Introduction
This manual provides essential instructions for setting up and operating your VIZIO XRT260 TV Remote Control. This remote is designed for seamless compatibility with VIZIO V and M Series TV models, including V505-J09 and M65Q6-J09. Please read these instructions carefully to ensure proper use and to maximize your viewing experience.
Product Overview
The VIZIO XRT260 remote control features an ergonomic design with clearly labeled buttons for intuitive navigation and control of your VIZIO television. Below is an illustration of the remote with key button functions.
Figure 1: VIZIO XRT260 Remote Control with button functions labeled.
- Power Button: Turns the television on or off.
- Input Button: Changes the currently displayed input source.
- App Launcher Buttons (Peacock, Netflix, Prime Video, Disney+, Crackle, Tubi): Quickly launch the corresponding streaming applications.
- SmartCast Home Button: Launches or returns to the SmartCast Home screen.
- WatchFree+™ Button: Accesses free streaming channels.
- Menu Button: Displays the television's settings menu.
- Navigation Buttons (Up, Down, Left, Right, OK): Navigate on-screen menus and select highlighted options. The OK/Play/Pause button also plays or pauses content.
- Back Button: Returns to the previous on-screen menu or screen.
- Voice Button: Push and hold to activate voice commands.
- CC (Closed Caption) Button: Enables or disables closed captions. Long press to open accessibility menu features like captions, talk back, speech rate, and zoom mode.
- Volume Up/Down Buttons: Increases or decreases the audio loudness.
- Mute Button: Turns the audio on or off.
Setup
1. Battery Installation
The VIZIO XRT260 remote control requires two (2) 1.5V AAA batteries (not included). To install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 2: Back of the remote control with the battery compartment.
2. Initial Pairing (for Voice Control)
The VIZIO XRT260 remote control is designed to work immediately with compatible VIZIO TVs without programming for basic functions. However, to enable voice control features, pairing is required. Follow these steps:
- Ensure your TV is powered on.
- On the remote, press and hold the Microphone button and the Mute button simultaneously for approximately 3 to 5 seconds.
- A light near the top of the remote will flash, indicating it's in pairing mode.
- On your TV screen, a message will appear prompting you to select "Pair Remote". Press the OK button on the remote.
- Follow any additional on-screen instructions to complete the pairing process. The TV will display a confirmation message upon successful pairing.
Figure 3: Pairing instructions for the VIZIO XRT260 remote control.
Note: If pairing is unsuccessful, try unpairing any previously connected remotes from your TV's settings menu (Menu > System > Voice Remote > Unpair Remote) before attempting to pair the new remote again.
Operating Instructions
Once batteries are installed and the remote is paired (if voice control is desired), you can begin using your VIZIO XRT260 remote control to manage your television.
- Basic Functions: Use the Power, Input, Volume, and Mute buttons for fundamental TV control.
- Navigation: Use the directional pad and OK button to navigate menus, select options, and control media playback.
- Quick App Access: Press any of the dedicated app buttons (Peacock, Netflix, Prime Video, Disney+, Crackle, Tubi) to instantly launch your favorite streaming services.
- Voice Control: Press and hold the Microphone button, then speak your command clearly. Release the button when finished speaking.
- SmartCast Home: Press the Home button to access VIZIO's SmartCast platform.
- WatchFree+: Press the WatchFree+ button to explore free streaming channels.
Troubleshooting
If you encounter issues with your VIZIO XRT260 remote control, please refer to the following common solutions:
- Remote Not Responding:
- Check if the batteries are correctly installed and have sufficient charge. Replace with new AAA batteries if necessary.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Voice Control Not Working:
- Confirm the remote is properly paired with your TV. Refer to the "Initial Pairing" section above.
- If previously paired, try unpairing and re-pairing the remote: Go to your TV's Menu > System > Voice Remote > Unpair Remote. Once unpaired, follow the "Initial Pairing" steps to pair it again.
- App Buttons Not Launching Apps:
- Ensure your VIZIO TV is connected to the internet.
- Check if the apps are installed and updated on your SmartCast TV.
Specifications
| Feature | Detail |
|---|---|
| Brand | VIZIO |
| Model Name | XRT260 |
| Compatible Devices | Television (Vizio V and M Series, e.g., V505-J09, M65Q6-J09) |
| Connectivity Technology | Infrared |
| Special Feature | Ergonomic, Voice Control |
| Controller Type | Button Control |
| Button Quantity | 25 |
| Battery Type | AAA (2 required, not included) |
| Maximum Range | 10 Meters |
| Item Weight | 0.07 Kilograms |
Official Product Video
Watch this video for a visual guide on the VIZIO XRT260 remote control, including unboxing and basic setup.
Video: Vizio OEM Replacement Remote Control - Unboxing and Setup Guide.
Warranty and Support
This product is eligible for returns within 30 days of purchase, in accordance with the seller's return policy.
For technical assistance or if your specific TV model is not listed as compatible, please contact the seller, Sourcing Remote, for further support. Their technical team can assist you in finding the correct remote for your television.
For general VIZIO product support, please visit the official VIZIO website or refer to your television's user manual.
