Hanaix Projection Digital Alarm Clock User Manual

Introduction

Thank you for purchasing the Hanaix Projection Digital Alarm Clock. This device combines a digital alarm clock with a projection feature, USB charging port, and displays temperature and humidity. It is designed to provide convenience and functionality for your bedroom or home office. Please read this manual carefully before operating the device to ensure proper use and to maximize its features.

Image: The Hanaix Projection Digital Alarm Clock, showing its large LED display, projection arm, and a connected smartphone charging via its USB port, alongside a power adapter.

Product Features

• 180° Rotatable Projection: Projects time clearly onto your wall or ceiling with an adjustable focus ring.
• Dual Alarms & Snooze: Set two independent alarms with 15 adjustable volume levels. Features a 5-minute snooze function.
• Sleep/Wake Timer: Auto-off function for 5 to 90 minutes, allowing for light music or news playback.
• USB Charging Port: Conveniently charge your smartphone or other digital devices.
• Memory Function: Built-in CR2 battery (included) preserves time and settings during power outages.
• 7.3" Large LED Display: Clear time visibility, even for those with impaired vision.
• Mirror Screen: The display surface doubles as a functional mirror.
• Adjustable Brightness: Four levels of display brightness and three levels for projection brightness.
• Temperature & Humidity Display: Shows current indoor temperature and humidity.
• FM Radio: Built-in FM radio with frequency range 76-108 MHz.

Package Contents

Please check the package for the following items:

• Hanaix Projection Digital Alarm Clock (Model: AC-03)
• USB Power Cable
• Power Adapter
• CR2 Backup Battery (pre-installed)
• User Manual

Image: The product packaging, showing the alarm clock, USB cable, power adapter, and user manual laid out.

Setup

1. Power Connection: Connect the provided USB power cable to the clock's USB power input port (located at the back). Plug the other end into the power adapter, then into a standard wall outlet. The clock display will light up.
2. Backup Battery: The CR2 backup battery is pre-installed. This battery maintains time and alarm settings during a power outage, but does not power the display.
3. Initial Setup: Upon first power-on, the clock may display a default time. Proceed to the "Operating Instructions" section to set the correct time and date.

Operating Instructions

Image: Detailed diagram showing the front display with time, temperature, and humidity, and the top and back panels with labeled buttons (SET, VOL, AL, SNOOZE/LIGHT, UP/PROJECT, DOWN) and ports (USB Charging, Radio Antenna, Loudspeaker box, Memory battery compartment).

1. Setting Time and Date

1. Press and hold the "SET" button for 3 seconds to enter time setting mode. The hour digits will flash.
2. Use the "UP / PROJECT" or "DOWN" buttons to adjust the hour.
3. Press "SET" again to confirm the hour and move to minute setting. Adjust minutes using "UP / PROJECT" or "DOWN".
4. Continue pressing "SET" to cycle through and set Year, Month, Day, and 12/24H format.
5. Press "SET" one last time or wait 10 seconds for the settings to save automatically.

2. Setting Alarms (Dual Alarms)

Image: The clock display showing two different alarm times (6:30 and 8:00) and the corresponding buttons for setting them.

1. Short press the "AL" button to select Alarm 1 or Alarm 2. The corresponding alarm icon will appear.
2. Press and hold the "AL" button for 3 seconds to enter alarm setting mode. The alarm hour will flash.
3. Use "UP / PROJECT" or "DOWN" to adjust the alarm hour. Press "AL" to confirm.
4. Adjust the alarm minutes similarly. Press "AL" to confirm.
5. Next, select the alarm sound source: Buzzer or FM Radio. Use "UP / PROJECT" or "DOWN" to choose. Press "AL" to confirm.
6. To activate/deactivate an alarm, short press the "AL" button until the desired alarm icon (AL1 or AL2) appears/disappears on the display.

3. Projection Function

Image: The alarm clock projecting the time in red digits onto a bedroom wall, demonstrating its 180-degree rotation capability.

• Short press the "UP / PROJECT" button to turn the projection ON or OFF.
• Press and hold the "UP / PROJECT" button for 3 seconds to rotate the projected image 180 degrees.
• Adjust the focus of the projected image by rotating the focus control ring on the projection arm.
• The projection brightness can be adjusted by repeatedly pressing the "SNOOZE / LIGHT" button (when the projection is active). There are 3 brightness levels.

4. Display Brightness Adjustment

Image: The clock display shown at 100% light, 60% light, 25% light, and completely off, illustrating the four brightness switching options.

• Repeatedly short press the "SNOOZE / LIGHT" button to cycle through the four display brightness levels: 100% Light, 60% Light, 25% Light, and OFF.
• The clock also features an automatic dimming sensor that adjusts brightness based on ambient light.

5. FM Radio Operation

• Extend the radio antenna located at the back of the clock for better reception.
• Short press the "RADIO / SLEEP" button to turn the FM radio ON or OFF.
• When the radio is ON, press "UP / PROJECT" or "DOWN" to manually tune the frequency.
• Press and hold "UP / PROJECT" or "DOWN" to auto-scan for the next available station.
• Adjust the volume using the "VOL" button and then "UP / PROJECT" or "DOWN".

6. USB Charging Port

Image: A close-up view of the USB charging port located on the side of the alarm clock, with a smartphone connected for charging.

The USB charging port (located on the back) can be used to charge your smartphone, tablet, or other USB-powered devices. Simply connect your device's charging cable to this port.

7. Snooze Function

When an alarm sounds, press the large "SNOOZE / LIGHT" button on top of the clock to activate the snooze function. The alarm will pause for 5 minutes and then sound again. To stop the alarm completely, press any other button.

8. Sleep Timer Function

When the FM radio is playing, short press the "RADIO / SLEEP" button repeatedly to set a sleep timer (5 to 90 minutes). The radio will automatically turn off after the set duration.

Maintenance

• Cleaning: Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: If the backup battery (CR2) needs replacement, open the battery compartment on the back of the clock and replace it with a new CR2 battery, observing polarity.
• Placement: Place the clock on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.

Troubleshooting

Specifications

Image: A diagram illustrating the physical dimensions of the alarm clock, including its width (7.3 inches), height (3 inches), and the projection height (3.5 inches).

Warranty and Support

This Hanaix Projection Digital Alarm Clock comes with a 1-Year Limited Warranty from the date of purchase. Additionally, a 1-Month Money Back Guarantee is offered.

For any issues, questions, or support needs, please contact Hanaix customer service. We provide 24-hour, 7-day service to assist you.

Please retain your purchase receipt for warranty claims.