1. Important Safety Information
Before assembly and use, please read all instructions carefully. Keep this manual for future reference.
- Ensure the chair is assembled correctly and all fasteners are tightened securely before use.
- Do not exceed the maximum weight limit of 150 kg (330 lbs).
- Avoid standing on the chair or using it as a step stool.
- Keep children away from the assembly area. Small parts may pose a choking hazard.
- Regularly check all bolts and screws to ensure they remain tight. Retighten as necessary.
2. Product Components
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Chair Seat (with upholstered cushion)
- Beech Wood Legs (4 per chair)
- Mounting Hardware (screws, washers, Allen key)
Image: Detailed view of chair components, highlighting the seat, cushion, and leg connections.
3. Assembly Instructions
Assembly typically takes 5-15 minutes per chair. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
- Attach Legs to Seat: Align each beech wood leg with the corresponding mounting points on the underside of the chair seat. Ensure the legs are oriented correctly, with the wider part facing outwards.
- Secure Legs: Insert the provided screws with washers into the pre-drilled holes. Hand-tighten all screws initially.
- Final Tightening: Once all legs are in place, use the Allen key to fully tighten all screws. Do not overtighten, as this may damage the wood.
- Check Stability: Place the assembled chair on a flat surface and gently test its stability. If it wobbles, check that all screws are evenly tightened.
Image: Diagram illustrating chair dimensions for assembly reference.
4. Operating Instructions
These chairs are designed for comfortable seating in various indoor environments.
- Intended Use: Suitable for dining rooms, kitchens, living rooms, and office spaces.
- Ergonomic Design: The ergonomic backrest and padded artificial leather cushion provide comfort for extended periods.
- Stability: The robust beech wood legs ensure stability during use.
Image: Illustration of the ergonomic backrest design.
Image: Cushion comfort features: resilience, elasticity, and air permeability.
5. Maintenance and Care
Proper care will extend the life and appearance of your chairs.
- Cleaning: Wipe clean with a damp cloth. For the artificial leather cushion, use a mild soap solution if necessary, then wipe dry. Avoid harsh chemicals or abrasive cleaners.
- Wood Care: The beech wood legs can be cleaned with a dry or slightly damp cloth. Avoid excessive moisture.
- Regular Inspection: Periodically check all screws and bolts for tightness and re-tighten as needed to maintain structural integrity.
- Floor Protection: The chair legs are equipped with anti-slip and silent pads to protect your floors. Ensure these pads are intact and replace if worn.
Image: Anti-slip and silent leg pad detail.
6. Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Screws are not evenly tightened. | Place the chair on a flat surface. Loosen all leg screws slightly, then sit on the chair to distribute weight evenly. Re-tighten all screws firmly. |
| Difficulty inserting screws during assembly. | Misalignment of parts. | Ensure the legs are correctly aligned with the mounting points. Do not force screws; gently adjust the leg position until the screw fits easily. |
| Squeaking noise during use. | Loose connections or friction between parts. | Check and tighten all screws. If the noise persists, apply a small amount of silicone lubricant to the joints where the legs meet the seat. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | DEWINNER |
| Model Number | YUJINXIANG-HEISE-4-T |
| Dimensions (L x W x H) | 45 x 43 x 83 cm (17.7 x 16.9 x 32.7 inches) |
| Seat Height | 39 cm (15.4 inches) |
| Seat Width | 46 cm (18.1 inches) |
| Backrest Height | 44 cm (17.3 inches) |
| Material (Seat) | Artificial Leather (Upholstered) |
| Material (Legs/Frame) | Solid Beech Wood |
| Color | Black |
| Weight Capacity | 150 kg (330 lbs) |
| Product Weight (per chair) | Approximately 4.875 kg (19.5 kg for 4 chairs) |
| Assembly Required | Yes (minimal assembly) |
| Intended Use | Indoor |
8. Warranty and Support
DEWINNER is committed to providing high-quality products and customer satisfaction.
- Warranty Information: For specific warranty details, please refer to the documentation included with your purchase or contact DEWINNER customer service.
- Customer Support: If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact DEWINNER customer support through the retailer where you purchased the product.