codes and ordinances. If you are unsure about wiring, consult a qualified electrician.
- Grounding: This fixture must be properly grounded to reduce the risk of electric shock.
- Fixture Handling: Handle the fixture with care. Do not apply excessive force to the LED ribbons.
- Dimmers: Use only LED-compatible dimmers as specified in the product specifications. Incompatible dimmers may cause flickering or damage to the fixture.
- Indoor Use Only: This fixture is designed for indoor use in dry locations. Do not expose to water or excessive moisture.
2. What's Included
Verify that all components are present before proceeding with installation.
- Artika Swirl Ribbon LED Flush Mount Light Fixture
- Mounting Hardware (screws, wire connectors, mounting bracket)
- Instruction Manual
Image: The Artika Swirl Ribbon LED Flush Mount Light Fixture, showing its integrated LED design.
3. Installation Instructions
Follow these steps for safe and proper installation of your flush mount ceiling light.
- Turn Off Power: Locate the circuit breaker controlling the light fixture's power supply and turn it off. Verify power is off using a voltage tester.
- Remove Old Fixture (if applicable): Carefully remove any existing light fixture, disconnecting wires and removing the mounting bracket.
- Install Mounting Bracket: Attach the provided mounting bracket to the junction box in the ceiling using the screws. Ensure it is securely fastened.
- Wire Connections: Connect the fixture's wires to the household electrical wires. Match black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Secure connections with wire connectors.
- Attach Fixture: Carefully lift the light fixture and align it with the mounting bracket. Secure the fixture to the bracket using the provided screws. Ensure no wires are pinched.
- Restore Power: Once the fixture is securely installed, turn the power back on at the circuit breaker.
Image: The Artika Swirl Ribbon light fixture installed on a ceiling in a bedroom setting.
4. Operating Instructions
The Artika Swirl Ribbon LED Flush Mount Light is designed for simple operation.
- Turning On/Off: Use a standard wall switch to turn the light fixture on or off.
- Dimming Functionality: This fixture is dimmable. To utilize the dimming feature, ensure you have an LED-compatible dimmer switch installed. Adjust the dimmer switch to achieve your desired brightness level.
5. Maintenance
Regular maintenance helps preserve the appearance and functionality of your light fixture.
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
- No Bulb Replacement: This fixture features integrated LED lights, which are designed for long-term use and do not require bulb replacement.
6. Troubleshooting
If you experience issues with your light fixture, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wire connection. Faulty wall switch. | Check the circuit breaker. Ensure all wire connections are secure (power off first). Test the wall switch. |
| Light flickers or dims improperly. | Incompatible dimmer switch. Loose wire connection. | Ensure an LED-compatible dimmer is used. Check wire connections (power off first). |
| Light is too dim or too bright. | Dimmer setting. | Adjust the dimmer switch to your preferred brightness. |
If the issue persists after attempting these solutions, please contact Artika customer support.
7. Specifications
Detailed technical specifications for the Artika Swirl Ribbon LED Flush Mount Ceiling Light.
| Feature | Detail |
|---|---|
| Model Number | FM-SR-BL |
| Power Consumption | 28 Watts |
| Brightness | 1400 Lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| Material | Aluminum |
| Finish | Matte Black |
| Product Dimensions | 19.69"L x 19.69"W x 7.87"H (50cm L x 50cm W x 20cm H) |
| Average Life | 50,000 Hours |
| Dimmable | Yes (with compatible LED dimmer) |
| Installation Type | Flush Mount |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Indoor |
Image: The Artika Swirl Ribbon light fixture displaying its approximate dimensions of 50 cm (19.7 in) in width and 20 cm (7.9 in) in height.
8. Product Overview Video
Watch this video for an overview of Artika's product development and design philosophy.
Video: An official video from Artika showcasing their approach to product development and design, featuring various lighting fixtures.
9. Warranty and Support
For warranty information or technical support, please contact Artika customer service. Refer to your purchase documentation for specific warranty terms and conditions.
- Manufacturer: Artika for living inc
- Contact: Please visit the official Artika website or refer to the contact information provided with your product packaging for support.
