SwellPro Fisherman Drone FD1 User Manual

Introduction

The SwellPro Fisherman Drone FD1 is a waterproof unmanned aerial vehicle designed for fishing applications. It enables shore-based anglers to extend casting range and deploy baits up to 2kg. This manual provides essential information for the safe and effective operation and maintenance of your SwellPro Fisherman Drone FD1.

What's in the Box

Verify that all components are present upon unboxing:

• 1x SwellPro Fisherman Drone FD1 Aircraft
• 1x Remote Controller
• 2x (pair) Propellers
• 1x Drone Battery
• 1x Balance Charger
• 1x Micro USB Cable
• 1x PL1-F Payload Release Mechanism

Image: The SwellPro Fisherman Drone FD1, an orange and black waterproof drone with four propellers and landing gear.

Setup

1. Propeller Installation

Carefully attach the propellers to the corresponding motor shafts. Ensure they are securely fastened according to the markings (e.g., CW for clockwise, CCW for counter-clockwise) to prevent detachment during flight.

2. Battery Charging and Installation

Before first use, fully charge the drone battery using the provided balance charger and Micro USB cable. Once charged, insert the battery into the drone's designated compartment, ensuring a secure connection.

3. Remote Controller Preparation

Install the required batteries (not always included, check packaging) into the remote controller. Power on the controller and ensure it pairs successfully with the drone before attempting flight.

4. Pre-Flight Checks and Calibration

Always perform pre-flight checks. This includes verifying propeller security, battery levels for both drone and remote, and checking for any physical damage. Calibrate the compass and other sensors as instructed in the quick start guide to ensure accurate navigation and stable flight. The elevated GPS and altimeter pod design enhances precision and reduces interference.

Operating the Drone

Basic Flight Controls

Familiarize yourself with the remote controller's joysticks and buttons. Practice basic maneuvers in an open, safe area away from obstacles, people, and animals. The drone features Auto-Landing for safe descent.

Payload Release (PL1-F)

Image: The PL1-F Payload Release mechanism, a grey and black device designed to attach to the drone for dropping bait.

The PL1-F payload release allows for precise deployment of fishing baits or lines. Attach the payload securely to the mechanism. Operate the release function via the remote controller when the drone is positioned over the desired drop zone. The drone can carry payloads up to 2kg.

Sky-Trolling Feature

The Sky-Trolling feature allows the drone to tow your fishing line to attract pelagic fish. For enhanced safety and line protection, consider using the optional TrollSafe release device, which automatically releases the line upon a strike. Adjust TrollSafe sensitivity based on fishing conditions.

Image: An aerial view showing the orange SwellPro drone on a sandy beach surrounded by several fish, illustrating its use in fishing.

Image: A person on a beach holding a large fish and the SwellPro Fisherman Drone, demonstrating successful fishing with the drone.

Wind Resistance

The drone's propulsion system and flight computer are optimized for flight in winds up to Beaufort Force 7. Always assess wind conditions before flight to ensure safe operation.

Anti-Pendulum Feature

When carrying a payload, drones may exhibit a pendulum motion. The Anti-Pendulum Feature on the Fisherman Drone reduces this effect by controlling acceleration and deceleration, leading to more stable payload delivery.

Waterproof Design

The SwellPro Fisherman Drone is designed to be waterproof, allowing for operation near and over water bodies. Ensure all seals and covers are properly secured before exposing the drone to water.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your drone.

• Cleaning: After each use, especially in sandy or saltwater environments, thoroughly clean the drone. Pay close attention to motors, propeller mounts, and any crevices to remove sand, salt, or debris. Sand can cause wear and tear on moving parts.
• Battery Care: Store batteries in a cool, dry place. Do not overcharge or over-discharge. If storing for extended periods, charge to approximately 50% capacity.
• Propeller Inspection: Regularly inspect propellers for cracks, chips, or deformation. Replace damaged propellers immediately to maintain flight stability and safety.
• General Inspection: Periodically check all screws, connections, and structural components for looseness or damage.

Troubleshooting

This section addresses common issues you might encounter.

• Drone Not Powering On: Ensure the battery is fully charged and correctly installed. Check for any visible damage to the battery or drone's power port.
• Remote Controller Not Connecting: Verify both the drone and remote controller are powered on. Ensure they are within range and attempt to re-pair them according to the quick start guide.
• Unstable Flight/Drifting: Perform a compass and IMU calibration. Check propellers for damage or incorrect installation. Ensure the drone is free of debris, especially sand, which can affect motor performance.
• Payload Release Malfunction: Check the connection of the PL1-F unit to the drone. Ensure no debris is obstructing the release mechanism.
• GPS Signal Issues: Ensure you are in an open area with a clear view of the sky. Avoid flying near large metal structures or strong electromagnetic interference.

If issues persist, contact SwellPRO customer support for further assistance.

Specifications

Warranty and Support

SwellPRO products are covered by a manufacturer's warranty. For detailed warranty information, product support, or service inquiries, please refer to the official SwellPRO website or contact their customer service department directly. Keep your proof of purchase for warranty claims.